A capacitor and coil in parallel is called

A capacitor and coil in parallel is called
by

2 Answers

Answer :

A capacitor and coil in parallel is called Tuned Circuit

by

Answer :

1. A tuned circuit
by

Related questions

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency oscillation. A. Heating and expansion of oscillator coil B. DC and RF ac heating of resistors which cause change in values C. Heating of capacitor in the oscillatorD. Loose connections in the oscillator, amplifier, or antenna circuits.

Description : One of the following is a possible cause of an abrupt frequency variation in a self exited transmitter oscillator circuits resulting to a poor frequency stability to hold a constant frequency ... capacitor in the oscillator D. Loose connections in the oscillator, amplifier, or antenna circuits.

Last Answer : D. Loose connections in the oscillator, amplifier, or antenna circuits.

What component in the telephone set has the primary function of interfacing the handset to the local loop? A. Varistor B. Induction coil C. Resistor D. Capacitor

Description : What component in the telephone set has the primary function of interfacing the handset to the local loop? A. Varistor B. Induction coil C. Resistor D. Capacitor

Last Answer : B. Induction coil

What component in the telephone set has the primary function of interfacing the handset to the local loop? A. Varistor B. Induction coil C. Resistor D. Capacitor

Description : What component in the telephone set has the primary function of interfacing the handset to the local loop? A. Varistor B. Induction coil C. Resistor D. Capacitor

Last Answer : B. Induction coil

A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do one of the following things. Will it: w) flow in one direction, beginning at a maximum and decreasing rapidly to zero x) oscillate indefinitely y) oscillate but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency

Description : A capacitor and a coil are connected in series. The capacitor is charged and allowed to discharge through the coil. The current that will then flow through the capacitor-coil combination will do ... but diminish steadily to zero z) oscillate at high frequency at first but then at slower frequency  

Last Answer : ANSWER: Y -- OSCILLATE BUT DIMINISH STEADILY TO ZERO

A dielectric material is placed in between the plates of a capacitor, it

Last Answer : A dielectric material is placed in between the plates of a capacitor, it Increases the capacitance.

In a power supply a shorted input capacitor is likely to result in

Last Answer : In a power supply a shorted input capacitor is likely to result in No voltage output.

A capacitor stores energy in

Last Answer : A capacitor stores energy in Dielectric dipole

The capacitor charging current is

Last Answer : The capacitor charging current is An exponential growth function

The voltage across a capacitor _____ the current through it by ______

Last Answer : The voltage across a capacitor Lags the current through it by 90

For a pure capacitor, the voltage current relationship is:

Last Answer : For a pure capacitor, the voltage-current relationship is: Voltage lags current by 90*

Why shunt capacitor is used?

Description : Why shunt capacitor is used?

Last Answer : To improve voltage at receiving end and power factor

Why capacitor bank is used?

Description : Why capacitor bank is used?

Last Answer : In industrial or factory used E.B Power supply must be maintained above 0.90 power factor is compulsory for avoid EB Penalty. So APFC ( automatic Power factor control ) panel is used to maintained balance the load and PF maintained.

How do you charge a capacitor with a battery?

Description : How do you charge a capacitor with a battery?

Last Answer : The  capacitor  is  connected   in  parallel  with   the  battery.

What is the symbol of a capacitor?

Description : What is the symbol of a capacitor?

Last Answer : symbol of a capacitor

Which side of a capacitor is negative?

Description : Which side of a capacitor is negative?

Last Answer : In electrolytic type negative is shorter lead and usually mark in the tank. But of course not applicable to non-polar.

does capacitor store energy ?

Description : does capacitor store energy ?

Last Answer : yes capacitor stores energy

when capacitor act as open circuit?

Description : when capacitor act as open circuit?

Last Answer : When a DC is applied to capacitor it acts as open circuit .

which capacitor stores more charge ?

Description : which capacitor stores more charge ?

Last Answer : supercapacitor

what does a capacitor do?

Description : what does a capacitor do?

Last Answer : It store energy in.the form of charges It allows AC but restricted DC

The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second...

Description : The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second coil has an inductance of 105 mH. What is the mutual inductance between the coils?  (1) 3.54 mH (2) 7.88 mH (3) 39.9 mH (4) 189.3 mH

Last Answer : The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second coil has an inductance of 105 mH. 39.9 mH is the mutual inductance between the coils.

On doubling the number of turns of a coil the inductance

Last Answer : On doubling the number of turns of a coil the inductance Quadruples.

A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate is at `x = 0` and positive plate is at `x = 3d`. The

Description : A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate is at `x = 0` and positive plate is at `x = 3d`. The

Last Answer : A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate ... at fist, then decreases and again increase.

Electrons are observed to be ejected in various directions with negligible speed from the negative plate of a parallel plate capacitor when the plate

Description : Electrons are observed to be ejected in various directions with negligible speed from the negative plate of a parallel plate capacitor when the plate

Last Answer : Electrons are observed to be ejected in various directions with negligible speed from the negative ... are the electron mass and charge respectively.

A parallel plate capacitor with area of each plate equal to `S` and the separation between them to `d` is put into a stream of conducting liquid with

Description : A parallel plate capacitor with area of each plate equal to `S` and the separation between them to `d` is put into a stream of conducting liquid with

Last Answer : A parallel plate capacitor with area of each plate equal to `S` and the separation between them to ... highest? What is this highest power equla to ?

A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two back-to-back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Description : A triac thyristor functions as a control device and is basically ________________. A. two NPN transistors in parallel with a common base lead B. a diode in series with a temperature sensitive capacitor C. two ... -back SCR's with a common gate lead D. a triode tube with an extra heavy grid element

Last Answer : Answer: C

To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series

Description : To electrically decrease the length of an antenna. A. add an inductor in series B. add an inductor in parallel C. add a resistor in series D. add a capacitor in series

Last Answer : D. add a capacitor in series

Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series

Description : Increasing the electrical length of an antenna means A. add an inductor in parallel B. add a capacitor in series C. add an inductor series D. add a resistor is series

Last Answer : C. add an inductor series

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

In a capacitor filter, is the capacitor in series or in parallel with the load?

Description : In a capacitor filter, is the capacitor in series or in parallel with the load?

Last Answer : Parallel.

In a capacitor filter, is the capacitor in series or parallel with the load?

Description : In a capacitor filter, is the capacitor in series or parallel with the load?

Last Answer : Parallel.

In a capacitor start single-phase induction motor, the capacitor is connected (A) in series with main winding. (B) in series with auxiliary winding. (C) in series with both the windings. (D) in parallel with auxiliary winding.

Description : In a capacitor start single-phase induction motor, the capacitor is connected (A) in series with main winding. (B) in series with auxiliary winding. (C) in series with both the windings. (D) in parallel with auxiliary winding.

Last Answer : Ans: B To make single phase motor self start. We split the phases at 90 degree. Hence, motor behaves like a two phase motor.

A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination?

Description : A two farad and a four farad capacitor are connected in parallel. What single capacitance is "equivalent" to this combination? 

Last Answer : ANSWER: 6 FARADS

The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Description : The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Last Answer : ANSWER: Z -- QUADRUPLED

If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Description : If a three farad capacitor and a six farad capacitor are connected in parallel, what is their equivalent capacitance?

Last Answer : ANSWER: 9 FARADS

A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Description : A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Last Answer : ANSWER: W -- CONSTANT

For a parallel-plate capacitor with plate area "A" and plate separation "d", the capacitance is proportional to which of the following? w) A divided by d squared x) A times d y) A divided by d z) d divided by A

Description : For a parallel-plate capacitor with plate area "A" and plate separation "d", the capacitance is proportional to which of the following? w) A divided by d squared x) A times d y) A divided by d z) d divided by A

Last Answer : ANSWER: Y -- A DIVIDED BY D

Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?

Description : Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?

Last Answer : ANSWER: 250 VOLTS PER METER or 250 NEWTONS PER COULOMB

Series and parallel capacitor problem

Description : Series and parallel capacitor problem

Last Answer : Series and parallel capacitor problem 1 : https://youtu.be/MSl5mRwtjAE Series and parallel capacitor problem 2 : https://youtu.be/yGwbpyEtIyw Series and parallel capacitor problem 3 : https:// ... https://youtu.be/_7KwEwWqiNU Series and parallel capacitor problem 10 : https://youtu.be/et8MCWV_OyE

For a parallel plate capacitor which is being charged out of the following the incorrect statement is

Description : For a parallel plate capacitor which is being charged out of the following the incorrect statement is   (A) Energy stored in the capacitor does not enter it through the connecting wire through the space ... .   (D) The poynting vector points everywhere radially in to the volume between the plates.

Last Answer : For a parallel plate capacitor which is being charged out of the following the incorrect statement is   (A) Energy stored in the capacitor does not enter it through the connecting wire through the ...    (D) The poynting vector points everywhere radially in to the volume between the plates.

Plate separation of a parallel plate air capacitor is reduced keeping the voltage constant.

Description : Plate separation of a parallel plate air capacitor is reduced keeping the voltage constant. The energy stored in the capacitor shall • Increase • Decrease • Remain constant • Remain zero

Last Answer : Plate separation of a parallel plate air capacitor is reduced keeping the voltage constant. The energy stored in the capacitor shall Increase

iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through its plane. b)rotate to minimize the magnetic flux through its plane.c) not experience any torque since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Description : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel to the magnetic lines of force. Then the coil willa) rotate to maximize the magnetic flux through ... since the magnetic flux through its plane is zero.d) experience the constant torque equal to NBIA

Last Answer : iv) A rectangular coil free to rotate is placed in uniform magnetic field with its plane parallel ... d) experience the constant torque equal to NBIA

A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Description : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Last Answer : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance ... is (0.02)x in mJ. Find valuie of x.

Why in an ammeter low resistance is connected in parallel with the coil?

Description : Why in an ammeter low resistance is connected in parallel with the coil?

Last Answer : Feel Free to Answer

When an operating motor is connected to the controller shown in the illustration, the a path of current flow through the circuit is ____________. EL-0010 A. 'L1', stop button, start button, coil 'CR', 'L2' B. 'L1', stop button, 'CR' and 'M' contacts, 'M' coil, 'OL contacts, the 'CR' coil in parallel, 'L2' C. 'L1', stop button, jog button, 'CR' contact, 'CR' relay, 'L2' D. 'L1', stop button, start button, 'CR' contact, 'M' contact, 'CR' coil, 'L2'

Description : When an operating motor is connected to the controller shown in the illustration, the a path of current flow through the circuit is ____________. EL-0010 A. 'L1', stop button, start button, coil 'CR', 'L2' B. 'L1' ... L2' D. 'L1', stop button, start button, 'CR' contact, 'M' contact, 'CR' coil, 'L2'

Last Answer : Answer: B

The KW load is evenly distributed between two alternators just placed in parallel by adjusting _____________. A. a balance coil B. the governor settings C. the field excitation D. a rheostat

Description : The KW load is evenly distributed between two alternators just placed in parallel by adjusting _____________. A. a balance coil B. the governor settings C. the field excitation D. a rheostat

Last Answer : Answer: B

If two AC generators have just been placed in parallel, the true power load is initially distributed evenly by _____________. A. a balance coil B. changing field excitation C. adjusting the governor control settings D. a rheostat

Description : If two AC generators have just been placed in parallel, the true power load is initially distributed evenly by _____________. A. a balance coil B. changing field excitation C. adjusting the governor control settings D. a rheostat

Last Answer : Answer: C

To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Description : To limit the current flow through a DC voltmeter to as low a value as possible, the moving coil circuit is provided with a/an _____________. A. high series resistance B. high parallel resistance C. series inductor D. external shunt

Last Answer : Answer: A

When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Description : When a resistor is used as a shunt and is connected in parallel with a meter movement coil, it will provide _____________. A. a measurement of circuit resistance B. an increased accuracy of approximately 1.5 percent C. an extended meter range D. none of the above

Last Answer : Answer: C

The basic meter movement responds to the flow of current through its coil. Therefore, this meter movement may be used as a/an _____________. A. voltmeter by placing a resistance in parallel with the coil B. ohmmeter by placing another meter movement in parallel with the coil C. wattmeter by placing a battery in parallel with the coil D. ammeter by placing a low resistance in parallel with the coil

Description : The basic meter movement responds to the flow of current through its coil. Therefore, this meter movement may be used as a/an _____________. A. voltmeter by placing a resistance in parallel with the ... in parallel with the coil D. ammeter by placing a low resistance in parallel with the coil

Last Answer : Answer: D