What are the basic requirements for any splice or terminal connection?

What are the basic requirements for any splice or terminal  connection?
by

1 Answer

Answer :

The connection must be both mechanically and electrically as  strong as the conductor or device with which it is used
by

Related questions

Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Description : Should aluminum wire be cleaned prior to installing an aluminum terminal lug or splice?

Last Answer : No, it is done automatically by the petroleum abrasive compound that comes in the terminal or splices.

Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Description : Which of the splices discussed is NOT a butted splice? for noninsulated splices and terminal lugs?

Last Answer : Spaghetti or heat-shrinkable tubing.

Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Description : Which fiber optic component (splice, connector, or coupler) makes a permanent connection in a distributed system?

Last Answer : Splice.

Which type of splice is used to splice a lighting fixture to a branch circuit?

Description : Which type of splice is used to splice a lighting fixture to a branch circuit?

Last Answer : Fixture joint.

Why are the ends of the wire clamped down after a Western Union splice is made?

Description : Why are the ends of the wire clamped down after a Western Union splice is made?

Last Answer : To prevent damage to the tape insulation.

What fiber property directly affects splice loss in fusion splicing?

Description : What fiber property directly affects splice loss in fusion splicing?

Last Answer : The angles and quality of the two fiber-end faces.

The Navy recommends using the rotary splice for what two reasons?

Description : The Navy recommends using the rotary splice for what two reasons?

Last Answer : It is a low-loss mechanical splice that provides stable environmental and mechanical performance in the Navy environment, and it requires only a small amount of training.

Define a fiber optic splice.

Description : Define a fiber optic splice.

Last Answer : A permanent fiber joint whose purpose is to establish an optical connection between two individual optical fibers.

What are the three basic requirements for sound?

Description : What are the three basic requirements for sound?

Last Answer : A source, medium, and detector (receiver).

What basic circuits meet the requirements of an externally synchronized master oscillator?

Description : What basic circuits meet the requirements of an externally synchronized master oscillator?

Last Answer : Sine-wave oscillator, single-swing blocking oscillator, and master trigger (astable) multivibrator.

What basic circuits meet the requirements of an externally synchronized master oscillator?

Description : What basic circuits meet the requirements of an externally synchronized master oscillator?

Last Answer : Sine-wave oscillator, single-swing blocking oscillator, and master trigger (astable) multivibrator.

Which of the following is not fixed by the process requirements, in the design of absorbers? (A) Flow rate of the entering gas (B) Composition of the entering liquid (C) Terminal concentrations of gas stream (D) None of these

Description : Which of the following is not fixed by the process requirements, in the design of absorbers? (A) Flow rate of the entering gas (B) Composition of the entering liquid (C) Terminal concentrations of gas stream (D) None of these

Last Answer : (D) None of these

What causes the battery terminal connection on a car to corrode?

Description : What causes the battery terminal connection on a car to corrode?

Last Answer : Well one is a negative charge and it just gives off bad vibes and takes everyone down.

Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E

Description : Component F in the illustrated device is for _________. EL-0033 A. short circut protection B. latching the trip unit closed after resetting the breaker C. overload protection D. providing a flexible connection between the input terminal G and the tripping unit E

Last Answer : Answer: C

In the illustration the component C is the ____________. EL-0033 A. fixed contact B. moving contact C. connection terminal D. trip bar

Description : In the illustration the component C is the ____________. EL-0033 A. fixed contact B. moving contact C. connection terminal D. trip bar

Last Answer : Answer: A

What do the arrow-like symbols at coordinate '33J' shown in the illustration represent? EL-0099 A. Connection to ground. B. Connection to the analog common bus. C. Plug-in connection. D. Screw connection on a terminal board.

Description : What do the arrow-like symbols at coordinate '33J' shown in the illustration represent? EL-0099 A. Connection to ground. B. Connection to the analog common bus. C. Plug-in connection. D. Screw connection on a terminal board.

Last Answer : Answer: C

A diagram showing axon terminal and synapse is given. Identify correctly at least two of A - D. (a) A - Neurotransmitter, B - Synaptic cleft (b) C - Neurotransmitter, D - Ca++ (c) A - Receptor, C - Synaptic vesicles (d) B - Synaptic connection, D - K+

Description : A diagram showing axon terminal and synapse is given. Identify correctly at least two of A - D. (a) A - Neurotransmitter, B - Synaptic cleft (b) C - Neurotransmitter, D - Ca++ (c) A - Receptor, C - Synaptic vesicles (d) B - Synaptic connection, D - K+

Last Answer : (c) A - Receptor, C - Synaptic vesicles

What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Description : What is the tin-lead alloy percentage of solder used for electrical connectors, splices, and terminal lugs?

Last Answer : 60-percent tin and 40-percent lead (60/40 solder).

Why are preinsulated terminal lugs and splices color coded?

Description : Why are preinsulated terminal lugs and splices color coded?

Last Answer : To identify wire sizes they are to be used on.

Why should a lockwasher never be used with an aluminum terminal?

Description : Why should a lockwasher never be used with an aluminum terminal?

Last Answer : It gouges the terminal lug and causes deterioration.

What tools should be used to install large aluminum terminal lugs and splices?

Description : What tools should be used to install large aluminum terminal lugs and splices?

Last Answer : Power-operated crimping tools.

What is a major advantage of the crimped terminal over the soldered terminal?

Description : What is a major advantage of the crimped terminal over the soldered terminal?

Last Answer : Requires relatively little operator skill to install.

In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Description : In order to reverse bias in a PN junction, what terminal of a battery is connected to the P material?

Last Answer : Negative.

The work center supervisor can update what items from a user terminal?

Description : The work center supervisor can update what items from a user terminal?

Last Answer : COSAL, APL, EIC, SHIP'S FORCE WORK LIST, and CSMP.

What is the range of earth terminal transmitter output power?

Description : What is the range of earth terminal transmitter output power?

Last Answer : Up to 20 kilowatts.

What is the function of a tone terminal set?

Description : What is the function of a tone terminal set?

Last Answer : It converts dc to audio or vice versa.

Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Description : Why will a meter indicate more voltage at the battery terminal when the battery is out of a circuit than when the battery is in a circuit?

Last Answer : The internal (source) resistance of the battery will drop some of the voltage

In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Description : In the primary cell, why are negative ions attracted to the negative terminal of the cell?

Last Answer : The positive charge caused by electrons leaving the negative electrode attracts the negative ions.

An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Description : An ammeter should always be connected so that current will flow into what terminal and out of what terminal?

Last Answer : Negative, positive

Why all the cut and splice jobs?

Description : Why all the cut and splice jobs?

Last Answer : answer:Do you have an example of a commercial you're talking about? Maybe we can post an example? Commercials have always tended to catch the viewer's eye/attention faster than the traditional programming. What ... in the same (hotel) room. CSI kind of shows, but I believe there are worse examples.

How to splice an s-video cable to an RCA (composite) cable?

Description : How to splice an s-video cable to an RCA (composite) cable?

Last Answer : Amazon (and many others, I’m sure) has plenty of cables that should do the trick.

Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Description : Identify the problem in the following sentence:Tracy rides bulls in rodeos he’s really good. A. Fused sentence B. Comma splice C. Sentence fragment D. Dangling modifier?

Last Answer : Do you know this answer yet?

Which of the. following sentences includes a comma splice?

Description : Which of the. following sentences includes a comma splice?

Last Answer : The bakery was closed, it was a Sunday.

A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Description : A splice some contains all the following except (A) hnRNA (B) snRNAs (C) Some proteins (D) Ribosome

Last Answer : Answer : D

Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Description : Splice sites are present in (A) Prokaryotic mRNA (B) Eukaryotic mRNA (C) Eukaryotic hnRNA (D) All of these

Last Answer : Answer : C

The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps the turn before it C. apply the tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Description : The proper way to apply plastic electrical tape to an electric cable splice is to _____________. A. apply tape to the braided cover, but avoid touching it B. wind the tape so that each turn overlaps ... tape in one non-overlapping layer only D. heat the tape with a soldering iron for good bonding

Last Answer : Answer: B

What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Description : What is the average insertion loss of fusion splice in fiber optics? a. 0.09dB b. 0.9dB c. 0.19dB d. 0.009dB

Last Answer : a. 0.09dB

Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Description : Steel bars are generally connected together to get greater length than the standard length by providing (A) Straight bar splice (B) Hooked splice (C) Dowel splice (D) All the above

Last Answer : Answer: Option D

Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web splice shall be designed to resist the actual shear at the section 4. Web splice shall be designed for actual BM. Which of these statements are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Description : Consider the following statements in respect of design of web and flange as splices: 1. Flange splice shall be designed for actual BM at the section. 2. Flange splice shall be designed to resist the actual shear at the section. 3. Web ... are correct? (a) 1 and 3 (b) 2 and 3 (c) 3 and 4 (d)1 and 4

Last Answer : (a) 1 and 3

The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Description : The mechanical splice is best suited for ∙ A. quicker installation under ideal condition ∙ B. minimum attenuation losses ∙ C. field service conditions ∙ D. situations in which cost of equipment is not a factor

Last Answer : D. situations in which cost of equipment is not a factor

When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Description : When connector losses, splice losses and coupler losses are added, what is the limiting factor? ∙ A. source power ∙ B. fiber attenuation ∙ C. connector and splice loss ∙ D. detector sensitivity

Last Answer : D. detector sensitivity

Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Description : Used to test a fiber optics splice ∙ a. Spectrum analyzer ∙ b. Oscilloscope ∙ c. Optical power meter ∙ d. Field strength meter

Last Answer : c. Optical power meter

How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Description : How much is the power loss of the fusion splice? ∙ a. 0.1 dB or less ∙ b. 0.01 dB or less ∙ c. 1 dB or less ∙ d. 10 dB or less

Last Answer : a. 0.1 dB or less

The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Description : The mechanical splice attenuation loss is _____ dB or less ∙ a. 0.1 ∙ b. 0.01 ∙ c. 0.001 ∙ d. 1

Last Answer : a. 0.1

What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Description : What is the average loss in fiber splice? ∙ a. 0.10 dB ∙ b. 0.15 dB ∙ c. 0.20 dB ∙ d. 0.25 dB

Last Answer : 0.15 dB

What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Description : What is the average insertion loss of fusion splice in fiber optics? ∙ a. 0.09 dB ∙ b. 0.9 dB ∙ c. 0.19 dB ∙ d. 0.009 dB

Last Answer : ∙ b. 0.9 dB

The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB

Description : The loss in single-mode fiber-optic cable due to a splice is about: a. 0.02 dB b. 0.2 dB c. 1 dB d. 3 dB

Last Answer : a. 0.02 dB

When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Description : When connectorlosses,splice losses, and couplerlosses are added,whatisthe finallimitingfactor? a. Source power b. Fiber attenuation c. Connector and splice losses d. Detector sensitivity

Last Answer : d. Detector sensitivity

In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Description : In flange splices when the number of hammer and hand loose rivets is 30% or more of the total rivets on any side of the splice location, a) Need no be renewed b) wait for 100% loose rivets c) all the rivets should be renewed.* d) None of the above

Last Answer : c) all the rivets should be renewed.*