What equipment should you use to de-magnetize a magnetic tape transport?

What equipment should you use to de-magnetize a  magnetic tape transport?
by

1 Answer

Answer :

A hand-held degausser.
by

Related questions

Sometimes it's necessary, but why should you avoid using cotton swabs when cleaning a magnetic tape transport?

Description : Sometimes it's necessary, but why should you avoid using cotton swabs when cleaning a magnetic tape transport?

Last Answer : Cotton swabs are not lint free.

What are the four basic parts of a magnetic tape recorder's tape transport system?

Description : What are the four basic parts of a magnetic tape recorder's tape transport system?

Last Answer : a. Tape reeling system. b. Tape speed control system. c. Electronic subsystem. d. Basic enclosure.

After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Description : After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

Last Answer : Oxide shedding. At temperatures above 130º F, oxide coating becomes soft and sheds.

In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded for 10 minutes to remove static charges. B. The transformer connections must be made as before with regard to the indicated polarity. C. The iron core of the transformer must be flashed to pre-magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Description : In replacing a defective transformer with a new one, which of the following actions must be carried out to insure proper operation of the equipment it serves? A. The secondary leads must be grounded ... magnetize it. D. The iron core must be grounded for 10 minutes to remove any residual magnetism.

Last Answer : Answer: B

Which of these materials requires the least value of magnetic field strength to magnetize it?

Description : Which of these materials requires the least value of magnetic field strength to magnetize it?  a. Nickel b. Silver c. Tungsten d. Sodium chloride 

Last Answer : Which of these materials requires the least value of magnetic field strength to magnetize it?  a. Nickel b. Silver c. Tungsten d. Sodium chloride 

When cleaning the parts of a tape transport, why should you switch lint-free cloths and swabs often?

Description : When cleaning the parts of a tape transport, why should you switch lint-free cloths and swabs often?

Last Answer : You may transfer dirt or oxide particles from one part of the tape transport to another

There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Description : There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Last Answer : a. Only operates in one direction. b. The tape tension and head-to-tape contact can vary.

How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Description : How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Last Answer : The tape drifts past the multi-track head at an angle.

You plan to measure your tape recorder’s SNR. What test equipment will you need?

Description : You plan to measure your tape recorder’s SNR. What test equipment will you need?

Last Answer : A VTVM and a signal generator.

Punched cards, paper tape, and magnetic tape use what storage access method?

Description : Punched cards, paper tape, and magnetic tape use what storage access method?

Last Answer : Sequential-access.

. How do tape transports with differential velocity capstans maintain a constant tape tension in the area around the magnetic heads?

Description : . How do tape transports with differential velocity capstans maintain a constant tape tension in the area around the magnetic heads?

Last Answer : The supply capstan is slightly larger than the take-up capstan. This causes the take-up capstan to pull the tape slightly faster than the supply capstan feeds the tape.

Why is it important to minimize TBE jitter in magnetic tape recordings where precise timing relationships exist between two or more signals?

Description : Why is it important to minimize TBE jitter in magnetic tape recordings where precise timing relationships exist between two or more signals?

Last Answer : The jitter could cause noise and a loss of accuracy.

What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Description : What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Last Answer : Third-order harmonic.

List four factors that can degrade the frequency response of magnetic tape recorders.

Description : List four factors that can degrade the frequency response of magnetic tape recorders.

Last Answer : a. A too-high or too-low bias signal level setting for the record head. b. An improper reproduce head gap. c. An improper tape transport speed. d. Poor tape-to-head contact.

What two types of record and reproduce electronics are used by magnetic tape recorders?

Description : What two types of record and reproduce electronics are used by magnetic tape recorders?

Last Answer : . a. Direct record (AM). b. Frequency modulation (FM).

What two preventive maintenance actions must you do regularly to increase magnetic head life and to ensure good tape recording and playback?

Description : What two preventive maintenance actions must you do regularly to increase magnetic head life and to ensure good tape recording and playback?

Last Answer : a. Keep the heads clean. b. Keep the heads demagnetized.

Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Description : Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Last Answer : Record, reproduce, and erase.

What is the correct way to hold a magnetic tape reel?

Description : What is the correct way to hold a magnetic tape reel?

Last Answer : Always hold reel by the hub, never by the flanges. Never touch the working tape surface.

What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Description : What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Last Answer : Using a magnetic tape degausser

What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Description : What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Last Answer : Using an erase head is slow, and it may not completely erase the tape.

You notice steps in the tape pack such as those in figure 2-3. What causes this and how does it damage the magnetic tape?

Description : You notice steps in the tape pack such as those in figure 2-3. What causes this and how does it damage the magnetic tape?

Last Answer : Pack slip. It's caused by loosely wound tape on a reel that is exposed to excessive vibration or heat. The vibration or heat causes the tape to shift, causing steps in the tape pack. The uneven tape will then rub against the reel's sides and the recorder's tape guides.

When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Description : When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Last Answer : Dirt build-up caused by static electricity.

Your activity stores its magnetic tape in an area where the temperature is 100º F. What two types of environmental damage could occur that would make these tapes unusable?

Description : Your activity stores its magnetic tape in an area where the temperature is 100º F. What two types of environmental damage could occur that would make these tapes unusable?

Last Answer : Head-to-tape sticking and layer-to-layer adhesion

Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Description : Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Last Answer : Ideally, use and store tape at 60 to 80º F and at 40 to 60% relative humidity.

List four rules you should follow when storing magnetic tape to protect it from damage.

Description : List four rules you should follow when storing magnetic tape to protect it from damage.

Last Answer : a. Make sure the tape is wound properly on the reel hub, b. store tapes vertically, c. keep storage area at right temperature and humidity, d. store away from equipment that generates stray magnetic fields.

If magnetic tape is stored in areas with temperature and humidity extremes, what are three types of tape damage that may occur?

Description : If magnetic tape is stored in areas with temperature and humidity extremes, what are three types of tape damage that may occur?

Last Answer : Oxide shedding, layer-to-layer sticking, and tape deformation.

What are four types of tape errors that can degrade a magnetic recording system’s performance?

Description : What are four types of tape errors that can degrade a magnetic recording system’s performance?

Last Answer : Signal dropout, noise, skew, and level. Dropout is the most common.

What type of magnetic tape is used to record computer programs and data, and what are the additional thickness and quality standards for this type of tape?

Description : What type of magnetic tape is used to record computer programs and data, and what are the additional thickness and quality standards for this type of tape?

Last Answer : digital magnetic tape is for computer programs and data. Its base material is about 50% thicker. The tape’s surface must not have blemishes or coating flaws because losing even one digital data bit could ruin the recorded computer program or data.

Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Description : Which of the two types of magnetic tape is used to record audio and instrumentation type signals in the VLF to 2.5MHz frequency range?

Last Answer : Analog magnetic tape.

Why is plastic magnetic tape used more than metal tape?

Description : Why is plastic magnetic tape used more than metal tape?

Last Answer : Plastic tape is used more than metal because it’s more flexible, resists mildew and fungus, and is very stable at high temperatures and humidity.

Magnetic tape is made of what three basic materials?

Description : Magnetic tape is made of what three basic materials?

Last Answer : a. Base material. b. Coating of magnetic oxide particles. c. Glue that bonds the particles to the base.

What are the major differences between magnetic tape units?

Description : What are the major differences between magnetic tape units?

Last Answer : The speed at which the tape is moved past the read/write head and the density of the recorded information.

What are the major differences between magnetic tape units?

Description : What are the major differences between magnetic tape units?

Last Answer : The speed at which the tape is moved past the read/write head and the density of the recorded information.

What is the purpose of any magnetic tape unit?

Description : What is the purpose of any magnetic tape unit?

Last Answer : To write data on or read data from a magnetic tape.

Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Description : Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Last Answer : a. Computer-compatible digital tape recorders. b. Telemetry digital tape recorders. c. Instrumentation digital tape recorders

Which digital data tape encoding method presets the magnetic tape to all zeros and then records digital ones onto the tape?

Description : Which digital data tape encoding method presets the magnetic tape to all zeros and then records digital ones onto the tape?

Last Answer : Return-to-bias (RB) encoding.

Which of the eight methods for encoding digital data onto magnetic tape is most widely used because it’s accurate, simple, and reliable?

Description : Which of the eight methods for encoding digital data onto magnetic tape is most widely used because it’s accurate, simple, and reliable?

Last Answer : Non-return-to-zero (NRZ) encoding.

What three formats are used for digital magnetic tape recording?

Description : What three formats are used for digital magnetic tape recording?

Last Answer : 1) Serial, (2) parallel, and (3) serial-parallel.

In digital magnetic tape recording, the series of recorded digital pulses can represent what three types of data?

Description : In digital magnetic tape recording, the series of recorded digital pulses can represent what three types of data?

Last Answer : a. Data used by digital computers. b. Pulsed squarewave signals. c. Digitized analog waveforms.

How do you magnetize something made of ironcobalt or nickle?

Description : How do you magnetize something made of ironcobalt or nickle?

Last Answer : Feel Free to Answer

The energy required to magnetize and demagnetize is called a) Saturation b) Retentivity c) Coercivity d) Hysteresis lossThe energy required to magnetize and demagnetize is called a) Saturation b) Retentivity c) Coercivity d) Hysteresis loss

Description : The energy required to magnetize and demagnetize is called a) Saturation b) Retentivity c) Coercivity d) Hysteresis loss

Last Answer : d) Hysteresis loss

How to Magnetize Metal

Description : How to Magnetize Metal

Last Answer : How to Magnetize Metal We're usually familiar with magnets in the form of clunky metal already magnetized. Not a lot of people know that you can actually make more magnets from existing magnets. ... magnetize other metallic objects. As long as the battery life holds, the nail will remain magnetized.

What type of equipment should you use to demagnetize your recorder's magnetic heads?

Description : What type of equipment should you use to demagnetize your recorder's magnetic heads?

Last Answer : A hand-held degausser like the manual degaussers used for degaussing magnetic tape.

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in fig. These pieces are arranged in a way that AB||HC || GD || FE. Also BC=CD=DE, and GF=6 cm. He wants to decorate the card by putting up a colored tape on the non-parallel sides of the trapezium.. -Maths 9th

Description : Sohan wants to show gratitude towards his teacher by giving her a card made by him. He has three pieces of trapezium pasted one above the other as shown in fig. These pieces are arranged in a way that ... the card by putting up a colored tape on the non-parallel sides of the trapezium.. -Maths 9th

Last Answer : Let us consider the following lay out of the greeting card. Trapeziums are arranged in such a way that AB || HC || GD || FE. Also BC=CD=DE and GF=6 cm and DE = 4cm. If three parallel lines make equal ... HG+GF+BC+CD+DE = 6+6+6+4+4+4=30 cm. (b) The values are: Happiness, beauty, Knowledge.

Who invented the video-tape? (1) Richard James (2) Charles Ginsberg (3) P.T. Farnsworth (4) Georges de Mestral

Description : Who invented the video-tape? (1) Richard James (2) Charles Ginsberg (3) P.T. Farnsworth (4) Georges de Mestral

Last Answer : Charles Ginsberg

What amount of flat tape or round cord is required to single lace a group of conductors?

Description : What amount of flat tape or round cord is required to single lace a group of conductors?

Last Answer : Two and one-half times the length of the longest conductor in the group.

Why is flat tape preferred instead of round cord when wire bundles are laced?

Description : Why is flat tape preferred instead of round cord when wire bundles are laced?

Last Answer : Round cord has a tendency to cut into the wire insulation.

Why is friction tape used in splicing?

Description : Why is friction tape used in splicing?

Last Answer : As a protective covering over the rubber tape.