How much of the stripped length of a conductor should be  tinned?

1 Answer

Answer :

One-half the stripped length.

Related questions

Description : Why should wire be stripped 1/32 inch longer than the depth of the solder barrel?

Last Answer : To prevent burning the insulation during the soldering process and to allow the wire to flex easier at a stress point.

Description : Are tinned prunes kosher?

Last Answer : Not sure I understand your question, but as are many foods, some prunes are kosher, some not. Here are some that are kosher_

Description : What country does tinned fruit come from?

Last Answer : Europe

Description : A coil is wound with 400 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 4.8 amps B. 7.06 amps C. 10.65 amps D. 11.27 amps

Last Answer : Answer: B

Description : A coil is wound with 200 feet of No. 16 tinned copper wire and connected to a 12 volt battery. What is the current if the resistance per 1000 feet of No. 16 tinned copper wire is 4.26 ohms? A. 1.14 amps B. 7.04 amps C. 10.22 amps D. 14.08 amps

Last Answer : Answer: D

Description : Why Is The Bearing Tinned Before Refilling?

Last Answer : While removing the damaged lining it helps to melt the lining at low temperature and it helps to spread over the molten metal on the bearing surface.

Description : Why tinned containers are used for storage of food?

Last Answer : Tinned containers preferred over galvanized containers for food storage because Tin metal is less active and have corrosion resistance. It is nontoxic and does not react with food stuff and does ... iron hence it reacts with weak organic acids present in food stuffs to produce poisonous compound.

Description : How can I remove 4 stripped screws from computer panel without damaging computer, including threading?

Last Answer : Go to the hardware store and get a reverse-tap drill bit. It’ll work like a charm.

Description : How can I remove a pedal from my bike when the bolt is stripped?

Last Answer : Are you aware that the left pedal is threaded in the opposite direction, and loosens by turning clockwise?

Description : If a billionaire like Musk or Bezos had all their net worth and power/fame stripped (no one knows who they are) would they be able to regain their wealth with their knowledge and skills?

Last Answer : Likely not. They could become successful, but I'd bet just about anything that if you took any billionaire down to complete zero they could never get back. Especially since most billionaires start out miles ahead of complete zero from wealthy and well connected/powerful families.

Description : My hollies are being stripped of their leaves, Help!!!!

Last Answer : Need Answer

Description : Pruned Red Bud tree and in doing so stripped the bark on two branches 3", should I put something on the wound?

Last Answer : It's recommended that you put nothing on the cut end/bark. The tree will seal itself.

Description : How do I use the stripped camera of a broken Android phone as a webcam for my PC?

Last Answer : If you're on a PC running Windows and you use an Android phone, one of the easiest (and wireless) methods is to use an app called DroidCam. Download the app from the Google Play Store on your phone. ... to be running Android 5.0 or higher. To check, go to Settings > About Phone > Android version.)

Description : What two names for the process by which soil and rock are stripped from the Earths surface to expose underlying coal?

Last Answer : Surface mining and Strip mining :)

Description : What IS A STRIPPED CHRISTMAS TREE?

Last Answer : Stripped means to remove. Therefore, a stripped Christmas tree is when all the Christmas decorations have been removed. It is usually the time when a real Christmas tree (not an artificial one) begins to shed the needles and make a mess of the carpet - time to throw it out.

Description : What type of tool should I use to get out a stripped screw?

Last Answer : You can purchase a screw extractor at a hardware store. This bit fits on the end of the drill and grabs hold of the stripped screw head and removes it quite easily. You could also drill through ... the screw head comes off, the screw shaft can be removed with a pair of pliers. [email protected]

Description : What tool will help me remove screw with stripped heads?

Last Answer : You need a screw extractor,but there are several different systems.Basically you drive something into the screwhead which grabs hold of it and allows you to turn it.

Description : In stripping section of continuous distillation column, the (A) Liquid is stripped of high boiler (B) Liquid is enriched with high boiler (C) Vapour is stripped of low boiler (D) None of these

Last Answer : (B) Liquid is enriched with high boiler

Description : In rectifying section of a continuous distillation column, the (A) Vapour is enriched with low boilers (B) Vapour is enriched with high boilers (C) Liquid is stripped of high boilers (D) None of these

Last Answer : (B) Vapour is enriched with high boilers

Description : Coke oven gas is stripped of its H2S and mercaptans content by (A) Absorption in wash oil (B) Adsorption on bog iron bed (C) Bubbling it through dilute sulphuric acid (D) Adsorption on silica gel

Last Answer : (B) Adsorption on bog iron bed

Description : 2018, Amnesty International stripped _____ of the ambassador of conscience award given in 2009

Last Answer : Aung San Suu ky

Description : is a individual working element such as a disk or shovel a) tool b) machine c) stripped d) rotary

Last Answer : tool

Description : How to Remove a Stripped Screw

Last Answer : How to Remove a Stripped Screw For many mechanics, carpenters, and electricians, a stripped screw is an annoyance that makes maintenance and assembly tasks more difficult than they should be. A really old ... remove stripped screws in no time at all, so that you can replace them with new screws.

Description : A hardened firewall host on an Intranet is a. a software which runs in any of the computers in the intranet b. a software which runs on a special reserved computer on the intranet c. a stripped down computer connected to the intranet d. a mainframe connected to the intranet to ensure security

Last Answer : b. a software which runs on a special reserved computer on the intranet 

Description : Javascript and Java has similar name because ........... is/are true. (a) Javascripts syntax is loosely based on Java's syntax (b) Javascript is stripped down version of Java (c) Java and Javascript are originated from Island of Java ... only (B) (a), (b) and (c) (C) (a) and (b) (D) (a) and (c)

Last Answer : Answer: A

Description : For an electric field to exist at the surface of a conductor, the field must have what angular relationship to the conductor?

Last Answer : The field must be perpendicular to the conductors.

Description : What causes the current-carrying area at the center conductor of a coaxial line to be restricted to a small layer at the surface?

Last Answer : Skin effect.

Description : What is the purpose of the green conductor in a power tool or electrical appliance cable?

Last Answer : To prevent electrical shock to the operator in case there is an electrical short to the frame of the appliance or too.

Description : When would silver be used as a conductor in preference to copper?

Last Answer : When the need for conductivity is great enough to justify the additional expense.

Description : What determines whether a substance is a conductor or an insulator?

Last Answer : The number of valence electrons.

Description : An emf is generated in a conductor when the conductor is cut by what type of field?

Last Answer : Magnetic field.

Description : Compare the resistance of a conductor to that of an insulator.

Last Answer : Conductors have a very low resistance and insulators have a resistance that is so great that, for all practical purposes, they are nonconductors.

Description : State four advantages of copper over aluminum as a conductor.

Last Answer : It has higher conductivity, it is more ductile, it has relatively high tensile strength, and it can be easily soldered.

Description : State why it is important for you to consider the ambient (surrounding) temperature of a conductor when selecting wire size.

Last Answer : The heat surrounding the conductor is an important part of total conductor heating.

Description : List the three factors used to calculate resistance of a particular conductor in ohms.

Last Answer : Length, cross-sectional area, and specific resistance of a unit volume of the substance from which the conductor is made

Description : Define a square mil as it relates to a square conductor

Last Answer : The cross-sectional area of a square conductor with a side of 1 mil.

Description : Calculate the diameter in MILS of a conductor that has a diameter of 0.375 inch.

Last Answer : 375 mils (move the decimal three places to the right).

Description : Is it considered safe for a person to touch any energized low-voltage conductor with the bare hand?

Last Answer : NEVER! All energized electric circuits should be considered potentially dangerous.

Description : If the insulation of a conductor was being measured in figure1-51 (A), would the reading indicate a good insulation?

Last Answer : Yes.

Description : What is the procedure for using a megger to check the insulation of a conductor?

Last Answer : Connect one lead to the insulation and one lead to the conductor. Turn the handcrank until it starts to slip. Note the reading

Description : How would the compass react if the alternating current through the conductor was a high frequency?

Last Answer : The compass needle would vibrate rapidly around the zero current point ac meter (magnetic north).

Description : How would a compass react when placed close to a conductor carrying alternating current at a low frequency?

Last Answer : The compass needle would swing back and forth as the current changed from positive to negative.

Description : If the amount of current in the conductor changes, what happens to the magnetic field around the conductor?

Last Answer : If the current increases the magnetic field increases; if the current decreases the magnetic field decreases.

Description : How does a compass react when placed close to a current carrying conductor?

Last Answer : The compass needle swings away from magnetic north and aligns itself with the magnetic field around the conductor

Description : What structurally large, low-resistance conductor is connected in parallel with the meter movement to prevent damage?

Last Answer : Shunt.

Description : How does the resistance of the conductor depend on the length and cross section of the conductor ?

Last Answer : Conductor resistance is proportional to the length of the conductor and disproportionate to the cross section .

Description : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Last Answer : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2 ... the material is `2.0xx10^(-8)(Omega)m`.

Description : A conductor of length 5 cm is moved paralllel to itself with a speed of `2m//s`, perpendicular to a uniform magnetic field of `10^(-3) Wb//m^(2).` the

Last Answer : A conductor of length 5 cm is moved paralllel to itself with a speed of `2m//s`, perpendicular to a uniform ... `1xx10^(-4)V` D. `2xx10^(-4) V`

Description : A circular conductor of uniform resistance per unit length, is connected to a battery of 4 V. The total resistance of the conductor is `4omega`. The n

Last Answer : A circular conductor of uniform resistance per unit length, is connected to a battery of 4 V. The total resistance of ... ))/(3)` C. `2mu_(0)` D. zero

Description : The resistance of a conductor is inversely proportional to its - (1) temperature (2) resistivity (3) area of cross section (4) length

Last Answer : (3) area of cross section Explanation: The resistance of a current carrying conductor is inversely proportional to the area of cross section of the conductor. This is because the resistance occurs due to the collision of electrons/charged particles.