What are the three most common closed-loop capstan drive designs?

What are the three most common closed-loop capstan  drive designs?
by

1 Answer

Answer :

a. Differential velocity capstans.  
 b. Dual motors dual capstans.  
 c. Peripheral drive capstans.
by

Related questions

How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Description : How do closed-loop capstan drive tape transports overcome the disadvantages of the open-loop drive design?

Last Answer : Closed loop capstan drive transports use more than one capstan to clamp the tape in the area around the magnetic head.

There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Description : There are two types of tape transport configurations, open loop capstan drive and closed-loop capstan drive. What are two major disadvantages of open-loop capstan drive tape transports?

Last Answer : a. Only operates in one direction. b. The tape tension and head-to-tape contact can vary.

How do dual-motor dual capstan drives maintain a constant tape tension while operating in either a forward or reverse direction?

Description : How do dual-motor dual capstan drives maintain a constant tape tension while operating in either a forward or reverse direction?

Last Answer : Each capstan is driven by its own motor. It maintains tape tension by slowing down one of the motors. When the tape motion is reversed, the opposite motor is slowed down.

select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Description : select the correct response from the choices given in the parentheses. Q-20. In a closed-loop configuration the output signal is determined by (the input signal, the feedback signal, both).

Last Answer : Both the input signal and the feedback signal.

What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Description : What does the term "closed-loop" mean in the closed-loop configuration of an operational amplifier?

Last Answer : The use of degenerative (negative) feed-back

What is the advantage of using a closed-servo loop to control load velocity?

Description : What is the advantage of using a closed-servo loop to control load velocity?

Last Answer : The closed-servo loop can regulate load speed under changing conditions.

What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Description : What basic requirement of a closed-loop system (not present in open-loops) enables present load position to be sensed?

Last Answer : Feedback.

List the three types of cable designs being considered by the Navy.

Description : List the three types of cable designs being considered by the Navy.

Last Answer : Optical fiber cable component (OFCC), stranded, and ribbon cables designs.

What are the different designs of local area networks called?

Description : What are the different designs of local area networks called?

Last Answer : Broadband and baseband.

How many designs of local area networks are there that can be used?

Description : How many designs of local area networks are there that can be used?

Last Answer : Two

Who designs and builds the storage capacity of an address into a computer?

Description : Who designs and builds the storage capacity of an address into a computer?

Last Answer : he manufacturer.

What is Capstan or Tarot Led ?

Description : What is Capstan or Tarot Led ?

Last Answer : Capstan or Tarot Led is just an improved version of Center Led. Capstan or torret lead is a type of lead that is made instead of engine stock for the purpose of rapid production.

What is the difference between the first officer and the capstan?

Description : What is the difference between the first officer and the capstan?

Last Answer : What is the answer ?

On tank vessels with an electrically-driven capstan, the motor should be meggered periodically to test _____________. A. insulation resistance B. eddy currents C. capacitance D. armature reactance

Description : On tank vessels with an electrically-driven capstan, the motor should be meggered periodically to test _____________. A. insulation resistance B. eddy currents C. capacitance D. armature reactance

Last Answer : Answer: A

Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Description : Theodolite is an instrument used for (a) Tightening the capstan-headed nuts of level tube (b) Measurement of horizontal angles only (c) Measurement of vertical angles only (d) Measurement of both horizontal and vertical angles*

Last Answer : (d) Measurement of both horizontal and vertical angles*

Would this not be a good example of a closed loop paradox?

Description : Would this not be a good example of a closed loop paradox?

Last Answer : No, it’s a disgusting example of a closed loop paradox.

With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Description : With reference to NC machines, which of the following statements is wrong a.Both closed-loop and open-loop control systems are used b.Paper tapes, floppy tapes and cassettes are used for data storage c.Digitizers may be used as interactive input devices d.Post processor is an item of hardware

Last Answer : c.Digitizers may be used as interactive input devices

In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Description : In which system we get feedback? a.Open-loop system b.Machine control system c.Closed-loop system d.None of the above

Last Answer : c.Closed-loop system

A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

Description : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y-axis. What is the magnitude of the t

Last Answer : A rectangular loop consists of N closed wrapped turns and has dimendions `a xx b`. The loop is hinged along the Y- ... . `(-2Ni_(0)abB_(0)hat(j))/(5)`

A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is

Description : A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is

Last Answer : A current l flows through a closed loop as shown in figure .The magnetic field at the centre O is A. ... )l)/(2piR)(theta+sintheta)` D. None of these

Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Description : Which of the following statements is correct for any closed loop system ? (a) All the co-efficients can have zero value (6) All the co-efficients are always non-zero (c) Only one of the static error co-efficients has a finite non-zero value (d) None of the above

Last Answer : Ans: C

On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Description : On which of the following factors does the sensitivity of a closed loop system to gain changes and load disturbances depend? a) Frequency b) Loop gain c) Forward gain d) All of the mentioned

Last Answer : Ans: D

Closed loop and Open loop Control System Advantages and Disadvantages

Description : Closed loop and Open loop Control System Advantages and Disadvantages

Last Answer : Open Loop Control System: Control System in which output quantity has no effect on the input quantity is called Open Loop Control System. Open Loop Control System has no facility to correct automatically the ... in the closed loop system and more care is needed to design a stable closed loop system

When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Description : When the work done in moving a particle round a closed loop in a field is zero, the forces in the field are called A. Zero forces B. Non-Conservative forces C. Conservative forces D. Viscous forces

Last Answer : Conservative forces

G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Description : G(s) = (1-s)/s(s+2) then closed loop transfer function is a) Unstable b) Stable c) Marginally stable d) All

Last Answer : Ans: Stable

Explain Closed loop and Open loop system with sketch.

Description : Explain Closed loop and Open loop system with sketch. 

Last Answer : Closed Loop System: [1] The name indicates that the closed loop control system has a loop that is closed as shown in figure. [2] A feedback device is used for this purpose. This makes ... system is generally used in point-to-point systems where the accuracy requirements are not critical. 

With the help of block diagram explain closed loop control CNC system.

Description : With the help of block diagram explain closed loop control CNC system. 

Last Answer : Special motors called servos are used for executing machine movements in closed loop system. The name indicates that the closed loop control system has a loop that is closed as shown in fig. ... to the drive unit and the cycle repeats until there is no error signal from the comparator.

Describe open loop and closed loop system.

Description : Describe open loop and closed loop system.

Last Answer : Open loop and closed loop system: Open system: When the input is independent of the output, the system is called open- loop system. The control action is based on only some ... system is called closed- loop control system. The output is continuously measured and fed to the input. 

Difference between open loop and closed loop control system

Description : Difference between open loop and closed loop control system

Last Answer : Difference between open loop and closed loop control system : Sr No. Open loop control system Closed loop control system  1 Feedback doesn't exists Feedback exists 2 ... and hence costly 9 Highly affected by nonlinearities Reduced effect of non-linearity

With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in shape. (3) All the cells in the loop that have a plus or minus sign, except the starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Description : With respect to a loop in the transportation table, which one of the following is not correct? (1) Every loop has an odd no. of cells and at least 5. (2) Closed loops may or may not b square in ... starting cell, must be occupied cells. (4) Every loop has an even no. of cells and at least four.

Last Answer : Every loop has an odd no. of cells and at least 5.

For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to

Description : For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to

Last Answer : For a feedback amplifier, if the loop gain is much greater than unity, the closed loop gain will be equal to inverse of feedback factor

The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0.

Description : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Last Answer : The characteristic equation for a closed loop system with forward gain K is s4 + 4s3 + 8s2 + 6s + K = 0. The critical gain value Kc for stability should not exceed  (a) 3.25 (b) 9.75 (c) 13.0 (d) 23.3

Order of the open loop transfer function is_____ to order of closed loop transfer function

Description : Order of the open loop transfer function is _____ to order of closed loop transfer function   (a) not equal (b) equal (c) less than (d) greater than 

Last Answer : Order of the open loop transfer function is equal to order of closed loop transfer function 

In the ideal closed loop operational amplifier, the gain depends on

Description : In the ideal closed loop operational amplifier, the gain depends on (A) value of the series component (B) value of the feedback component (C) on the operational amplifier itself (D) both A and B

Last Answer : In the ideal closed loop operational amplifier, the gain depends on (A) value of the series component (B) value of the feedback component (C) on the operational amplifier itself (D) both A and B

After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be

Description : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle criterion alone (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Last Answer : After drawing the Root-Locus, the closed-loop poles corresponding to a specified value of gain K can be determined from which of the following criterion ? (A) Magnitude criterion alone (B) Angle ... (C) Both Magnitude and Angle criteria (D) Angle of departure and angle of arrival.

Negative feedback in a closed-loop control system DOES NOT

Description : Negative feedback in a closed-loop control system DOES NOT (A) reduce the overall gain (B) reduce bandwidth (C) improve disturbance rejection (D) reduce sensitivity to parameter variation

Last Answer : Negative feedback in a closed-loop control system DOES NOT reduce bandwidth

An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop...

Description : An OP amp has an open loop gain of 1,00,000. If the feedback fraction is 0.02, the approximate closed loop gain is (a) 1 (b) 1,00,000 (c) 50 (d) 0.02

Last Answer : The closed loop gain Ag = G/(1+G*f) Where G is the open loop gain and f is the feedback fraction  So Ag = 49.975

The closed loop gain of an OPAMP is dependent upon, whether the OP AMP is used : -

Description : The closed loop gain of an OPAMP is dependent upon, whether the OP AMP is used : -  a) in inverting mode b) in non -inverting mode c) is independent of the fact whether the ... inverting terminal d) is depending upon the fact whether the input is connected to inverting or non -inverting terminal

Last Answer : The closed loop gain of an OPAMP is dependent upon, whether the OP AMP is used : - is depending upon the fact whether the input is connected to inverting or non -inverting terminal

In a closed loop control system ...

Description : In a closed loop control system  (a) control action depends upon the output and also on the input command (b) output signal is fed back to be compared with the reference signal (c) the accuracy is better than in the open loop system (d) all of the above

Last Answer : In a closed loop control system control action depends upon the output and also on the input command , output signal is fed back to be compared with the reference signal , the accuracy is better than in the open loop system. 

If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is...

Description : If the characteristics equation of a closed loop system is s2+2s+2=0, then the system is  (A) Over damped (B) Critically damped (C) Under damped (D) Undamped 

Last Answer : C. Solving the above character equation gives complex roots -1+i and -1-i. If we plot that roots on real and imaginary axis plane(s-plane), it will be completely on left side of s-plane. So, the oscillations of the above conjugate roots are underdamped and are absolutely stable.

In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to_________.

Last Answer : In a closed-loop system in which the output is the speed of a motor, the output rate control can be used to limit the acceleration of the motor.

The closed-loop voltage gain of an inverting amplifier equal to

Last Answer : The closed-loop voltage gain of an inverting amplifier equal to The feedback resistance divided by the input resistance.

A non inverting closed loop op amp circuit generally has a gain factor

Last Answer : A non inverting closed loop op amp circuit generally has a gain factor Greater than one.

_____is a closed loop system.

Description : _____is a closed loop system.

Last Answer : Auto-pilot for an aircraft is a closed loop system.

In closed loop control system, with positive value of feedback gain the overall gain of the system will

Description : In closed loop control system, with positive value of feedback gain the overall gain of the system will

Last Answer : In closed loop control system, with positive value of feedback gain the overall gain of the system will decrease.

What are some examples of a closed loop system?

Description : What are some examples of a closed loop system?

Last Answer : C.L s/m. EX. Air conditioner (AC), rocket launcher, radar system, voltage stabilizer etc.

In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Description : In a typical velocity servo block diagram what device is placed in the feedback loop that is not present in the position servo?

Last Answer : Tachometer.

In an open-loop control system, what action reduces the input to zero so the load is stopped at the desired position?

Description : In an open-loop control system, what action reduces the input to zero so the load is stopped at the desired position?

Last Answer : Usually the operator senses the desired load movement and reduces the input to stop the motor.

What loop of a cooling system is often supplied by sea water?

Description : What loop of a cooling system is often supplied by sea water?

Last Answer : The primary loop.

Describe the two common designs for desktop computer?

Description : Describe the two common designs for desktop computer?

Last Answer : two common designs for desktop computer are1 horizontally oriented system unit2 vertically oriented tower