Tropospheric mode of propagation is used in

by

1 Answer

Answer :

Tropospheric mode of propagation is used in VHF.

by

Related questions

Tropospheric scatter is used with frequencies in the

Last Answer : Tropospheric scatter is used with frequencies in the UHF.

The decimetric wave is using what method of propagation? A. Ground wave B. Space wave C. Sky wave D. Tropospheric wave

Description : The decimetric wave is using what method of propagation? A. Ground wave B. Space wave C. Sky wave D. Tropospheric wave

Last Answer : B. Space wave

Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz

Description : Tropospheric scatter is a method of sky wave propagation for which of the following frequency bands? A. 300 kHz to 3 MHz B. 3 MHz to 30 MHz C. 30 MHz to 300 MHz D. 300 MHz to 3 GHz

Last Answer : D. 300 MHz to 3 GHz

What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce

Description : What propagation condition is usually indicated when a VHF signal is received from a station over 500 miles away? A. D-layer absorption B. Faraday rotation C. Tropospheric ducting D. Moonbounce

Last Answer : C. Tropospheric ducting

What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation

Description : What propagation condition is usually indicated when a VHF signal is received from a station over 5000 miles away? A. Moonbounce B. D-layer absorption C. Tropospheric ducting D. Faraday rotation

Last Answer : C. Tropospheric ducting

Where is the tropospheric region that contributes most strongly to tropospheric scatter propagation?

Description : Where is the tropospheric region that contributes most strongly to tropospheric scatter propagation?

Last Answer : Near the mid-point between the transmitting and receiving antennas, just above the radio horizon.

Which radio frequency bands use the tropospheric scattering principle for propagation of radio waves?

Description : Which radio frequency bands use the tropospheric scattering principle for propagation of radio waves?

Last Answer : Vhf and above

Explain Tropospheric scatter propagation with sketch.

Description : Explain Tropospheric scatter propagation with sketch.

Last Answer : As the name implies, troposcatter uses the troposphere as the region that affects the radio signals being transmitted, returning them to Earth so that they can be received by the ... of "blurring" the overall received signal and this makes high speed data transmissions difficult.

When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ

Description : When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ signal then if d is the distance between two successive minima of the standing wave in the guide then   (A) d = 1.5 cm (B) d is less then 1.5 cm (C) d is greater then 1.5 cm (D) d = 3 cm

Last Answer : When a dominant mode wave guide not terminated in its characteristic impedance is excited with a 10 GHZ signal then if d is the distance between two successive minima of the standing wave in the guide then d = 1.5 cm

A rectangular waveguide is 4.2 cm by 1.85 cm. The cut-off frequency of the dominant mode through this

Description : A rectangular waveguide is 4.2 cm by 1.85 cm. The cut-off frequency of the dominant mode through this waveguide is  (a) 3.57 GHz (b) 3.75 GHz (c) 3.70 MHz (d) 3.57 MHz

Last Answer : A rectangular waveguide is 4.2 cm by 1.85 cm. The cut-off frequency of the dominant mode through this waveguide is  3.57 GHz 

(1) the action of ultraviolet rays on oxygen Explanation: The majority of tropospheric ozone formation occurs when nitrogen oxides (NOx), carbon monoxide (CO ) and volatile organic compounds (VOCs), such as xylene, react in the atmosphere in the presence of sunlight containing ultra violet rays. NOx, CO, and VOCs are called ozone precursors. CO + 2O2 + CO2 + O3

Description : (1) the action of ultraviolet rays on oxygen Explanation: The majority of tropospheric ozone formation occurs when nitrogen oxides (NOx), carbon monoxide (CO ) and volatile organic compounds (VOCs), such as xylene, ... violet rays. NOx, CO, and VOCs are called ozone precursors. CO + 2O2 + CO2 + O3

Last Answer : Water is not effective in extinguishing a fire caused by petrol because - (1) the flame is too hot for water to cool it down (2) water and petrol react chemically (3) water and petrol are ... (4) water and petrol are immiscible with each other and petrol which forms the upper layer continues to burn

____ is a term given to the region where superrefraction occurs. A. Strata B. Duct C. Isothermal region D. Tropospheric region

Description : ____ is a term given to the region where superrefraction occurs. A. Strata B. Duct C. Isothermal region D. Tropospheric region

Last Answer : B. Duct

Tropospheric scatteris usedwith frequenciesinthe followingrange: a. HF b. VHF c. UHF d. VLF

Description : Tropospheric scatteris usedwith frequenciesinthe followingrange: a. HF b. VHF c. UHF d. VLF

Last Answer : c. UHF

What is the mode of propagation of cucumber?

Description : What is the mode of propagation of cucumber?

Last Answer : Feel Free to Answer

Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM

Description : Propagation mode of microwave in a waveguide is known as _______. A. TM B. TE C. SW D. TEM

Last Answer : B. TE

ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Description : ECE Board Exam March 1996 When the transmitting and receiving antennas are in line-of-sight of each other, the mode of propagation is ________ wave. A. space or direct B. ground C. surface D. sky

Last Answer : A. space or direct

The value of the normalized frequency parameter (V) relates the core size with mode propagation. When single mode fibers propagate only the fundamental mode, what is the value of V?

Description : The value of the normalized frequency parameter (V) relates the core size with mode propagation. When single mode fibers propagate only the fundamental mode, what is the value of V?

Last Answer : V≤2.405.

The mode theory uses electromagnetic wave behavior to describe the propagation of the light along the fiber. What is a set of guided electromagnetic waves called?

Description : The mode theory uses electromagnetic wave behavior to describe the propagation of the light along the fiber. What is a set of guided electromagnetic waves called?

Last Answer : Modes of the fiber.

Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number

Description : Modal dispersion is caused by the ∙ a. Dependence of wavelength on index of refraction ∙ b. Dependence of propagation constant on index of refraction ∙ c. Dependence of the propagation constant on the wavelength ∙ d. Dependence of the propagation constant on the mode number

Last Answer : d. Dependence of the propagation constant on the mode number

Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number

Description : Material dispersion is caused by the ∙ a. Wavelength dependence of the index of refraction ∙ b. Wavelength independence of the index of refraction ∙ c. Dependence of the propagation constant on the mode number ∙ d. Independence of the propagation constant on the mode number

Last Answer : d. Independence of the propagation constant on the mode number

Troposhere mode of propagation is used in

Last Answer : Troposhere mode of propagation is used in VHF.

State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Description : State the need of signal conditioning and signal processing .List applications of instrumentation amplifier.

Last Answer : * In an instrumentation system, a transducer is used for sensing various parameters. The output of transducer is an electrical signal proportional to the physical quantity sensed such as pressure, ... monitoring and control 5) Light intensity meter 6) Measurement of flow and thermal conductivity

Which of the following statement is false? Modulation is used to:

Description : Which of the following statement is false? Modulation is used to: (1) Reduce the bandwidth used (2) Separate differing transmissions (3) Ensure that intelligence may be transmitted over long distances (4) Allow the use of practicable antennas

Last Answer : Which of the following statement is false? Modulation is used to: Reduce the bandwidth used

Indicate which one of the following is NOT an advantage of FM over AM?

Description : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Last Answer : Indicate which one of the following is NOT an advantage of FM over AM? (1) Better noise immunity is provided (2) Lower bandwidth is required (3) The transmitted power is more useful (4) Less modulating power is required 

Theoretical bandwidth requirement for FM system is:

Description : Theoretical bandwidth requirement for FM system is: (1) Same as that of the modulating signal bandwidth (2) Twice of modulating signal Bandwidth (3) Thrice as of modulating signal Bandwidth (4) Infinite 

Last Answer : Theoretical bandwidth requirement for FM system is: Infinite

The Ku frequency band used in satellite communication (for uplink and downlink) is:

Description : The Ku frequency band used in satellite communication (for uplink and downlink) is: (1) 14 GHz and 11 GHz (2) 30 GHz and 20 GHz (3) 70 GHz and 50 GHz (4) 60 GHz and 45 GHz 

Last Answer : The Ku frequency band used in satellite communication (for uplink and downlink) is: 14 GHz and 11 GHz 

The disadvantage of CDMA system is:

Description : The disadvantage of CDMA system is: (1) Higher MAI with more user count. (2) That it needs least power consumption. (3) That it needs coherent signal. (4) That it is not suitable with PSK systems 

Last Answer : The disadvantage of CDMA system is: Higher MAI with more user count. 

Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle?

Description : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

Last Answer : Which of the following is an inherent property of an optical signal and cannot be eliminated even in principle? (1) Thermal noise (2) Shot noise (3) Environmental noise (4) Background Noise

The use of non-uniform quantization leads to:

Description : The use of non-uniform quantization leads to: (1) Reduction in transmission bandwidth. (2) Increase in maximum SNR. (3) Increase in SNR for signal levels. (4) Simplification of quantization process. 

Last Answer : The use of non-uniform quantization leads to:  Increase in SNR for signal levels.

In amplitude modulation AM, if modulation index is more than 100% then:

Description : In amplitude modulation AM, if modulation index is more than 100% then: (1) Power of the wave increases. (2) Efficiency of transmission increases. (3) The wave gets distorted. (4) Bandwidth increases

Last Answer : In amplitude modulation AM, if modulation index is more than 100% then: The wave gets distorted.

In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz:

Description : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: (1) 34 and 106 (2) 52 and 88 (3) 106 and 142 (4) 34 and 142

Last Answer : In the case of a 70–MHz IF carrier for a transponder bandwidth of 36 MHz, energy must lie between MHz: 52 and 88

In T1 digital system, the frame synchronization code repeats every

Description : In T1 digital system, the frame synchronization code repeats every

Last Answer : In T1 digital system, the frame synchronization code repeats every 125 microsecond

In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the

Description : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is

Last Answer : In a PCM system the number of quantization level are 16 and the maximum signal frequency is 4 KHz the transmission bit rate is 32 Kbits/sec

Principle of Dopper effect is used in

Description : Principle of Doppler effect is used in

Last Answer : Principle of Doppler effect is used in MTI radar and CW Doppler radar

The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Description : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is

Last Answer : The capacity of a standard 4 KHz telephone channel with a 32 dB SNR is 32953 bits/second

A radio transmitter is an equipment:

Description : A radio transmitter is an equipment:

Last Answer : A radio transmitter is an equipment:  for generating modulated radio frequency waves

As the thermal noise get doubled due to the increase in a resistance the noise power get.

Description : As the thermal noise get doubled due to the increase in a resistance the noise power get.  (A) doubled (B) quadruped (C) unchanged (D) halved.

Last Answer : As the thermal noise get doubled due to the increase in a resistance the noise power get. unchanged 

A two cavity klystron tube is a

Description : A two cavity klystron tube is a  (A) velocity modulated tube (B) frequency modulated tube (C) Amplitude modulated tube (D) simple triode

Last Answer : A two cavity klystron tube is a velocity modulated tube

Ionosphere layer of earth is situated at

Description : Ionosphere layer of earth is situated at  (A) upto 18 kms from earth (B) from 18 to 70 km (C) 70 to 500 km (D) above 500 km

Last Answer : Ionosphere layer of earth is situated at 70 to 500 km

Which wave cannot exist inside wave guide

Description : Which wave cannot exist inside wave guide  (A) TE (B) TM (C) TEM (D) HE

Last Answer : Which wave cannot exist inside wave guide TEM 

The frequency range 30MHz - 300MHz is

Description : The frequency range 30MHz - 300MHz is  (A) medium frequency (B) very high frequency (C) super high frequency (D) Infrared frequency

Last Answer : The frequency range 30MHz - 300MHz is very high frequency

The most common device used for detection in radio receivers is

Description : The most common device used for detection in radio receivers is   (A)amplifier (B) triode (C) diode (D) transistor

Last Answer : The most common device used for detection in radio receivers is diode 

In commercial FM broadcasting, the maximum frequency deviation is normally

Description : In commercial FM broadcasting, the maximum frequency deviation is normally   (A) 5 KHz (B) 15 KHz (C) 75 KHz (D) 200 KHz

Last Answer : In commercial FM broadcasting, the maximum frequency deviation is normally 75 KHz

When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the

Description : When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is   (A) 0.89159% (B) 8.9159% (C) 89.159% (D) 891.59%

Last Answer : When a dipole antenna of 1/8 length has an equivalent total resistance of 1.5 Watt then the efficiency of the antenna is 89.159%

A two port network having a 6 dB loss will give

Description : A two port network having a 6 dB loss will give  (A) an output power which is one - quarter of the input power (B) an output power which is one - half of the input power (C) an output voltage which is 0.707 of the input voltage. (D) an output power which is 0.707 of the input power.

Last Answer : A two port network having a 6 dB loss will give an output power which is one - quarter of the input power

When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then

Description : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly   (A) 0.19 (B) 0.81 (C) 0.97 (D) 1.19

Last Answer : When an antenna of input resistance 73 ohm is connected to a 50-ohm line and if the losses are ignored then its efficiency will be nearly 0.81

In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor

Description : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  (a) > 100 (b) > 500 (c) > 1000 (d) > 20000

Last Answer : In a radio transmitter, the frequency of the crystal oscillator will be stable for a long time if the quality factor of the crystal resonator is  > 1000

QPSK system is superior to BPSK system because

Description : QPSK system is superior to BPSK system because  (a) its bandwidth is higher than that of BPSK System (b) interchannel interference in QPSK system is less then that in BPSK system (c) bandwidth ... is half of the bandwidth of BPSK system (d) in QPSK system inter-symbol interference is improved

Last Answer : QPSK system is superior to BPSK system because bandwidth of QPSK system is half of the bandwidth of BPSK system 

A radio receiver is placed at one corner of a table and again placed at some other corner of the same table.

Description : A radio receiver is placed at one corner of a table and again placed at some other corner of the same table. Loudspeaker output is changed because  (a) image interference is reduced (b) adjacent channel interference is increased (c) of fading (d) line of sight propagation is not utilized

Last Answer : A radio receiver is placed at one corner of a table and again placed at some other corner of the same table. Loudspeaker output is changed because of fading