After using a tape that was stored in an area where temperatures exceeded 130º F you notice pieces of oxide sticking to the recorder's tape-transport mechanism, to its magnetic heads, and onto the tape. What is the probable cause of these symptoms?

After using a tape that was stored in an area where  temperatures exceeded 130º F you notice pieces of oxide  sticking to the recorder's tape-transport mechanism, to its  magnetic heads, and onto the tape. What is the probable cause  of these symptoms?
by

1 Answer

Answer :

Oxide shedding. At temperatures above 130º F, oxide coating  becomes soft and sheds.
by

Related questions

Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Description : Magnetic tape recorders can have up to three different heads installed. What are the three functions performed by a recorder's heads?

Last Answer : Record, reproduce, and erase.

What are the four basic parts of a magnetic tape recorder's tape transport system?

Description : What are the four basic parts of a magnetic tape recorder's tape transport system?

Last Answer : a. Tape reeling system. b. Tape speed control system. c. Electronic subsystem. d. Basic enclosure.

How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Description : How do worn or sticking tape transport guides cause dynamic skew on a multi-track recorder?

Last Answer : The tape drifts past the multi-track head at an angle.

What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Description : What method for erasing magnetic tape is much more effective and reliable than using a recorder’s erase head?

Last Answer : Using a magnetic tape degausser

What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Description : What are two disadvantages of using a recorder’s erase head to erase data recorded on a magnetic tape?

Last Answer : Using an erase head is slow, and it may not completely erase the tape.

How often should you demagnetize a recorder's magnetic heads?

Description : How often should you demagnetize a recorder's magnetic heads?

Last Answer : Every 8 to 25 hours depending on the manufacturer's recommendations.

What type of equipment should you use to demagnetize your recorder's magnetic heads?

Description : What type of equipment should you use to demagnetize your recorder's magnetic heads?

Last Answer : A hand-held degausser like the manual degaussers used for degaussing magnetic tape.

How should you clean your recorder's magnetic heads?

Description : How should you clean your recorder's magnetic heads?

Last Answer : With a cotton-tipped applicator soaked in either isopropyl alcohol or a head cleaner recommended by the recorder's manufacturer.

. After rewinding a tape onto its supply reel, you examine the tape pack and notice pile-ups of tape resembling the example in figure 2-2. What causes this condition?

Description : . After rewinding a tape onto its supply reel, you examine the tape pack and notice pile-ups of tape resembling the example in figure 2-2. What causes this condition?

Last Answer : The tape is stopped too quickly when winding or rewinding.

What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Description : What number harmonic is the primary harmonic distortion in magnetic tape recorders?

Last Answer : Third-order harmonic.

List four factors that can degrade the frequency response of magnetic tape recorders.

Description : List four factors that can degrade the frequency response of magnetic tape recorders.

Last Answer : a. A too-high or too-low bias signal level setting for the record head. b. An improper reproduce head gap. c. An improper tape transport speed. d. Poor tape-to-head contact.

What two types of record and reproduce electronics are used by magnetic tape recorders?

Description : What two types of record and reproduce electronics are used by magnetic tape recorders?

Last Answer : . a. Direct record (AM). b. Frequency modulation (FM).

Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Description : Digital magnetic tape recorders used to store and retrieve digital data fall into what three categories?

Last Answer : a. Computer-compatible digital tape recorders. b. Telemetry digital tape recorders. c. Instrumentation digital tape recorders

. How do tape transports with differential velocity capstans maintain a constant tape tension in the area around the magnetic heads?

Description : . How do tape transports with differential velocity capstans maintain a constant tape tension in the area around the magnetic heads?

Last Answer : The supply capstan is slightly larger than the take-up capstan. This causes the take-up capstan to pull the tape slightly faster than the supply capstan feeds the tape.

The multi-track tape recorder in your computer system has a fixed skew error. What does this mean and what is the probable cause?

Description : The multi-track tape recorder in your computer system has a fixed skew error. What does this mean and what is the probable cause?

Last Answer : Skew means there are time differences between the individual tracks of a multi-track recorder’s magnetic head. It happens when the tape isn’t properly aligned with the head. Fixed skew happens when the tape passes over an improperly aligned magnetic head.

Why are record heads always placed before reproduce heads on recorders?

Description : Why are record heads always placed before reproduce heads on recorders?

Last Answer : Allow you to monitor the signals you're recording.

What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Description : What two specifications determine the maximum frequency that a recorder's record and reproduce heads will be able to transfer?

Last Answer : a. Size of the headgap. b. Speed of the magnetic tape.

Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Description : Environmental damage to magnetic tape can occur when the tape is stored in an area that exceeds what ideal temperature and humidity ranges?

Last Answer : Ideally, use and store tape at 60 to 80º F and at 40 to 60% relative humidity.

Which of the eight methods for encoding digital data onto magnetic tape is most widely used because it’s accurate, simple, and reliable?

Description : Which of the eight methods for encoding digital data onto magnetic tape is most widely used because it’s accurate, simple, and reliable?

Last Answer : Non-return-to-zero (NRZ) encoding.

Sometimes it's necessary, but why should you avoid using cotton swabs when cleaning a magnetic tape transport?

Description : Sometimes it's necessary, but why should you avoid using cotton swabs when cleaning a magnetic tape transport?

Last Answer : Cotton swabs are not lint free.

Which digital data tape encoding method presets the magnetic tape to all zeros and then records digital ones onto the tape?

Description : Which digital data tape encoding method presets the magnetic tape to all zeros and then records digital ones onto the tape?

Last Answer : Return-to-bias (RB) encoding.

You notice steps in the tape pack such as those in figure 2-3. What causes this and how does it damage the magnetic tape?

Description : You notice steps in the tape pack such as those in figure 2-3. What causes this and how does it damage the magnetic tape?

Last Answer : Pack slip. It's caused by loosely wound tape on a reel that is exposed to excessive vibration or heat. The vibration or heat causes the tape to shift, causing steps in the tape pack. The uneven tape will then rub against the reel's sides and the recorder's tape guides.

What type of reeling system best controls a tape recorder's tape tension during starts and stops?

Description : What type of reeling system best controls a tape recorder's tape tension during starts and stops?

Last Answer : A tape buffering reeling system

What causes flutter in a tape recorder’s output?

Description : What causes flutter in a tape recorder’s output?

Last Answer : Non-uniform tape motion caused by variations in tape speed.

Technical manuals for tape recorders can state the SNR in what three different ways?

Description : Technical manuals for tape recorders can state the SNR in what three different ways?

Last Answer : a. Root-mean-square (RMS) signal-to-RMS noise. b. Peak-to-peak signal-to-RMS noise. c. Peak signal-to-RMS noise.

You plan to measure your tape recorder’s SNR. What test equipment will you need?

Description : You plan to measure your tape recorder’s SNR. What test equipment will you need?

Last Answer : A VTVM and a signal generator.

Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Description : Two tape recorders have signal-to-noise ratios (SNRs) of 25-dB RMS and 35-dB RMS respectively. Which of the SNRs can record and reproduce the widest range of input signals and why?

Last Answer : 35-dB RMS because the highest SNR can always record and reproduce the widest range of input signals.

The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Description : The head driver circuit of a tape recorder’s FM record electronics (figure 5-4) performs what function?

Last Answer : It amplifies the frequency-modulated output from the record oscillator and sends it to the record head.

The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Description : The equalization and phase correction circuit in a tape recorder’s direct reproduce electronics (figure 5-2) performs what function?

Last Answer : It generates an equalization signal which corrects any frequency response problems in the input signal from the pre-amplifier circuit.

The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Description : The head driver circuit in a tape recorder’s direct record electronics component (figure 5-1) performs what function?

Last Answer : It takes the signal from the summing network, amplifies it, and sends it to the record head for recording.

Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Description : Which digital data encoding method helps overcome a tape recorder’s low-frequency response problems by recording two logic levels for each incoming data bit?

Last Answer : Bi-phase level encoding.

Your activity stores its magnetic tape in an area where the temperature is 100º F. What two types of environmental damage could occur that would make these tapes unusable?

Description : Your activity stores its magnetic tape in an area where the temperature is 100º F. What two types of environmental damage could occur that would make these tapes unusable?

Last Answer : Head-to-tape sticking and layer-to-layer adhesion

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

If magnetic tape is stored in areas with temperature and humidity extremes, what are three types of tape damage that may occur?

Description : If magnetic tape is stored in areas with temperature and humidity extremes, what are three types of tape damage that may occur?

Last Answer : Oxide shedding, layer-to-layer sticking, and tape deformation.

What equipment should you use to de-magnetize a magnetic tape transport?

Description : What equipment should you use to de-magnetize a magnetic tape transport?

Last Answer : A hand-held degausser.

What are four sources that can cause magnetic heads to become magnetized?

Description : What are four sources that can cause magnetic heads to become magnetized?

Last Answer : a. During ac power losses. b. During testing. c. Because of stray magnetic fields. d. From normal use.

When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Description : When the relative humidity is below 10%, what happens to magnetic tape and parts of a tape recorder that could cause environmental damage?

Last Answer : Dirt build-up caused by static electricity.

When winding a tape onto a plastic or metal reel, should the tape ever touch the reel’s flanges?

Description : When winding a tape onto a plastic or metal reel, should the tape ever touch the reel’s flanges?

Last Answer : No. The reel is designed to hold the tape on its hub without letting the tape touch the sides of the flanges.

What is the number of read-write heads in the drive for a 9- trac magnetic tape? A) 9 B) 16 C) 18 D) 27

Description : What is the number of read-write heads in the drive for a 9- trac magnetic tape? A) 9 B) 16 C) 18 D) 27

Last Answer : Answer : A

What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Description : What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Last Answer : 27

What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Description : What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Last Answer : a. 9

What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Description : What is the number of read-write heads in the drive for a 9-trac magnetic tape? a. 9 b. 16 c. 18 d. 27

Last Answer : a. 9

What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Description : What is the most probable cause of trouble in a synchro system that has all of its receivers reading incorrectly?

Last Answer : The transmitter or main bus.

The head arm assembly of a floppy disk drive transport has how many read heads and how many write heads?

Description : The head arm assembly of a floppy disk drive transport has how many read heads and how many write heads?

Last Answer : Two read heads and two write heads.

Which single phase ac motor will you select for record players and tape recorders?

Description :  Which single phase ac motor will you select for record players and tape recorders?  a) Hysteresis motor b) Shaded pole motor c) Reluctance motor d) Two value capacitor motor

Last Answer : Which single phase ac motor will you select for record players and tape recorders?  Hysteresis motor

The amount of data that can be stored on a linear inch of tape is known by what term?

Description : The amount of data that can be stored on a linear inch of tape is known by what term?

Last Answer : Recording density.

What are the three functions of the magnetic heads on a magnetic recording device?

Description : What are the three functions of the magnetic heads on a magnetic recording device?

Last Answer : a. Record the signal onto the recording medium. b. Reproduce the signal from the recording medium. c. Erase the signal from the recording medium.

What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Description : What six types of environmental damage can occur to tapes in storage when the ideal temperature and humidity ranges are exceeded?

Last Answer : Tape deformation, oxide shedding, head-to-tape sticking, layer to-layer sticking, dirt build-up, and excessive tape and head wear.

A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Description : A large negative voltage is applied to the plate of a diode, and a largewhat tube parameter has been exceeded?

Last Answer : Peak Inverse Voltage (PIV).