Which radio frequency bands use the tropospheric  scattering principle for propagation of radio waves?

1 Answer

Answer :

Vhf and above

Related questions

Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz

Last Answer : D. 300 MHz to 3 GHz

Description : Where is the tropospheric region that contributes most strongly to tropospheric scatter propagation?

Last Answer : Near the mid-point between the transmitting and receiving antennas, just above the radio horizon.

Description : Geodimeter is based on: (A) Propagation of modulated light waves (B) Propagation of infrared radiation (C) The visible light as carrier with frequency of the order of 5 × 1014 Hz (D) High frequency radio waves

Last Answer : Answer: Option A

Description : The decimetric wave is using what method of propagation? A. Ground wave B. Space wave C. Sky wave D. Tropospheric wave

Last Answer : B. Space wave

Description : What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce

Last Answer : C. Tropospheric ducting

Description : What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation

Last Answer : C. Tropospheric ducting

Description : Explain Tropospheric scatter propagation with sketch.

Last Answer : As the name implies, troposcatter uses the troposphere as the region that affects the radio signals being transmitted, returning them to Earth so that they can be received by the ... of "blurring" the overall received signal and this makes high speed data transmissions difficult.

Last Answer : Tropospheric mode of propagation is used in VHF.

Description : There is a maximum frequency at which vertically transmitted radio waves can be refracted back to Earth. What is this maximum frequency called?

Last Answer : Critical frequency.

Description : Which of the following frequency bands is best suited for sky wave propagation? A. 30 to 300 kHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 3 GHz to 30 GHz

Last Answer : B. 3 MHz to 30 MHz

Description : Which of the following frequency bands is best suited for ground wave propagation? A. 30 to 300 kHz B. 300 kHz to 3 MHz C. 3 MHz to 30 MHz D. 30 MHz to 300 MHz

Last Answer : A. 30 to 300 kHz

Description : Compared to the velocity of propagation of waves in air, what is the velocity of propagation of waves in waveguides?

Last Answer : Slower.

Description : The mode theory uses electromagnetic wave behavior to describe the propagation of the light along the fiber. What is a set of guided electromagnetic waves called?

Last Answer : Modes of the fiber.

Description : Which of the following statements is not true with respect to microwaves? (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz. (B) Propagation is line-of-sight. (C) Very ... waves cannot penetrate walls. (D) Use of certain portions of the band requires permission from authorities.

Last Answer : (A) Electromagnetic waves with frequencies from 300 GHz to 400 THz.

Description : Which of the answers listed below best completes the statement: The rate at which any part of a wave travels from one place to another determines the wave's: w) propagation velocity x) period y) amplitude z) frequency

Last Answer : ANSWER: W -- PROPAGATION VELOCITY

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

Description : ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Last Answer : A. attenuation

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

Description : It is caused by the difference in the propagation time of light rays that take different paths down the fiber. ∙ A. modal dispersion ∙ B. microbending ∙ C. Rayleigh scattering ∙ D. chromatic dispersion

Last Answer : A. modal dispersion

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

Description : The value of the normalized frequency parameter (V) relates the core size with mode propagation. When single mode fibers propagate only the fundamental mode, what is the value of V?

Last Answer : V≤2.405.

Description : How is the term "temperature inversion" used when referring to radio waves?

Last Answer : It is a condition where layers of warm air are formed above layers of cool air.

Description : How does fog affect radio waves at frequencies above 2 gigahertz?

Last Answer : It can cause attenuation by absorbtion.

Description : How do raindrops affect radio waves?

Last Answer : They can cause attenuation by scattering.

Description : What are the two main sources of emi with which radio waves must compete?

Last Answer : Natural and man-made interference.

Description : Which layer of the atmosphere has relatively little effect on radio waves?

Last Answer : Stratosphere.

Description : What is one of the major reasons for the fading of radio waves which have been reflected from a surface?

Last Answer : Shifting in the phase relationships of the wave.

Description : The principle used in radar is the same as that of Sonar. In radar we use radio waves ; whereas in sonar we use ? A. red waves B. Infrared waves C. Ultrasonic (Answer) D. super sonic E. None of these

Last Answer : C. Ultrasonic (Answer)

Description : Scattering losses are caused by the interaction of light with density fluctuations within a fiber. What are the two scattering mechanisms called when the size of the density fluctuations is (a) greater than and (b) less than one-tenth of the operating wavelength?

Last Answer : . (a) Mie scattering; (b) Rayleigh scattering.

Description : When light strikes a piece of white paper, the light is reflected in all directions. What do we call this scattering of light?

Last Answer : Diffusion.

Description : What does Sending out a pulse of high frequency radio waves?

Last Answer : Need answer

Description : What Palindromes for Sending out a pulse of high frequency radio waves?

Last Answer : radar

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Description : The carrier waves used for the radio transmission have frequency upto A. 15 KHz B. 30 KHz C. 90 KHz D. 150 KHz

Last Answer : ANSWER: B

Description : Radar transmits short pulses of high frequency called A. Infrared waves B. Radio waves C. Ultraviolet waves D. Sound waves

Last Answer : ANSWER: B

Description : To measure the speed of an approaching car a police officer shines – (1) light waves on it (2) microwaves on it (3) radio waves on it (4) ultra high frequency waves on it

Last Answer : (3) radio waves on it Explanation: Radar, which stands for radio detection and ranging, is a system that uses reflected radio waves to detect objects and measure their distance and speed. For example, police use radar to calculate the speed of cars.

Description : Which among the following waves is used for communication by artificial satellites? (1) Micro waves (2) Radio waves (3) A. M. (4) Frequency of 1016 series

Last Answer : (1) Micro waves Explanation: For fixed (point-to-point) services, communications satellites provide a microwave radio relay technology complementary to that of communication cables. They are also used ... is extensively used for point-to-point telecommunications (i.e., non broadcast uses).

Description : As compared to sound waves the frequency of radio waves is A. lower B. higher C. equal D. may be higher or lower

Last Answer : higher

Description : Infiber optics, thesignal is_______ waves. A) light B) radio C) infrared D) very low-frequency

Last Answer : light

Description : Which wave has the highest frequency? w) microwaves x) infrared waves y) ultraviolet waves z) radio waves

Last Answer : ANSWER: Y -- ULTRAVIOLET WAVES

Description : To measure the speed of an approaching car a police officer shines (1) light waves on it (2) microwaves on it (3) radio waves on it (4) ultra high frequency waves on it

Last Answer : radio waves on it

Description : Which among the following waves is used for communication by artificial satellites ? (1) Micro waves (2) Radio waves (3) A. M. (4) Frequency of 1016 series 

Last Answer : Micro waves

Description : What is the term used to describe the basic frequency of a radio wave?

Last Answer : Fundamental frequency.

Description : What is the term used to describe a whole number multiple of the basic frequency of a radio wave?

Last Answer : Harmonic frequency or harmonics.

Description : Fibre optics work on the principle of - (1) scattering of light (2) total internal absorption (3) total internal reflection (4) option rotation

Last Answer : (3) total internal reflection Explanation: An optical fibre is a cylindrical dielectric waveguide (non-conducting waveguide) that transmits light along its axis, by the process of total internal reflection.

Description : Optical fibre works on the principle of (1) refraction (2) scattering (3) interference (4) total internal reflection

Last Answer : (4) total internal reflection Explanation: Since Torque = force x distance, to open a door easily, the handle should be fixed at the greatest distance from the hinges. If we pull with same force on a handle ... from the hinges, we will provide twice the torque, so it will be twice as easy to open.

Description : Optical fibre works on the - (1) principle of refraction (2) total internal reflection (3) scattering (4) interference

Last Answer : b) total internal reflection Explanation: Optical fiber is a cylindrical dielectric waveguide (non-conducting waveguide) that transmits light along its axis, by the process of total internal reflection.