If the length of a cable is doubled, its capacitance (a) becomes one-fourth (b) becomes one-half (c) becomes double (d) remains unchanged

If the length of a cable is doubled, its capacitance (a) becomes one-fourth (b) becomes one-half (c) becomes double (d) remains unchanged
by

1 Answer

Answer :

(c) becomes double
by

Related questions

A certain cable has an insulation of relative permittivity 4. If the insulation is replaced by one of relative permittivity 2, the capacitance of the cable will become (a) one half (6) double (c) four times (d) none of the above

Description : A certain cable has an insulation of relative permittivity 4. If the insulation is replaced by one of relative permittivity 2, the capacitance of the cable will become (a) one half (6) double (c) four times (d) none of the above

Last Answer : (a) one half

Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different concentrations (d) capacitance required to be introduced at different lengths to counter the effect of inductance (e) none of the above

Description : Capacitance grading of cable implies (a) use of dielectrics of different permeabilities (b) grading according to capacitance of cables per km length (c) cables using single dielectric in different ... introduced at different lengths to counter the effect of inductance (e) none of the above

Last Answer : (a) use of dielectrics of different permeabilities

A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008] (a) Remains unchanged (b) Gets doubled (c) Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Description : A journal bearing with hydrodynamic lubrication is running steadily with a certain amount of minimum film thickness. When the load and speed are doubled, how does the minimum film thickness vary? [IES-2008 ... Gets reduced to one-fourth of original value (d) Gets reduced to half of original value

Last Answer : (a) Remains unchanged

When the speed of a body is doubled, its kinetic energy becomes (a) double (b) half (c) quadruple (d) one-fourth

Description : When the speed of a body is doubled, its kinetic energy becomes (a) double (b) half (c) quadruple (d) one-fourth

Last Answer : Ans:(c)

The insulation of the cable decreases with (a) the increase in length of the insulation (b) the decrease in the length of the insulation (c) either (a) or (b) (d) none of the above

Description : The insulation of the cable decreases with (a) the increase in length of the insulation (b) the decrease in the length of the insulation (c) either (a) or (b) (d) none of the above

Last Answer : (a) the increase in length of the insulation

In capacitance grading a homogeneous dielectric is used. (a) Yes (b) No

Description : In capacitance grading a homogeneous dielectric is used. (a) Yes (b) No

Last Answer : (b) No

The disadvantage with paper as insulating material is (a) it is hygroscopic (6) it has high capacitance (c) it is an organic material (d) none of the above

Description : The disadvantage with paper as insulating material is (a) it is hygroscopic (6) it has high capacitance (c) it is an organic material (d) none of the above

Last Answer : (a) it is hygroscopic

In capacitance grading of cables we use a ______ dielectric. (a) composite (b) porous (c) homogeneous (d) hygroscopic

Description : In capacitance grading of cables we use a ______ dielectric. (a) composite (b) porous (c) homogeneous (d) hygroscopic

Last Answer : (a) composite

What is the type cable used in radiation areas?

Description : What is the type cable used in radiation areas?

Last Answer : Mineral insulated (MI) cables. 

What is the specified cable life?

Description : What is the specified cable life? 

Last Answer : 50 years.  

What are the purposes of cable trays?

Description : What are the purposes of cable trays? 

Last Answer : a. Avoid sagging of cables b. Give mechanical support 

The breakdown voltage of a cable depends on (a) presence of moisture (b) working temperature (c) time of application of the voltage (d) all of the above

Description : The breakdown voltage of a cable depends on (a) presence of moisture (b) working temperature (c) time of application of the voltage (d) all of the above

Last Answer : (d) all of the above

If a power cable and a communication cable are to run parallel the minimum distance between the two, to avoid interference, should be (a) 2 cm (b) 10 cm (c) 50 cm (d) 400 cm

Description : If a power cable and a communication cable are to run parallel the minimum distance between the two, to avoid interference, should be (a) 2 cm (b) 10 cm (c) 50 cm (d) 400 cm

Last Answer : (c) 50 cm

Is a cable is to be designed for use on 1000 kV, which insulation would you prefer ? (a) Polyvinyle chloride (b) Vulcanised rubber (c) Impregnated paper (d) Compressed SFe gas (e) none of the above

Description : Is a cable is to be designed for use on 1000 kV, which insulation would you prefer ? (a) Polyvinyle chloride (b) Vulcanised rubber (c) Impregnated paper (d) Compressed SFe gas (e) none of the above

Last Answer : (d) Compressed SFe gas

In a cable the voltage stress is maximum at (a) sheath (6) insulator (e) surface of the conductor (d) core of the conductor

Description : In a cable the voltage stress is maximum at (a) sheath (6) insulator (e) surface of the conductor (d) core of the conductor

Last Answer : (d) core of the conductor

A cable carrying alternating current has (a) hysteresis losses only (b) hysteresis and leakage losses only (c) hysteresis, leakage and copper losses only (d) hysteresis, leakage, copper and friction losses

Description : A cable carrying alternating current has (a) hysteresis losses only (b) hysteresis and leakage losses only (c) hysteresis, leakage and copper losses only (d) hysteresis, leakage, copper and friction losses

Last Answer : (b) hysteresis and leakage losses only

The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Description : The breakdown of insulation of the cable can be avoided economically by the use of (a) inter-sheaths (b) insulating materials with different dielectric constants (c) both (a) and (b) (d) none of the above

Last Answer : (c) both (a) and (b)

In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Description : In the cables, sheaths are used to (a) prevent the moisture from entering the cable (b) provide enough strength (e) provide proper insulation (d) none of the above

Last Answer : (a) prevent the moisture from entering the cable

If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be (a) 5 kV/mm (b) 10 kV/mm (a) 15 kV/mm (d) 30 kV/mm

Description : If a cable of homogeneous insulation has a maximum stress of 10 kV/mm, then the dielectric strength of insulation should be (a) 5 kV/mm (b) 10 kV/mm (a) 15 kV/mm (d) 30 kV/mm

Last Answer : (b) 10 kV/mm

The material for armouring on cable is usually (a) steel tape (b) galvanised steel wire (c) any of the above (d) none of the above

Description : The material for armouring on cable is usually (a) steel tape (b) galvanised steel wire (c) any of the above (d) none of the above

Last Answer : (c) any of the above

The surge resistance of cable is (a) 5 ohms (b) 20 ohms (c) 50 ohms (d) 100 ohms

Description : The surge resistance of cable is (a) 5 ohms (b) 20 ohms (c) 50 ohms (d) 100 ohms

Last Answer : (c) 50 ohms

In a cable, the maximum stress under operating conditions is at (a) insulation layer (b) sheath (c) armour (d) conductor surface

Description : In a cable, the maximum stress under operating conditions is at (a) insulation layer (b) sheath (c) armour (d) conductor surface

Last Answer : (d) conductor surface

The minimum dielectric stress in a cable is at (a) armour (b) bedding (c) conductor surface (d) lead sheath

Description : The minimum dielectric stress in a cable is at (a) armour (b) bedding (c) conductor surface (d) lead sheath

Last Answer : (d) lead sheath

In case of three core flexible cable the colour of the neutral is (a) blue (b) black (c) brown (d) none of the above

Description : In case of three core flexible cable the colour of the neutral is (a) blue (b) black (c) brown (d) none of the above

Last Answer : (a) blue

In a cable immediately above metallic sheath _____ is provided. (a) Earthing connection (b) Bedding (c) Armouring (d) None of the above

Description : In a cable immediately above metallic sheath _____ is provided. (a) Earthing connection (b) Bedding (c) Armouring (d) None of the above

Last Answer : (b) Bedding

The bedding on a cable consists of (a) Hessian cloth (b) Jute (c) Any of the above (d) None of the above

Description : The bedding on a cable consists of (a) Hessian cloth (b) Jute (c) Any of the above (d) None of the above

Last Answer : (c) Any of the above

Which of the following protects a cable against mechanical injury? (a) Bedding (b) Sheath (c) Armouring (d) None of the above

Description : Which of the following protects a cable against mechanical injury? (a) Bedding (b) Sheath (c) Armouring (d) None of the above

Last Answer : (c) Armouring

The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Description : The insulating material for a cable should have (a) low cost (b) high dielectric strength (c) high mechanical strength (d) all of the above

Last Answer : (d) all of the above

If the distance between the two charge bodies is halved, the force between them becomes: (a) Half (b) Four time (c) One fourth (d) Doubled

Description : If the distance between the two charge bodies is halved, the force between them becomes: (a) Half (b) Four time (c) One fourth (d) Doubled

Last Answer : (c) One fourth

A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Description : A wire of uniform area of cross-section A length L and resistance R is cut into two parts. Resistivity of each part a. remains the same b. is doubled c. is halved d. becomes zero

Last Answer : a. remains the same

A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The length of pendulum should be doubled c.The mass of the bob should be halved d.The length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Description : A particle is moving in Simple Harmonic Motion in a simple pendulum with some period of oscillation. Now in order to double the period of oscillation a.The length of pendulum should be quadrupled b.The ... length of pendulum should be reduced to one fourth e.The mass of the bob should be doubled

Last Answer : a. The length of pendulum should be quadrupled

If the number of address bits in a memory is reduced by 2 and the addressability is doubled, the size of the memory (i.e., the number of bits stored in the memory) a. doubles b. remains unchanged c. halves d. increases by 2^(address bits)/addressability

Description : If the number of address bits in a memory is reduced by 2 and the addressability is doubled, the size of the memory (i.e., the number of bits stored in the memory) a. doubles b. remains unchanged c. halves d. increases by 2^(address bits)/addressability

Last Answer : c. halves

Weight of a person at a height of 2R from the centre of the earth, where R is the radius of the earth- (1) remains same (2) becomes half (3) becomes twice (4) becomes one-fourth

Description : Weight of a person at a height of 2R from the centre of the earth, where R is the radius of the earth- (1) remains same (2) becomes half (3) becomes twice (4) becomes one-fourth

Last Answer : (4) becomes one-fourth Explanation: The gravitational force is proportional to 1/R2, where R is the distance from the centre of the Earth. So at a height of 2R from the centre of the earth, the corresponding weight would be one-fourth of the original weight.

If the length of the shank is doubled, then strain energy absorbed by shank a) Doubles b) Remains same c) Increases 4 time d) Become half

Description : If the length of the shank is doubled, then strain energy absorbed by shank a) Doubles b) Remains same c) Increases 4 time d) Become half

Last Answer : a) Doubles

If the distance between two charges is halved, then the force between them becomes (a) Half (b) Double (c) Four times (d) One-fourth

Description : If the distance between two charges is halved, then the force between them becomes (a) Half (b) Double (c) Four times (d) One-fourth

Last Answer : Ans:(c)

If the resistance of a circuit is cut in half and the applied voltage is kept constant, the current flow will be _____________. A. doubled B. quadrupled C. unchanged D. cut in half

Description : If the resistance of a circuit is cut in half and the applied voltage is kept constant, the current flow will be _____________. A. doubled B. quadrupled C. unchanged D. cut in half

Last Answer : Answer: A

When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : (4) remains the same Explanation: The poles remains same whether the magnet is cut into two equal half or more and also pole strength remains same but magnetic moment reduces due to decrease in the length of ... is called north pole (N-poled of the magnet and the other end the south pole (S-pole).

When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Description : When a bar magnet is cut into two equal halves, the pole strength of each piece – (1) becomes double (2) becomes half (3) becomes zero (4) remains the same

Last Answer : remains the same

If we double the temperature of an ideal gas, then it's average kinetic energy will be A. halved B. triple the original C. fourth times of original D. doubled

Description : If we double the temperature of an ideal gas, then it's average kinetic energy will be A. halved B. triple the original C. fourth times of original D. doubled

Last Answer : doubled

If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled

Description : If the length of a wire is halved and the cross-sectional area is doubled, the resistance will be _____________. A. quartered B. unchanged C. doubled D. quadrupled

Last Answer : Answer: A

The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Description : The length of both sides of a square parallel plate capacitor are doubled. The capacitance is: w) halved x) the same y) doubled z) quadrupled

Last Answer : ANSWER: Z -- QUADRUPLED

Why bimetallic washers provided in aluminium copper transition joints?

Description : Why bimetallic washers provided in aluminium copper transition joints?

Last Answer : To avoid galvanic corrosion failure.  

Why 1.1 kV grade cables used for 415V?

Description : Why 1.1 kV grade cables used for 415V?

Last Answer : To take care of the both earthed / unearthed systems.  

What are the types of cables used in 6.6 kV and 415 V system voltages?

Description : What are the types of cables used in 6.6 kV and 415 V system voltages? 

Last Answer : In 6.6 kV system AC (unearthed) grade having stranded aluminium conductors cables are used. Their insulation's are as follows. 1. XLPE - Crossed linked polyethylene insulation. 2. FRLS PVC - Fire ... V grade copper or aluminium stranded cables are used. Their insulations are HR PVC and FS type. 

How the required conductor size can be reduced by use of HRC fuses?

Description : How the required conductor size can be reduced by use of HRC fuses?

Last Answer : HRC fuse limits the peak amplitude of fault current. HRC fuse melts at prospective current but not allows circuit to pass their high rupturing capacity that is it’s kA. 

Why armouring done?

Description : Why armouring done?

Last Answer : For mechanical strength, protect against damage by impact of an object.  

How armours /sheaths grounded?

Description : How armours /sheaths grounded? 

Last Answer : 1 core cables -- sheaths/shields/armours grounded at one end only, other end insulated to prevent the circulating current through sheaths. 3 core cables -- grounded at both ends but not including core balance CT’s, since even small induced current causes 50N operation. 

What are the advantages of XLPE?

Description : What are the advantages of XLPE? 

Last Answer : a. Easy routing at heights b. Easy maintenance c. Large current (90 ºC) d. No sheath (no fatigue) e. No paper tape wrapping technique f. High dielectric strength g. Very little deformation ... i. Low tan delta and hence suits long routes j. Very light k. Good mechanical properties. 

What are the disadvantages of paper insulation?

Description : What are the disadvantages of paper insulation? 

Last Answer : a. Absorbs moisture. b. Cable termination/sealing problems. 

The metallic sheath may be made of lead or lead alloy or of aluminium. (a) Yes (b) No

Description : The metallic sheath may be made of lead or lead alloy or of aluminium. (a) Yes (b) No

Last Answer : (b) No