Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?

Five volts are applied across the plates of a parallel plate capacitor. The distance of separation of the plates is .02 meters. What is the magnitude of the electric field inside the capacitor?
by

1 Answer

Answer :

ANSWER: 250 VOLTS PER METER or 250 NEWTONS PER COULOMB
by

Related questions

A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Description : A constant potential difference is applied across the plates of a parallel-plate capacitor. Neglecting any edge effects, the electric field inside the capacitor is: w) constant x) varying as one over r squared y) decreasing as one moves from the positive to the negative plate z) zero

Last Answer : ANSWER: W -- CONSTANT

Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x) The magnitude of the charge is the same on all of the capacitor plates. y) The capacitance of the system depends on the voltage applied across the three capacitors.

Description : Three capacitors with different capacitances are connected in series. Which of the following statements is TRUE? w) All three of the capacitors have the same potential difference between their plates. x ... y) The capacitance of the system depends on the voltage applied across the three capacitors.

Last Answer : ANSWER: X -- THE MAGNITUDE OF THE CHARGE IS THE SAME ON ALL OF THE CAPACITOR PLATES

A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Description : A 10 farad capacitor is used in a circuit. The voltage difference between the plates of the capacitor is 20 volts. What is the magnitude of the charge on each of the capacitor's plates?

Last Answer : ANSWER: 200 COULOMBS

For a parallel-plate capacitor with plate area "A" and plate separation "d", the capacitance is proportional to which of the following? w) A divided by d squared x) A times d y) A divided by d z) d divided by A

Description : For a parallel-plate capacitor with plate area "A" and plate separation "d", the capacitance is proportional to which of the following? w) A divided by d squared x) A times d y) A divided by d z) d divided by A

Last Answer : ANSWER: Y -- A DIVIDED BY D

Which of the following phrases completes the following statement: The strength of the electric field between two oppositely charged parallel plates is: w) a maximum midway between the plates x) a maximum near the positively charged plate y) constant between the plates except near the edges z) zero midway between the plates

Description : Which of the following phrases completes the following statement: The strength of the electric field between two oppositely charged parallel plates is: w) a maximum midway between the plates x) a maximum ... plate y) constant between the plates except near the edges z) zero midway between the plates

Last Answer : ANSWER: Y -- CONSTANT BETWEEN THE PLATES EXCEPT NEAR THE EDGES

A parallel plate capacitor with area of each plate equal to `S` and the separation between them to `d` is put into a stream of conducting liquid with

Description : A parallel plate capacitor with area of each plate equal to `S` and the separation between them to `d` is put into a stream of conducting liquid with

Last Answer : A parallel plate capacitor with area of each plate equal to `S` and the separation between them to ... highest? What is this highest power equla to ?

Plate separation of a parallel plate air capacitor is reduced keeping the voltage constant.

Description : Plate separation of a parallel plate air capacitor is reduced keeping the voltage constant. The energy stored in the capacitor shall • Increase • Decrease • Remain constant • Remain zero

Last Answer : Plate separation of a parallel plate air capacitor is reduced keeping the voltage constant. The energy stored in the capacitor shall Increase

A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa

Description : A Bingham fluid of viscosity μ = 10 Pa.s and yield stress, τ0 = 10 KPa, is shared between flat parallel plates separated by a distance of 10 -3 m. The top plate is moving with a velocity of 1 m/s. The shear stress on the plate is (A) 10 KPa (B) 20 KPa (C) 30 KPa (D) 40 KPa

Last Answer : (B) 20 KPa

Electric field strength on a dust particle having charge equal to 8 × 10- 19 when plates are separated by distance of 2 cm and have a potential difference of 5 kV is A. 2.0 × 10-13 NB. 3 NC. 5 ND. 20 N

Description : Electric field strength on a dust particle having charge equal to 8 × 10- 19 when plates are separated by distance of 2 cm and have a potential difference of 5 kV is A. 2.0 × 10-13 N B. 3 N C. 5 N D. 20 N

Last Answer : 2.0 × 10-13 N

According to Gauss' Law, the magnitude of the electric field is zero everywhere inside a conductor if: w) electrostatic equilibrium is achieved x) the surface is a metal y) the conductor is moving z) the conductor is a non-Gaussian surface

Description : According to Gauss' Law, the magnitude of the electric field is zero everywhere inside a conductor if: w) electrostatic equilibrium is achieved x) the surface is a metal y) the conductor is moving z) the conductor is a non-Gaussian surface

Last Answer : ANSWER: W -- ELECTROSTATIC EQUILIBRIUM IS ACHIEVED

insulator which is placed between 2 plates of capacitor isA. electric B. dielectric C. inductor D. resistor

Description : insulator which is placed between 2 plates of capacitor isA. electric B. dielectric C. inductor D. resistor

Last Answer : dielectric

The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Description : The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Last Answer : ANSWER: Z -- QUADRUPLED

The electrostatic energy in an electric field does not depend on which of the following? a) Magnitude of charges b) Permittivity c) Applied electric field d) Flux lines

Description : The electrostatic energy in an electric field does not depend on which of the following? a) Magnitude of charges b) Permittivity c) Applied electric field d) Flux lines

Last Answer : c) Applied electric field

The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Description : The value of the capacitance depends upon the________________? A.voltage applied B. thickness of the capacitor plates C. geometry of the capacitor D. dinsity of the capacitor plates

Last Answer : Ans: C

In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor

Description : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor  A) Is always zero B) Can never be greater than the input voltage C) Can be greater than the input ... input voltage D) Can be greater than the input voltage, and is in phase with the input voltage

Last Answer : In a series RLC circuit at resonance, the magnitude of the voltage developed across the capacitor Can be greater than the input voltage, however, it is 90° out of phase with the input voltage 

If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Description : If the capacitors are connected in parallel, then the potential difference across each capacitor is A. same B. different C. zero D. infinite

Last Answer : same

Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates 2) The fracture line runs above and parallel to the palate and crosses lower part of nasal septum, maxillary antra and the pterygoid plates 3) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Description : Which of the following is characteristic feature of Le Fort II fracture Options: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary ... ) Complete separation of the facial bones from the cranial bones 4) Isolated fracture of orbital floor

Last Answer : Correct Answer: 1) The fracture line runs through the root of the nose, lacrimal bone, floor of orbit, upper part of maxillary sinus and pterygoid plates

The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Description : The plate voltage of a tube will vary 126 volts when a 3-volt ac signal is applied to the control grid. What is the gain of this tube?

Last Answer : 42.

The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of transforme 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

In the illustration, 12 volts is applied to the circuit where the resistance of R1 is 10 ohms and R2 is 10 ohms. what is the voltage across R2? EL-0036 A. 1.2 volts B. 2 volts C. 6 volts D. 12 volts

Description : In the illustration, 12 volts is applied to the circuit where the resistance of R1 is 10 ohms and R2 is 10 ohms. what is the voltage across R2? EL-0036 A. 1.2 volts B. 2 volts C. 6 volts D. 12 volts

Last Answer : Answer: C

As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 110 ohms, and R2 is 10 kohms what is the voltage measured across R1 EL-0036 A. 11.86 volts B. .131 volts C. 12 volts D. .673 volts

Description : As shown in the illustration if the applied voltage is 12 VDC, the resistance of R1 is 110 ohms, and R2 is 10 kohms what is the voltage measured across R1 EL-0036 A. 11.86 volts B. .131 volts C. 12 volts D. .673 volts

Last Answer : Answer: B

In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. act as a short circuit for the sensing coil when CEMF is applied B. insure that the voltage across the coil does not exceed 9 volts C. improve response time D. act as a filter to prevent hunting

Description : In the illustration, the diode between terminals 16 and 17 is to _________. EL-0046 A. act as a short circuit for the sensing coil when CEMF is applied B. insure that the voltage across the coil does not exceed 9 volts C. improve response time D. act as a filter to prevent hunting

Last Answer : Answer: A

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 440 volts

Last Answer : Answer: B

The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 110 volts were applied to terminals 'X1,3' and 'X2,4', what would be indicated across 'H1' and 'H2'? EL-0082 A. 27.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: D

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' & 'H2', what would be indicated across 'X1' & 'X4' with 'X2' & 'X3' connected and isolated? EL-0082 A. 110 volts B. 220 volts C. 880 volts D. 1760 volts

Last Answer : Answer: B

The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 220 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X3' and 'X4'? EL-0082 A. 55 volts B. 110 volts C. 440 volts D. 880 volts

Last Answer : Answer: A

The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Description : The turns ratio of device 'B' shown in the illustration is two to one (total). If 440 volts were applied to terminals 'H1' and 'H2', what would be indicated across 'X1,3' and 'X2,4'? EL-0082 A. 55 volts B. 110 volts C. 220 volts D. 880 volts

Last Answer : Answer: B

The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are evenly spaced. If 110 volts were applied to terminals 'X1' and 'X3', what would be indicated across 'H1' and 'H2'? EL-0082 A. 37.5 volts B. 55 volts C. 220 volts D. 440 volts

Last Answer : Answer: C

The turns ratio of device 'A' shown in the illustration is four to one and all the taps are equally spaced. If 120 volts were applied between 'X1' and 'X2', what would be indicated across 'H1' and 'H4'? EL-0082 A. 30 volts B. 120 volts C. 480 volts D. 1440 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all the taps are equally spaced. If 120 volts were applied between 'X1' and 'X2', what would be indicated across 'H1' and 'H4'? EL-0082 A. 30 volts B. 120 volts C. 480 volts D. 1440 volts

Last Answer : Answer: D

If the line voltage to the controller shown in the illustration is 440 volts, what is applied across the control circuit? EL-0080 A. 110 volts B. 220 volts C. 440 volts D. 660 volts

Description : If the line voltage to the controller shown in the illustration is 440 volts, what is applied across the control circuit? EL-0080 A. 110 volts B. 220 volts C. 440 volts D. 660 volts

Last Answer : Answer: C

The turns ratio of device 'A' shown in the illustration is four to one and all taps are equally spaced. If 440 volts were applied between 'H1' and 'H4', what would appear across 'X1' and 'X4'? EL-0082 A. 110 volts B. 220 volts C. 440 volts D. 1760 volts

Description : The turns ratio of device 'A' shown in the illustration is four to one and all taps are equally spaced. If 440 volts were applied between 'H1' and 'H4', what would appear across 'X1' and 'X4'? EL-0082 A. 110 volts B. 220 volts C. 440 volts D. 1760 volts

Last Answer : Answer: A

If the line voltage to the controller shown in the illustration is 440 volts, what voltage is applied across the motor when contacts 'S' close? EL-0080 A. 110 volts B. 220 volts C. 440 volts D. 660 volts

Description : If the line voltage to the controller shown in the illustration is 440 volts, what voltage is applied across the motor when contacts 'S' close? EL-0080 A. 110 volts B. 220 volts C. 440 volts D. 660 volts

Last Answer : Answer: B

Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of

Description : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

Last Answer : Twelve volts are applied across a resistor. A current of 3 mA is measured. What is the value of the resistor? A.4 ohms B.400 ohms C.4 kohms D.4.4 ohms

A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?

Description : A circuit which employs a DIRECT CURRENT source has a branch which contains a capacitor. After the circuit has reached a steady state, what is the magnitude of the current in the circuit branch which contains the capacitor?

Last Answer : ANSWER: THE CURRENT IS ZERO

In case of Couette flow, the fluid flow is between two large flat parallel plates with (A) Top plate moving and the bottom plate fixed (B) Bottom plate moving and the top plate fixed (C) Both the plates fixed (D) Both the plates moving

Description : In case of Couette flow, the fluid flow is between two large flat parallel plates with (A) Top plate moving and the bottom plate fixed (B) Bottom plate moving and the top plate fixed (C) Both the plates fixed (D) Both the plates moving

Last Answer : (A) Top plate moving and the bottom plate fixed

What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF,

Description : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

Last Answer : What is the charge on each capacitor when a 150 V is applied across two capacitors with values 5 μF and 10 μF, connected in series? A) 500 μC B) 0.5 μC C) 0.5 C D) None of these

What is the stored energy when 200 V is applied across a 7 μF capacitor?

Description : What is the stored energy when 200 V is applied across a 7 μF capacitor? A) 1400 Joules B) 0.7 Joules C) 0.14 Joules D) None of these

Last Answer : What is the stored energy when 200 V is applied across a 7 μF capacitor? A) 1400 Joules B) 0.7 Joules C) 0.14 Joules D) None of these

A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate is at `x = 0` and positive plate is at `x = 3d`. The

Description : A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate is at `x = 0` and positive plate is at `x = 3d`. The

Last Answer : A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate ... at fist, then decreases and again increase.

Electrons are observed to be ejected in various directions with negligible speed from the negative plate of a parallel plate capacitor when the plate

Description : Electrons are observed to be ejected in various directions with negligible speed from the negative plate of a parallel plate capacitor when the plate

Last Answer : Electrons are observed to be ejected in various directions with negligible speed from the negative ... are the electron mass and charge respectively.

For a parallel plate capacitor which is being charged out of the following the incorrect statement is

Description : For a parallel plate capacitor which is being charged out of the following the incorrect statement is   (A) Energy stored in the capacitor does not enter it through the connecting wire through the space ... .   (D) The poynting vector points everywhere radially in to the volume between the plates.

Last Answer : For a parallel plate capacitor which is being charged out of the following the incorrect statement is   (A) Energy stored in the capacitor does not enter it through the connecting wire through the ...    (D) The poynting vector points everywhere radially in to the volume between the plates.

If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Description : If charge stored on plates of capacitor is large, then capacitance will be A. small B. large C. zero D. infinite

Last Answer : large

If the plates of capacitor are oppositely charged then the total charge is equal to A. negative B. positive C. zero D. infinite

Description : If the plates of capacitor are oppositely charged then the total charge is equal to A. negative B. positive C. zero D. infinite

Last Answer : zero

Capacitors and inductors are commonly used in circuits. Capacitors store electrical energy in the electric field between their plates. How do inductors store energy?

Description : Capacitors and inductors are commonly used in circuits. Capacitors store electrical energy in the electric field between their plates. How do inductors store energy?

Last Answer : ANSWER: IN A MAGNETIC FIELD SURROUNDING THE INDUCTOR 

What would be the voltage drop across the parallel branches of the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Description : What would be the voltage drop across the parallel branches of the circuit shown in the illustration if the source is 30 volts the resistance for R1 is 10 ohms, R2 is 10 ohms and R3 is 10 ohms? EL-0032 A. 5 volts B. 10 volts C. 20 volts D. 30 volts

Last Answer : Answer: B

At time t=0, a body has a velocity of 5 meters per second, EASTWARD; at time t=2 seconds, its velocity is 7 meters per second WESTWARD. What is the MAGNITUDE of the body's average acceleration?

Description : At time t=0, a body has a velocity of 5 meters per second, EASTWARD; at time t=2 seconds, its velocity is 7 meters per second WESTWARD. What is the MAGNITUDE of the body's average acceleration? 

Last Answer : ANSWER: 6 METERS PER SECOND SQUARED

A helicopter is ascending vertically with a constant speed of 6 meters per second relative to the ground. At the instant the helicopter is 60 meters above the ground it releases a package. What is the magnitude and direction of the velocity of the package, relative to the ground, the instant the package is released by the helicopter?

Description : A helicopter is ascending vertically with a constant speed of 6 meters per second relative to the ground. At the instant the helicopter is 60 meters above the ground it releases a package. What is ... of the package, relative to the ground, the instant the package is released by the helicopter?

Last Answer : ANSWER: 6 METERS/SECOND UP

A toy train moves in a circle of 8 meters radius with a speed of 4 meters per second. What is the magnitude of the acceleration of the train?

Description : A toy train moves in a circle of 8 meters radius with a speed of 4 meters per second. What is the magnitude of the acceleration of the train?

Last Answer : ANSWER: 2 METERS PER SECOND SQUARED

A boy is standing on an elevator which is traveling downward with a constant velocity of 30 meters per second. The boy throws a ball vertically upward with a velocity of 10 meters per second relative to the elevator. What is the velocity of the ball, MAGNITUDE AND DIRECTION, relative to the elevator shaft the instant the boy releases the ball?

Description : A boy is standing on an elevator which is traveling downward with a constant velocity of 30 meters per second. The boy throws a ball vertically upward with a velocity of 10 meters per second ... the ball, MAGNITUDE AND DIRECTION, relative to the elevator shaft the instant the boy releases the ball?

Last Answer : ANSWER: 20 METERS PER SECOND DOWN

Velocity distribution for flow between two fixed parallel plates (A) Varies parabolically across the section (B) Is constant over the entire cross-section (C) Is zero at the plates and increases linearly to the mid-plane (D) None of these

Description : Velocity distribution for flow between two fixed parallel plates (A) Varies parabolically across the section (B) Is constant over the entire cross-section (C) Is zero at the plates and increases linearly to the mid-plane (D) None of these

Last Answer : (A) Varies parabolically across the section

The distance between a generator and its load is 100 feet. What would be the approximate total voltage drop across a two wire supply cable if the current were 5.5 amperes and the resistance of the wire were 2.525 ohms per 1,000 feet? A. 0.5 volts B. 1.38 volts C. 1.90 volts D. 2.77 volts

Description : The distance between a generator and its load is 100 feet. What would be the approximate total voltage drop across a two wire supply cable if the current were 5.5 amperes and the resistance of the wire were 2.525 ohms per 1,000 feet? A. 0.5 volts B. 1.38 volts C. 1.90 volts D. 2.77 volts

Last Answer : Answer: D