What causes the battery terminal connection on a car to corrode?

What causes the battery terminal connection on a car to corrode?
by

1 Answer

Answer :

Well one is a negative charge and it just gives off bad vibes and takes everyone down.
by

Related questions

Give reasons: a) Optic fibres do not corrode.

Description : Give reasons: a) Optic fibres do not corrode.

Last Answer : As optic fibres do not react with air or water

Which metal is used for making boats because it does not corrode by seawater? -Do You Know?

Description : Which metal is used for making boats because it does not corrode by seawater? -Do You Know?

Last Answer : Tin does not act as a sacrificial metal. Instead, it acts only as a barrier to stop air and water reaching the surface of the iron or steel. The tin layer may actually make rusting happen faster if it gets scratched, because then iron loses electrons in preference to tin.

Why does aluminum not corrode like iron?

Description : Why does aluminum not corrode like iron?

Last Answer : On the aluminium surface a coating of protective aluminium oxide is formed.

Which metal is used for making boats because it does not corrode by seawater?

Description : Which metal is used for making boats because it does not corrode by seawater?

Last Answer : Titanium

Pick up the correct statement from the following: (A) Copper pipes are highly resistant to acidic and alkaline water (B) Wrought iron pipes are lighter than cast iron pipes (C) Wrought iron pipes corrode quickly and are less durable (D) All the above

Description : Pick up the correct statement from the following:  (A) Copper pipes are highly resistant to acidic and alkaline water  (B) Wrought iron pipes are lighter than cast iron pipes  (C) Wrought iron pipes corrode quickly and are less durable  (D) All the above

Last Answer : (D) All the above

Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E

Description : Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E

Last Answer : Answer: C

In the illustration the component C is the ____________. EL-0033 A. fixed contact B. moving contact C. connection terminal D. trip bar

Description : In the illustration the component C is the ____________. EL-0033 A. fixed contact B. moving contact C. connection terminal D. trip bar

Last Answer : Answer: A

What do the arrow-like symbols at coordinate '33J' shown in the illustration represent? EL-0099 A. Connection to ground. B. Connection to the analog common bus. C. Plug-in connection. D. Screw connection on a terminal board.

Description : What do the arrow-like symbols at coordinate '33J' shown in the illustration represent? EL-0099 A. Connection to ground. B. Connection to the analog common bus. C. Plug-in connection. D. Screw connection on a terminal board.

Last Answer : Answer: C

A diagram showing axon terminal and synapse is given. Identify correctly at least two of A - D. (a) A - Neurotransmitter, B - Synaptic cleft (b) C - Neurotransmitter, D - Ca++ (c) A - Receptor, C - Synaptic vesicles (d) B - Synaptic connection, D - K+

Description : A diagram showing axon terminal and synapse is given. Identify correctly at least two of A - D. (a) A - Neurotransmitter, B - Synaptic cleft (b) C - Neurotransmitter, D - Ca++ (c) A - Receptor, C - Synaptic vesicles (d) B - Synaptic connection, D - K+

Last Answer : (c) A - Receptor, C - Synaptic vesicles

What are the basic requirements for any splice or terminal connection?

Description : What are the basic requirements for any splice or terminal connection?

Last Answer : The connection must be both mechanically and electrically as strong as the conductor or device with which it is used

In the circuit shown in Fig. 4.63, the terminal voltage of the battery is 6.0 V. Find the current I through the `18 Omega` resistor.

Description : In the circuit shown in Fig. 4.63, the terminal voltage of the battery is 6.0 V. Find the current I through the `18 Omega` resistor.

Last Answer : In the circuit shown in Fig. 4.63, the terminal voltage of the battery is 6.0 V. Find the current I through the `18 Omega` resistor.

What does a loose or dirty battery terminal is likely to cause?

Description : What does a loose or dirty battery terminal is likely to cause?

Last Answer : Need answer

A) PayUmoney Explanation: It can allow even the smallest of merchants to start accepting card based payments. It can accept all credit/debit cards. The POS terminal is easy to set up, can be operated using a pre- or post-paid SIM, and does away with the use of paper receipts—making it cost & battery effective, and, of course, very environment friendly. With a simple and hassle-free documentation policy, a merchant can start using a PayUmoney POS terminal within 48 hours of signing up for the service.

Description : A) PayUmoney Explanation: It can allow even the smallest of merchants to start accepting card based payments. It can accept all credit/debit cards. The POS terminal is easy to set up, can be ... , a merchant can start using a PayUmoney POS terminal within 48 hours of signing up for the service.

Last Answer : Which of the following company launched “Receive and Win” campaign for Ramzan? A) Mobikwik B) Freecharge C) Paytm D) MoneyGram E) Udio

Which of the following conditions indicates that a lead-acid battery is being charged too rapidly? A. Sparks occurring at the positive terminal. B. Unusually high electrolyte specific gravity. C. Low plate potentials being developed. D. Excessively high temperatures and gassing rates.

Description : Which of the following conditions indicates that a lead-acid battery is being charged too rapidly? A. Sparks occurring at the positive terminal. B. Unusually high electrolyte specific gravity. C. Low plate potentials being developed. D. Excessively high temperatures and gassing rates.

Last Answer : Answer: D

A lead-acid battery cell sustaining a short circuit _______. A. will be indicated by lime accumulation on the terminal posts B. will have unusually high cell voltage C. will become excessively heated while being charged D. cannot be completely discharged under load

Description : A lead-acid battery cell sustaining a short circuit _______. A. will be indicated by lime accumulation on the terminal posts B. will have unusually high cell voltage C. will become excessively heated while being charged D. cannot be completely discharged under load

Last Answer : Answer: C

A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a given temperature D. specific gravity of all cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Description : A lead-acid battery is considered fully charged when the ______________. A. electrolyte gasses freely B. battery charger ammeter indicates a positive reading C. terminal voltage reaches a constant value at a ... cells reaches the correct value and no longer increases over a period of 1 to 4 hours

Last Answer : Answer: D

When choosing a battery for a particular application, major consideration should be given to the battery's ____________. A. amp-hour capacity B. terminal polarity C. stability under charge D. ambient temperature rise

Description : When choosing a battery for a particular application, major consideration should be given to the battery's ____________. A. amp-hour capacity B. terminal polarity C. stability under charge D. ambient temperature rise

Last Answer : Answer: A

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Last Answer : The internal (source) resistance of the battery will drop some of the voltage

Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Description : Terminal potential difference of a battery is greater than its emf when a. the internal resistance of battery is infinite b. the internal resistance of battery is zero c. the battery is charged d. the battery is discharged

Last Answer : c. the battery is charged

Battery Terminal Cleaners

Description : Battery Terminal Cleaners

Last Answer : Corrosion is the enemy of car batteries. It can make the most high-end cars fail to start. Battery terminals are especially prone to corrosion because of the presence of water and acid in their ... be restored. If your battery terminals have too much deposit buildup, replace them with new ones.

Battery Terminal

Description : Battery Terminal

Last Answer : Automotive battery terminals can mean either the posts on a battery to which the jumper cables attach or the part of the cables that attach to the battery's posts. The latter are sometimes ... properly maintained for the car to run smoothly. Regular inspection helps to keep them in good condition.

Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above

Description : Superchargers are driven by A. Electric current from the battery B. Exhaust gases from engine C. Direct connection with the engine power D. None of the above

Last Answer : C. Direct connection with the engine power

Turbo chargers are driven by A. Direct connection with engine power B. Exhaust gases from engine C. Electric current from the battery D. None of the above

Description : Turbo chargers are driven by A. Direct connection with engine power B. Exhaust gases from engine C. Electric current from the battery D. None of the above

Last Answer : B. Exhaust gases from engine

How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter

Description : How power supply is done to RPi? A. USB connection B. Internal battery C. Charger D. Adapter

Last Answer : A. USB connection 

What is the connection among sectionalism slavery and states rights as causes of the civil war?

Description : What is the connection among sectionalism slavery and states rights as causes of the civil war?

Last Answer : Need answer

What are some causes of poor or slow connection with satellite internet?

Description : What are some causes of poor or slow connection with satellite internet?

Last Answer : Disturbances in the atmosphere can impeded satellite transmissions. For the most part, the satellites rarely have problems or fail, but there are occasions when the service may be slowed. This is far more likely due to Web servers, however.

Which of the following 3-phase connection of a transformer causes interference with the

Description : Which of the following 3-phase connection of a transformer causes interference with the neighbouring communication lines:  (A) Delta-Star (B) Star-Delta (C) Delta-Delta (D) Star-Star

Last Answer : Which of the following 3-phase connection of a transformer causes interference with the neighbouring communication lines: Star-Star