V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements in the circuit a) R=30 ohm, L=30 mH b) R=30 ohm, C=33.3 micro farads c) R=40 ohm, L=30 mH d) R=40 ohm, L=33.3 micro farads

V=100Sin (1000t+46 deg), I=2Sin (1000t+80 deg) what are the elements
in the circuit
a) R=30 ohm, L=30 mH
b) R=30 ohm, C=33.3 micro farads
c) R=40 ohm, L=30 mH
d) R=40 ohm, L=33.3 micro farads
by

1 Answer

Answer :

Ans: R=40 ohm, L=33.3 micro farads
by

Related questions

Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t-pi//4)`. Match the following table, `{:(,

Description : Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t-pi//4)`. Match the following table, `{:(,

Last Answer : Instantaneous voltage and instantaneoss current in an L-R circuit in AC is V=100sin (100)t and `i=10sin(100t ... power in one cycle",(S),"None"):}`

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Description : Calculate the characteristics impedance for a transmission line having L=0.5 mH/Km, C=0.08 µF and negligible R and G.

Last Answer : L=0.5 mH/Km C=0.08 µF

AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits develop resistance, inductance, and capacitance. The inductive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : AC circuits possess characteristics of resistance, inductance, and capacitance. The capacitive reactance of a circuit is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: A

A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts.

Description : A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser?

Last Answer : A capacitor of capacitance 50 micro farads is charged to a potential difference of 200 Volts. Find out energy stored in the condenser? 1 joule

If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Description : If permissible working stresses in steel and concrete are respectively 1400 kg/cm2 and 80 kg/cm2 and modular ratio is 18, in a beam reinforced in tension side and of width 30 cm and having effective depth 46 cm, the lever arms of the section, is (A) 37 cm (B) 38 cm (C) 39 cm (D) 40 cm

Last Answer : Answer: Option D

A contract is to be completed in 46 days and 117 men were set to work, each working 8 hours a day. After 33 days, 4/7 of the work completed. How many additional men may be employed so that the work may be completed in time, each man now working 9 hours a day? a) 79 b) 80 c) 81 d) 82 e) 83

Description : A contract is to be completed in 46 days and 117 men were set to work, each working 8 hours a day. After 33 days, 4/7 of the work completed. How many additional men may be employed so that the work may be completed in time, each man now working 9 hours a day? a) 79 b) 80 c) 81 d) 82 e) 83

Last Answer : work finished by 33 days = 33 117 8 = 30888 man hours 4/7th of the job is finished. remaining work = 1-(4/7) = 3/7 if 4/7th of the work is 30888 hours, then 3/7th of the work = [30888 ... 9 number of men = 198 since, 117 men are already working, additional men required = 198 - 117 = 81 Answer: c)

Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Description : Find the time constant in a series R-L circuit when the resistance is 4 ohm and the inductance is 2 H. a) 0.25 b) 0.2 c) 2 d) 0.5

Last Answer : d) 0.5

In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choose t

Description : In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choose t

Last Answer : In an L-C -R search circuit connected to an AC source `V=V_(0)sin(100pi+(pi)/(6))``V_(R)=40V, V_ ... (a) and (b) are correct D. Both a and b are wrong

In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Description : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L)=40 and V_(C )=10V`, resistance `R=4Omega` Choos

Last Answer : In an L-C -R series circuit connected to an AC source `V=V_(0)sin(100pi(t)+(pi)/(6))``V_(R)=40V, V_(L) ... (2) A` C. `20sqrt(2) A` D. `25sqrt(2) A`

A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is ...

Description : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is (A) 300 W (B) 150 W (C) 45 W (D) 20 W

Last Answer : A d.c. source has an open circuit voltage of 30 V and an internal resistance of 1.5 Ohm. A resistive load is connected to the source. Maximum power dissipated in the load is 150 W

In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied

Description : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is (A) 70 V (B) 50 V (C) 60 V (D) 100 V

Last Answer : In an AC circuit, the voltage across R, L and C are 30 V, 60 V and 20 V respectively. The applied voltage is 50 V

In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, Federal Regulations (46 CFR) require the maximum fuse rating for that branch to be _________. EL-0013 A. 80% of the connected load B. 15 amps C. 20 amps D. 30 amps

Description : In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, Federal Regulations (46 CFR) require the maximum fuse rating for that branch to be _________. EL-0013 A. 80% of the connected load B. 15 amps C. 20 amps D. 30 amps

Last Answer : Answer: C

In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, 46 CFR requires the maximum fuse rating for that branch to be _________. EL-0013 A. 15 amps B. 80% of the connected load C. 20 amps D. 30 amps

Description : In the illustration if BRANCH NO. 1 is a lighting circuit for crew's berthing, 46 CFR requires the maximum fuse rating for that branch to be _________. EL-0013 A. 15 amps B. 80% of the connected load C. 20 amps D. 30 amps

Last Answer : Answer: C

The capacity of a storage battery is measured in ______________. A. volts B. ampere-hours C. farads D. amps

Description : The capacity of a storage battery is measured in ______________. A. volts B. ampere-hours C. farads D. amps

Last Answer : Answer: B

Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance, and capacitance. The capacitance of individual capacitors is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: D

Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

.Kamya purchased an item for Rs 46,000 and sold it at a loss of 12 per cent. With that amount she purchased another item which he sold at a gain of 12%. What was her overall gain/loss? 1. Loss of Rs 662.40 2. Profit of Rs 662.40 3. Loss of Rs 642.80 4. Profit of Rs 642.80

Description : .Kamya purchased an item for Rs 46,000 and sold it at a loss of 12 per cent. With that amount she purchased another item which he sold at a gain of 12%. What was her overall gain/loss? 1. Loss of Rs 662.40 2. Profit of Rs 662.40 3. Loss of Rs 642.80 4. Profit of Rs 642.80

Last Answer : 2. Profit of Rs 662.40

A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Description : A circuit has a resistance of 200 ohms. The resistance of the circuit can be reduced to 120 ohms by adding which of the following to the circuit. w) 80 ohm resistor in series x) 150 ohm resistor in parallel y) 240 ohm resistor in series z) 300 ohm resistor in parallel

Last Answer : ANSWER: Z -- 300 OHM RESISTOR IN PARALLEL

What important physical feature is found near 10 and deg North latitude and 80 and deg west longitude In which country is it located?

Description : What important physical feature is found near 10 and deg North latitude and 80 and deg west longitude In which country is it located?

Last Answer : What is the answer ?

The expenditure of company L in 2005 is Rs 40 crores. Find the income of company L in the same year ? 1) Rs. 50 Crore 2) Rs. 48 crore 3) Rs. 46 crore 4) Can’t be determined 5) None of these

Description : The expenditure of company L in 2005 is Rs 40 crores. Find the income of company L in the same year ? 1) Rs. 50 Crore 2) Rs. 48 crore 3) Rs. 46 crore 4) Can’t be determined 5) None of these

Last Answer : 2) Rs. 48 crore

The average age of K and L is 48 years. If M replaced K, the average age would be 40 and if M replaced L, the average would be 44. What are the ages of K,L,M repectively? A) 58, 46, 22 B) 32, 44, 36 C) 52,44,36 D) 56, 22,38

Description :  The average age of K and L is 48 years. If M replaced K, the average age would be 40 and if M replaced L, the average would be 44. What are the ages of K,L,M repectively? A) 58, 46, 22 B) 32, 44, 36 C) 52,44,36 D) 56, 22,38

Last Answer : Answer: C)  Total age of K& L = 48*2 = 96 yrs----->1 Total age of L& M = 40*2 = 80yrs----->2 Total age of K& M = 44*2 = 88 yrs----->3 from 1, 2, 3 K+L+M =132---->4 from 1 & 4, M= 36 from 2 & 4, K=52 from 3 & 4, L=44 Hence the required answer is 52,44,36 

The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Description : The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Last Answer : (E) 30

The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Description : The percentage of Nitrogen (N) in DAP is...... (A) 46 (B) 26 (C) 18 (D) 80 (E) 30

Last Answer : (C) 18

Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the internal resistance of battery A is 1.9

Description : Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the internal resistance of battery A is 1.9

Last Answer : Two batteries A and B each of e.m.f. 2 V are connected in series to an external resistance R = 1 ohm . If the ... V B. `3.8` V C. zero D. `4.8` V

A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A

Description : A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be:

Last Answer : A 35 V dc supply is connected across a resistance of 600 ohm in series with an unknown resistance R. A voltmeter having a resistance of 1.2 kOhm is connected across 600 ohm resistances and reads 5 V. The value of resistance R shall be: 2.4 kOhm

The voltage at the two ends of a transmission line are 132 KV and its reactance is 40 ohm. The Capacity of the line is (A) 435.6 MW (B) 217.8 MW (C) 251.5 MW (D) 500 MW

Description : The voltage at the two ends of a transmission line are 132 KV and its reactance is 40 ohm. The Capacity of the line is (A) 435.6 MW (B) 217.8 MW (C) 251.5 MW (D) 500 MW

Last Answer : (A) 435.6 MW

Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg(w) ≥ n for every v and w not connected by an edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Description : Consider a Hamiltonian Graph (G) with no loops and parallel edges. Which of the following is true with respect to this Graph (G) ? (a) deg(v) ≥ n/2 for each vertex of G (b) |E(G)| ≥ 1/2 (n-1)(n-2)+2 edges (c) deg(v) + deg( ... edge (A) (a) and (b) (B) (b) and (c) (C) (a) and (c) (D) (a), (b) and (c)

Last Answer : (D) (a), (b) and (c)

What continent is. 40 and deg North and 20 and deg East?

Description : What continent is. 40 and deg North and 20 and deg East?

Last Answer : Asia

Evaluate: `int_0^(pi//2)1/((a^2cos^2x+b^2sin^2x)^2)dx`

Description : Evaluate: `int_0^(pi//2)1/((a^2cos^2x+b^2sin^2x)^2)dx`

Last Answer : Evaluate: `int_0^(pi//2)1/((a^2cos^2x+b^2sin^2x)^2)dx` A. `(pi(a^(2) +b^(2)))/(4a^(3)b^(3))` B. ` ... )+b^(2)))/(4a^(2)b^(2))` C. None of the above D.

The equation `2sin^3theta+(2lambda-3)sin^2theta-(3lambda+2)sintheta-2lambda=0` has exactly three roots in `(0,2pi)` , then `lambda` can be equal to 0

Description : The equation `2sin^3theta+(2lambda-3)sin^2theta-(3lambda+2)sintheta-2lambda=0` has exactly three roots in `(0,2pi)` , then `lambda` can be equal to 0

Last Answer : The equation `2sin^3theta+(2lambda-3)sin^2theta-(3lambda+2)sintheta-2lambda=0` has exactly three roots in `(0,2pi)` , ... -1 B. 0 C. `(1)/(2)` D. 1

Find the electric field when the magnetic field is given by 2sin t in air. a) 8π x 10 -7 cos t b) 4π x 10 -7 sin t c) -8π x 10 -7 cos t d) -4π x 10 -7 sin t

Description : Find the electric field when the magnetic field is given by 2sin t in air. a) 8π x 10 -7 cos t b) 4π x 10 -7 sin t c) -8π x 10 -7 cos t d) -4π x 10 -7 sin t

Last Answer : a) 8π x 10 -7 cos t

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Description : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of which the rod forms a part is r,

Last Answer : A metal rod of length l cuts across a uniform magnetic field B with a velocity v. If the resistance of the circuit of ... lv)/(r)` D. `(Blv^(2))/(r)`

In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage

Description : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C?

Last Answer : In an ac series RLC circuit, the voltage across R and L is 20 V; voltage across L and C is 9 V and voltage across RLC is 15 V. What is the voltage across C? 7 V

What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively?

Description : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

Last Answer : What is the RMS voltage in a series RL circuit, if the voltage across R and L is 256 V and 192 V respectively? A) 320 V B) 448 V C) 64 V D) None of these

A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series ...

Description : A series R-L circuit is suddenly connected to d.c. voltage source of V volts. The current in this series circuit, just after the switch is closed, is equal to (1) Zero (2) V/L (3) V/C (4) V.L/C 

Last Answer : When is a series RLC circuit is over damped

When used for taking resistance measurements, a volt-ohm-milliammeter is normally powered by _____________. A. a hand cranked generator B. internal storage batteries C. the current in the circuit being tested D. a step down transformer

Description : When used for taking resistance measurements, a volt-ohm-milliammeter is normally powered by _____________. A. a hand cranked generator B. internal storage batteries C. the current in the circuit being tested D. a step down transformer

Last Answer : Answer: B

In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustrated circuit 'A', what power is consumed by a 3 ohm resistor with a 12 volt source? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Description : In the illustration what is the minimum wattage needed for a 3 ohm resistor with a 12 VDC power source in circuit 'A'? EL-0041 A. 12 watts B. 48 watts C. 64 watts D. 232 watts

Last Answer : Answer: B

Find the standing wave ratio, when a load impedance of 250 ohm is connected to a 75 ohm line. a) 0.3 b) 75 c) 250 d) 3.33

Description : Find the standing wave ratio, when a load impedance of 250 ohm is connected to a 75 ohm line. a) 0.3 b) 75 c) 250 d) 3.33

Last Answer : d) 3.33

In ceiling fan the angle between auxiliary winding a main winding is a) 0 deg b) 90 deg c) 180 deg d) 360 deg

Description : In ceiling fan the angle between auxiliary winding a main winding is a) 0 deg b) 90 deg c) 180 deg d) 360 deg

Last Answer : Ans: 90 deg

A CRO screen has ten divisions on the horizontal scale. If a voltage signal 5 sin 314t+45 deg)is examined with a line base settings of 5 msec/div, the number of cycles of signal displayed on the screen will be a) 0.5 cycles b) 2.5 cycles c) 5 cycles d) 10 cycles

Description : A CRO screen has ten divisions on the horizontal scale. If a voltage signal 5 sin 314t+45 deg)is examined with a line base settings of 5 msec/div, the number of cycles of signal displayed on the screen will be a) 0.5 cycles b) 2.5 cycles c) 5 cycles d) 10 cycles

Last Answer : Ans: 2.5 cycles

Mr. Shrimant inherits 4325 gold coins and divides them among his three sons; Bharat, Parat and Marat; in a certain ratio. Out of the total coins received by each of them, Bharat sells 40 coins; Parat donates his 20 coins and Marat loses 30 coins. Now, the ratio of gold coins with them is 41:34:46, respectively. How many coins did Parat receive from his father? a) 1210 b) 1211 c) 1212 d) 1213 e) None of these

Description : Mr. Shrimant inherits 4325 gold coins and divides them among his three sons; Bharat, Parat and Marat; in a certain ratio. Out of the total coins received by each of them, Bharat sells 40 coins; Parat donates his ... did Parat receive from his father? a) 1210 b) 1211 c) 1212 d) 1213 e) None of these 

Last Answer : Answer: A 41x+40+34x+20+46x+30=4325 =>121x=4325-90 =>x=35 Required answer, number of coins received by parat =34x+20=34×35+20=1210

The lines having R, L, C distributed along the circuit are called a) Lumped b) Distributed c) Parallel d) Paired

Description : The lines having R, L, C distributed along the circuit are called a) Lumped b) Distributed c) Parallel d) Paired

Last Answer : Ans: B

In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Description : In the illustration, the large battery and R(L) are in the circuit to ________. EL-0022 A. forward bias the emitter-base B. reverse bias the emitter-base C. forward bias the emitter/collector D. reverse bias the emitter/collector

Last Answer : Answer: D

The unit to measure the flow of water is - (1) Micro Mho (2) Ohm meter (3) Milli curie (4) Cusecs

Description : The unit to measure the flow of water is - (1) Micro Mho (2) Ohm meter (3) Milli curie (4) Cusecs

Last Answer : (4) Cusecs Explanation: The unit to measure the flow of water is cusecs. Cusecs is short form of Cubic feet per second.