How does the source drive circuit intensity modulate the source?

How does the source drive circuit intensity modulate the  source?
by

1 Answer

Answer :

By varying the current through the source.
by

Related questions

How are we able to modulate the temperature we exhale?

Description : How are we able to modulate the temperature we exhale?

Last Answer : answer:I think you're spot on target with your theory @uberbatman. I once knew a clown who could do the same thing with his asshole. It was even more pronounced than from mouth, because he could ... even the cling time, depending upon the wind of course. Dude really knew how to clear a room.

New treatment modalities designed to modulate host defense mechanisms that have been demonstrated conclusively to be of benefit include: a. Gut decontamination b. Anti-LPS antibody c. Anti-TNF antibody d. Thymopentin e. None of the above

Description : New treatment modalities designed to modulate host defense mechanisms that have been demonstrated conclusively to be of benefit include: a. Gut decontamination b. Anti-LPS antibody c. Anti-TNF antibody d. Thymopentin e. None of the above

Last Answer : Answer: e Selective gut decontamination involves the use of orally administered antibiotics that achieve a high intraluminal level directed against gram-negative aerobes and yeast, leaving ... but conclusive evidence that concurrent reduction of infection-related mortality occurs is not available

Which type of laser is the simplest to modulate directly by changing its excitation? a. Semiconductor b. Ruby c. Helium-neon d. Neodymium-YAG

Description : Which type of laser is the simplest to modulate directly by changing its excitation? a. Semiconductor b. Ruby c. Helium-neon d. Neodymium-YAG

Last Answer : a. Semiconductor

Which type of laser is the simplest to modulate directly by changing its excitation? a. Semiconductor b. Ruby c. Helium-neon d. Neodymium-YAG

Description : Which type of laser is the simplest to modulate directly by changing its excitation? a. Semiconductor b. Ruby c. Helium-neon d. Neodymium-YAG

Last Answer : a. Semiconductor

Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Description : Three audio waves with 100,200 and 300 volts amplitude respectively, simultaneously modulate a 450 volts carrier. What is the total percent of modulation of the AM wave? A. 69 % B. 115.5 % C. 50% D. 83%

Last Answer : D. 83%

A term related to sending data to a satellite is _____: a) down link b) modulate c) demodulate d) up link e) interrelate

Description : A term related to sending data to a satellite is _____: a) down link b) modulate c) demodulate d) up link e) interrelate

Last Answer : d) up link

Which type of laser is the simplest to modulate directly by changing its excitation? ∙ a. Semiconductor ∙ b. Ruby ∙ c. Helium-neon ∙ d. Neodymium-YAG

Description : Which type of laser is the simplest to modulate directly by changing its excitation? ∙ a. Semiconductor ∙ b. Ruby ∙ c. Helium-neon ∙ d. Neodymium-YAG

Last Answer : a. Semiconductor

Which type of laser is the simplest to modulate directly by changing its excitation? ∙ a. Semiconductor ∙ b. Ruby ∙ c. Helium-neon ∙ d. Neodymium-YAG

Description : Which type of laser is the simplest to modulate directly by changing its excitation? ∙ a. Semiconductor ∙ b. Ruby ∙ c. Helium-neon ∙ d. Neodymium-YAG

Last Answer : Semiconductor

Which type of optical source tends to operate at higher drive currents to produce light?

Description : Which type of optical source tends to operate at higher drive currents to produce light?

Last Answer : Laser.

What tool is used to de-energize capacitors in a circuit that has been disconnected from its power source?

Description : What tool is used to de-energize capacitors in a circuit that has been disconnected from its power source?

Last Answer : Shorting probe.

A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Description : A series circuit consists of two resistors in series. R1 = 25 ohms and R2 = 30 ohms. The circuit current is 6 amps. What is the (a) source voltage, (b) voltage dropped by each resistor, (c) total power, and (d) power used by each resistor?

Last Answer : (a) 330 volts. (b) E1 = 150 volts. E2 = 180 volts. (c) 1.98 kilowatts. (d) P1 = 900 watts. P2 = 1.08 kilowatts component but in a parallel circuit total current divides among the available paths.

A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Description : A circuit has a source voltage of 100 volts and two 50-ohm resistors connected in series. If the reference point for this circuit is placed between the two resistors, what would be the voltage at the reference point?

Last Answer : 50 volts.

A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Description : A series circuit consisting of three resistors has a current of 3 amps. If R1 = 20 ohms, R2= 60 ohms, and R 3 = 80 ohms, what is the (a) total resistance and (b) source voltage of the circuit?

Last Answer : (a) 160 ohms. (b) 480 ohms

what part of the circuit is the (a) load and (b) source?

Description : what part of the circuit is the (a) load and (b) source?

Last Answer : a) DS1, the flashlight bulb (b) BAT, the dry cell

What is intensity as it pertains to sound?

Description : What is intensity as it pertains to sound?

Last Answer : The amount of energy transmitted from a source.

Which quantity (voltage or current) determines the intensity of an electrical shock?

Description : Which quantity (voltage or current) determines the intensity of an electrical shock?

Last Answer : Current.

At a distance of 10 meters form a point source, the intensity level is measured to be 70 dB. At what distance form the source well the intensity be 40 dB? How do you solve this?

Description : At a distance of 10 meters form a point source, the intensity level is measured to be 70 dB. At what distance form the source well the intensity be 40 dB? How do you solve this?

Last Answer : Going on memory here….3db is half the intensity. The intensity is usually inversely proportional to r squared. The rest is math, so 70–40 is 30 or ten halves.

A frheshly prepared radioactive source of half life 2 hrs emits radiation of intensity which is 32 times the permissible safe value of intensity. Whic

Description : A frheshly prepared radioactive source of half life 2 hrs emits radiation of intensity which is 32 times the permissible safe value of intensity. Whic

Last Answer : A frheshly prepared radioactive source of half life 2 hrs emits radiation of intensity which is 32 times the ... B. 5hrs C. 10 hrs D. 32 hrs

A freshely prepared radioactive source of half 2 hours emits radiations of intensity which is 64 times the permissible safe level. The minimum time af

Description : A freshely prepared radioactive source of half 2 hours emits radiations of intensity which is 64 times the permissible safe level. The minimum time af

Last Answer : A freshely prepared radioactive source of half 2 hours emits radiations of intensity which is 64 times the ... 12 hours C. 24 hours D. 48 hours

Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, assuming normal incidence. If the area of the s

Description : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, assuming normal incidence. If the area of the s

Last Answer : Calculate the illuminance at a surface distance 0.5m from a ligth source of luminous intensity 200 cd, ... , what is the luminous flux on this area ?

At what distance form a light source of 64 cd, will the intensity of illumination because 4 flux ?

Description : At what distance form a light source of 64 cd, will the intensity of illumination because 4 flux ?

Last Answer : At what distance form a light source of 64 cd, will the intensity of illumination because 4 flux ?

Calculate the intensity of illumination at a distance of 0.5m from a source of light of power 200 candela assuming normal incidence.

Description : Calculate the intensity of illumination at a distance of 0.5m from a source of light of power 200 candela assuming normal incidence.

Last Answer : Calculate the intensity of illumination at a distance of 0.5m from a source of light of power 200 candela assuming normal incidence.

When we hear a sound, we can identify its source from ______. (1) wave length of sound (2) the overtones present in the sound (3) the intensity of sound (4) the amplitude of sound

Description : When we hear a sound, we can identify its source from ______. (1) wave length of sound (2) the overtones present in the sound (3) the intensity of sound (4) the amplitude of sound

Last Answer : (2) the overtones present in the sound Explanation: An overtone is any frequency higher than the fundamental frequency of a sound. Using the model of Fourier analysis, the fundamental and the overtones together are called partials.

What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Description : What is affected by the distance between the listener and the source of the sound because the intensity varies inversely with the square of the distance? A. Volume B. Pitch C. Loudness D. Frequency

Last Answer : C. Loudness

Which instrument is used to measure the intensity of light produced by an unknown source in terms of a standard source?

Description : Which instrument is used to measure the intensity of light produced by an unknown source in terms of a standard source?

Last Answer : Photometre

The sound which continues even after its source is cut off, is called (A) Reverberation (B) Echo (C) Intensity of sound (D) Interferenc

Description : The sound which continues even after its source is cut off, is called (A) Reverberation (B) Echo (C) Intensity of sound (D) Interferenc

Last Answer : Answer: Option A

It is the intensity of a radiating source.  a. Specific Brightness  b. Radiance  c. Surface Brightness  d. All of these

Description : It is the intensity of a radiating source.  a. Specific Brightness  b. Radiance  c. Surface Brightness  d. All of these

Last Answer : All of these

During the decoding process, the A)intensity of the transmission becomes stronger. B)receiver attempts to convert signs into concepts and ideas. C)source attempts to convert signs into concepts and ideas. D)receiver filters noise from the feedback.

Description : During the decoding process, the A)intensity of the transmission becomes stronger. B)receiver attempts to convert signs into concepts and ideas. C)source attempts to convert signs into concepts and ideas. D)receiver filters noise from the feedback.

Last Answer : B)receiver attempts to convert signs into concepts and ideas.

The energy associated with one photon of a light beam is proportional to one of the following. Is it proportional to: w) the intensity of the light source from which it came x) the number of photons in the beam y) the frequency of the photon z) the speed of the photon

Description : The energy associated with one photon of a light beam is proportional to one of the following. Is it proportional to: w) the intensity of the light source from which it came x) the number of photons in the beam y) the frequency of the photon z) the speed of the photon

Last Answer : ANSWER: Y -- THE FREQUENCY OF THE PHOTON

Top and side views of a photographer’s setup for a product shoot are shown in the figure. P is the primary light source, S is the secondary light source, R is the reflector and Q is the camera position. If the Primary Light Source is at 100% intensity, and the secondary light is at 25% intensity, which one of the given options is the photograph taken using this setup?

Description : Top and side views of a photographer's setup for a product shoot are shown in the figure. P is the primary light source, S is the secondary light source, R is the reflector and Q is the camera ... 25% intensity, which one of the given options is the photograph taken using this setup?

Last Answer : D

Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Description : Is the drive circuitry generally more complex for an LED or a laser diode? Why?

Last Answer : For a laser diode. The laser diode transmitter generally contains output power control circuitry and may contain a TE cooler and some circuitry associated with the TE cooler.

What are the three most common closed-loop capstan drive designs?

Description : What are the three most common closed-loop capstan drive designs?

Last Answer : a. Differential velocity capstans. b. Dual motors dual capstans. c. Peripheral drive capstans.

How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Description : How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Last Answer : Closed loop capstan drive transports use more than one capstan to clamp the tape in the area around the magnetic head.

There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Description : There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Last Answer : a. Only operates in one direction. b. The tape tension and head-to-tape contact can vary.

What type of hard disk drive interface has all of the controller card electronics included in the disk drive itself?

Description : What type of hard disk drive interface has all of the controller card electronics included in the disk drive itself?

Last Answer : Integrated drive electronics (IDE).

What type of disk drive interface has most of the electronics on a controller card mounted in the host computer?

Description : What type of disk drive interface has most of the electronics on a controller card mounted in the host computer?

Last Answer : ST-506/412 interface.

The control electronics component of a floppy or hard disk drive performs what three main functions?

Description : The control electronics component of a floppy or hard disk drive performs what three main functions?

Last Answer : a. Spins the disk at the correct speed. b. Moves the heads across the recording surface. c. Tells the write/read heads when to write data and when to read it.

Approximately how often should you clean a floppy disk drive that gets heavy use?

Description : Approximately how often should you clean a floppy disk drive that gets heavy use?

Last Answer : Once a month

In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Description : In the actuator arm assembly of a hard disk drive transport, what device can position the magnetic heads to the correct track of a hard disk more accurately than a dc stepper motor?

Last Answer : Voice coil servo.

Hard disk drive transports contain the electromechanical parts that perform what three functions?

Description : Hard disk drive transports contain the electromechanical parts that perform what three functions?

Last Answer : a. Rotates the hard disk platters. b. Writes data to and reads data from the disk platters

What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Description : What part of a floppy disk drive transport contains the circuitry which controls the electromechanical parts of the transport?

Last Answer : Drive electronics circuit board.

What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Description : What part of a floppy disk drive transport uses a dc stepper motor to position the magnetic heads over the recording surface of a floppy disk?

Last Answer : Actuator arm assembly.

The head arm assembly of a floppy disk drive transport has how many read heads and how many write heads?

Description : The head arm assembly of a floppy disk drive transport has how many read heads and how many write heads?

Last Answer : Two read heads and two write heads.

The drive motor of a 3-1/2", 1.44-MB floppy disk drive spins the disk at what RPM?

Description : The drive motor of a 3-1/2", 1.44-MB floppy disk drive spins the disk at what RPM?

Last Answer : 600 RPM.

What are the four most important parts of a floppy disk drive transport?

Description : What are the four most important parts of a floppy disk drive transport?

Last Answer : a. Drive motor/spindle assembly. b. Head arm assembly. c. Actuator arm assembly. d. Drive electronics circuit board.

What type of amplifier would be used to drive the speaker system of a record player?

Description : What type of amplifier would be used to drive the speaker system of a record player?

Last Answer : An audio power amplifier.

Why are shaded-pole motors used to drive only very small devices?

Description : Why are shaded-pole motors used to drive only very small devices?

Last Answer : They have very weak starting torques.

What is the maximum allowable source pressure that can be used with the compressor air/nitrogen heating tool?

Description : What is the maximum allowable source pressure that can be used with the compressor air/nitrogen heating tool?

Last Answer : 200 psig.

A sound wave that is reflected back toward the source is known as what type of sound?

Description : A sound wave that is reflected back toward the source is known as what type of sound?

Last Answer : Echo.

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.