In addition to a primary coating, manufacturers add a layer of buffer material for what reasons?

In addition to a primary coating, manufacturers add a layer  of buffer material for what reasons?
by

1 Answer

Answer :

To provide additional mechanical protection and preserve the  fiber's inherent strength.
by

Related questions

List the three techniques used by manufacturers to buffer optical fibers.

Description : List the three techniques used by manufacturers to buffer optical fibers.

Last Answer : Tight-buffered, loose-tube, and gel-filled loose-tube.

Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Description : Give two reasons why optical fiber manufacturers depart from the traditional circular core and cladding, low-loss glass fiber design?

Last Answer : To increase performance and reduce cost

Why should the coating material be replaced once the required repair has been completed?

Description : Why should the coating material be replaced once the required repair has been completed?

Last Answer : To ensure protective characteristics are maintained

A solution which resists change in its pH value on addition of acid/alkali is called the __________ solution. (A) Neutral (B) Ideal (C) Buffer (D) Zero pH

Description : A solution which resists change in its pH value on addition of acid/alkali is called the __________ solution. (A) Neutral (B) Ideal (C) Buffer (D) Zero pH

Last Answer : Option C

In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine oil for the first four hours of operation C. baking the armature in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Description : In addition to undercutting the mica, proper maintenance of a D.C. motor's commutator includes _______________. A. side-cutting the copper segments and insulating the slots B. coating the copper surface with light machine ... in an oven at a maximum of 95°C for not over 8 hours D. all of the above

Last Answer : Answer: A

What is the purpose of the buffer amplifier?

Description : What is the purpose of the buffer amplifier?

Last Answer : Reduce interaction between oscillator and load.

Why do cable manufacturers introduce a controlled twist to the stacked ribbons during the cabling process?

Description : Why do cable manufacturers introduce a controlled twist to the stacked ribbons during the cabling process?

Last Answer : To minimize fiber stress when the cable is bent

What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Description : What are the two methods used by fiber manufacturers to fabricate multimode and single mode glass fibers?

Last Answer : Vapor phase oxidation and direct-melt process.

What was the purpose of several computer manufacturers cooperating to develop ASCII code for processing and transmitting data?

Description : What was the purpose of several computer manufacturers cooperating to develop ASCII code for processing and transmitting data?

Last Answer : To standardize a binary code to give the computer user the capability of using several machines to process data regardless of the manufacturer.

What do you mean by enteric coated tablet? Give reasons for enteric coating.

Description : What do you mean by enteric coated tablet? Give reasons for enteric coating.

Last Answer : Enteric Coated tablet:   1. These tablets are coated with the material which does not disintegrate in stomach but passes through as it is i.e. enteric polymer e.g.: Hydroxypropyl methyl cellulose phthalate ... stomach pH. 4. Drug absorption is better in intestine. 5. Delayed action is needed. 

Give any four reasons for film coating.

Description : Give any four reasons for film coating.

Last Answer : To mask the disagreeable odour, colour or taste of the drug/tablet. To offer a physical and/or chemical protection to the drug. To protect drug from the deterioration effect of external ... . Increasing the mechanical strength of the dosage form. To improve the appearance of tablets

Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Description : Coating provided on the electrodes used in the arc welding is not expected to (A) Add alloying elements (B) Prevent electrode from contamination (C) Stabilise the arc (D) Provide protective atmosphere to weld

Last Answer : (B) Prevent electrode from contamination

At Pr > 1, conduction in an ordinary fluid flowing through a heated pipe is limited to the (A) Buffer zone (B) Turbulent core (C) Both (A) and (B) (D) Viscous sub-layer

Description : At Pr > 1, conduction in an ordinary fluid flowing through a heated pipe is limited to the (A) Buffer zone (B) Turbulent core (C) Both (A) and (B) (D) Viscous sub-layer

Last Answer : (D) Viscous sub-layer

The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as – (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : (3) Galvanising Explanation: Galvanization is the process of applying a protective zinc coating to steel or iron, in order to prevent rusting. Although galvanization can be done with electrochemical and ... is hot-dip galvanization, in which steel parts are submerged in a bath of molten zinc.

The method of protecting iron from rusting, by coating a thin layer of Zinc is called - (1) Galvanizing (2) rancidity (3) Alloy (4) Pulverizing

Description : The method of protecting iron from rusting, by coating a thin layer of Zinc is called - (1) Galvanizing (2) rancidity (3) Alloy (4) Pulverizing

Last Answer : (1) Galvanizing Explanation: Galvanisation or galvanization (or galvanizing as it is most commonly called) is the process of applying a protective zinc coating to iron or steel, to prevent rusting.

The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Description : The coating of a thin layer of zinc on steel or iron objects is known as (1) Hot dipping (2) Tinning (3) Galvanising (4) Electroplating

Last Answer : Galvanising

Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the “. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : Primary

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Description : Actual data processing operations are performed in the arithmetic logic section, but not in the …. Storage section of a processor unit a. Primary b. Accumulator c. Buffer d. Secondary

Last Answer : a. Primary

Which of the following statement(s) is/are true concerning the cell function of phagocytosis? a. Phagocytosis is a mechanistically distinct process of endocytosis performed by special cells to take up larger particles such as bacteria or erythrocytes b. Lymphocytes are the primary blood cell involved with this process c. The process involves a coating of the cytoplasmic surface known as clathrin d. Phagocytosis is performed only by white blood cells and tissue macrophages

Description : Which of the following statement(s) is/are true concerning the cell function of phagocytosis? a. Phagocytosis is a mechanistically distinct process of endocytosis performed by special cells to take ... known as clathrin d. Phagocytosis is performed only by white blood cells and tissue macrophages

Last Answer : Answer: a Phagocytosis is a specialized form of endocytosis by which large particles are internalized by specialized cells primarily macrophages and neutrophils. To be phagocytosed, particles ... the lumen of the thyroid follicle, thereby releasing the thyroid hormones, thyroxine triiodothyronine

Which of the following terms refers to a material which slows neutrons? w) retarder x) moderator y) buffer z) bottleneck

Description : Which of the following terms refers to a material which slows neutrons? w) retarder x) moderator y) buffer z) bottleneck

Last Answer : ANSWER: X -- MODERATOR

Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Description : Electrical insulation is classed by the _____________. A. International Association of Electrical Manufacturers B. approximate operating voltage and current expected C. U.S. Coast Guard D. temperature stability of the manufacturing material(s)

Last Answer : Answer: D

One difference between manufacturers' agents and selling agents is that A)selling agents have little control over the marketing mix of the manufacturers they represent. B)selling agents represent retailers. C)manufacturers' agents are not able to offer retailers aid in advertising or other promotional material. D)selling agents seldom have the territorial restrictions that manufacturers' agents do. E)selling agents represent wholesalers.

Description : One difference between manufacturers' agents and selling agents is that A)selling agents have little control over the marketing mix of the manufacturers they represent. B)selling agents ... have the territorial restrictions that manufacturers' agents do. E)selling agents represent wholesalers.

Last Answer : E)selling agents represent wholesalers.

Coating of solid waste with impervious material is known as – (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Description : Coating of solid waste with impervious material is known as – (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Last Answer : (1) Encapsulation Explanation: Containment of toxic or hazardous constituents in industrial solid wastes is currently being accomplished using: (i) coating grains of waste material with an ... coating blocks of waste material with an inert, non-reactive impervious material (macroencapsulation).

Polyurethane cannot be used for making (A) Mattresses & foam (B) Coating material (C) Adhesives (D) Bottles

Description : Polyurethane cannot be used for making (A) Mattresses & foam (B) Coating material (C) Adhesives (D) Bottles

Last Answer : (D) Bottles

The caking of crystals can be prevented by (A) Maintaining high critical humidity (B) Maintaining low critical humidity (C) Coating the product with inert material (D) Both (A) and (C)

Description : The caking of crystals can be prevented by (A) Maintaining high critical humidity (B) Maintaining low critical humidity (C) Coating the product with inert material (D) Both (A) and (C)

Last Answer : (D) Both (A) and (C)

Ceramic coating material for furnace refractory, which increases itsemissivity and thus the radiation heat transfer rate in the furnace, comprises of (A) Graphite powder (B) Thoria (C) Zircon powder (D) Beryllium

Description : Ceramic coating material for furnace refractory, which increases itsemissivity and thus the radiation heat transfer rate in the furnace, comprises of (A) Graphite powder (B) Thoria (C) Zircon powder (D) Beryllium

Last Answer : (C) Zircon powder

Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Description : Aryl benzene sulphonate (ABS) is a (A) Detergent (B) Plasticiser for unsaturated polyester (C) Starting material for the synthesis of glycerine (D) Coating ingredient for photographic film

Last Answer : (A) Detergent

Coating of solid waste with impervious material is known as (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Description : Coating of solid waste with impervious material is known as (1) Encapsulation (2) Chemical fixation (3) Landfill (4) Capping

Last Answer : Encapsulation

In a TDR system connected for addition in what direction will the TDR rotor field turn when the TX rotor to which it is connected turns counterclockwise?

Description : In a TDR system connected for addition in what direction will the TDR rotor field turn when the TX rotor to which it is connected turns counterclockwise?

Last Answer : Clockwise.

What connections in a TDR system are reversed to set up the system for addition?

Description : What connections in a TDR system are reversed to set up the system for addition?

Last Answer : . The R1 and R3 leads between the TDR rotor and the TX to which it is connected.

What connections in a TDX system are reversed to set up the system for addition?

Description : What connections in a TDX system are reversed to set up the system for addition?

Last Answer : The number and type of synchro receivers, the mechanical loads on these receivers and the operating temperatures of both the transmitter and receivers.

In addition to stepping up or stepping down the input line voltage, what additional purpose does the transformer serve?

Description : In addition to stepping up or stepping down the input line voltage, what additional purpose does the transformer serve?

Last Answer : . It isolates the chassis from the power line.

What type of instructions permit addition, subtraction, multiplication, and division?

Description : What type of instructions permit addition, subtraction, multiplication, and division?

Last Answer : Arithmetic.

In addition to a flat top, what characteristics must a modulator pulse have?

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

In addition to a flat top, what characteristics must a modulator pulse have?

Description : In addition to a flat top, what characteristics must a modulator pulse have?

Last Answer : Steep leading and trailing edges.

In addition to recovery time, what determines the minimum range of a radar set?

Description : In addition to recovery time, what determines the minimum range of a radar set?

Last Answer : Pulse width

How does the addition of a screen grid in a tetrode reduce interelectrode capacitance?

Description : How does the addition of a screen grid in a tetrode reduce interelectrode capacitance?

Last Answer : The interelectrode capacitance (cpg) is divided between two series capacitances; thus, cpg is greatly reduced.

Will the addition of a yellow filter on a TV really add that much to the color quality of the picture?

Description : Will the addition of a yellow filter on a TV really add that much to the color quality of the picture?

Last Answer : The tech reviews that I have read have been glowing (no pun intended). One reviewer wrote that he attended a show specifically to review the new 3D television offerings, but was so enamored of the Aquos 4 color technology, he revised his plans (sorry, I can’t find the article that I read).

is this statement true or falseThe Addition Property of Equality states that an equation remains true if you add the same number to both sides of the equation.?

Description : is this statement true or falseThe Addition Property of Equality states that an equation remains true if you add the same number to both sides of the equation.?

Last Answer : 1

Using only addition, how do you add eight 8s and get the number 1,000?

Description : Using only addition, how do you add eight 8s and get the number 1,000?

Last Answer : A: 888 + 88 + 8 + 8 + 8 = 1000.

In LISP, the addition 3 + 2 is entered as _______________ a) 3 + 2 b) 3 add 2

Description : In LISP, the addition 3 + 2 is entered as _______________ a) 3 + 2 b) 3 add 2

Last Answer : b) 3 add 2

Develop a program to swap two numbers using pointer and add swaped numbers also print their addition.

Description : Develop a program to swap two numbers using pointer and add swaped numbers also print their addition.

Last Answer : #include<stdio.h> void swap(int *a,int *b) {  int temp;  temp=*a;  *a=*b;  *b=temp; } void main() { int x,y,sum; printf("\n Enter value for x:"); scanf(" ... x); printf("\ny=%d",y); sum=x+y; printf("Sum of x+y = %d",sum); }

Write a program in C++ to declare a class measure having data members as add 1, add 2, add 3. Initialize the values of two data members using constructor and display their addition using function.

Description : Write a program in C++ to declare a class measure having data members as add 1, add 2, add 3. Initialize the values of two data members using constructor and display their addition using function.

Last Answer : #include<iostream.h> #include<conio.h> class measure { public: int add1,add2,add3; measure(int a,int b) { add1=a; add2=b; } void cal() { add3=add1+add2; } void display() ... ;>a>>b; measure m1(a, b); m1.cal(); m1.display(); getch(); }

Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Description : Which of the following layers is an addition to OSI model when compared with TCP IP model? a. Application layer b. Presentation layer c. Session layer d. Session and Presentation layer

Last Answer : d. Session and Presentation layer

What is one of the major reasons for the fading of radio waves which have been reflected from a surface?

Description : What is one of the major reasons for the fading of radio waves which have been reflected from a surface?

Last Answer : Shifting in the phase relationships of the wave.

List two reasons why fusion splicing is one of the most popular splicing techniques in commercial applications.

Description : List two reasons why fusion splicing is one of the most popular splicing techniques in commercial applications.

Last Answer : . The small size of the fusion splice and the development of automated fusion-splicing machines.

The Navy recommends using the rotary splice for what two reasons?

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

Give two reasons why the value of the normalized frequency (V) is varied in single mode stepindex fibers?

Description : Give two reasons why the value of the normalized frequency (V) is varied in single mode stepindex fibers?

Last Answer : To increase performance and reduce losses caused by bending and splicing.