Type of power-line frequency meter composed of vibrating iron reed placed in alternating magnetic field

Type of power-line frequency meter composed of vibrating iron reed placed in alternating
magnetic field
by

1 Answer

Answer :

Vibrating Reed Type
by

Related questions

A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Description : A useful instrument for checking A.C. motor performance by measuring possible unbalanced currents is the _____________. A. hand or battery-operated megger B. vibrating-reed frequency meter C. hook-on voltmeter-ammeter D. D'Arsonval iron-vane probe

Last Answer : Answer: C

Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Description : Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Last Answer : magnetic type

In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of?

Last Answer : In a vibrating reed frequency meter the natural frequencies of two adjacent reeds have a difference of 0.5 Hz.

The RPM of an AC generator can be measured with a/an _____________. A. ammeter B. voltmeter C. vibrating reed meter D. synchroscope

Description : The RPM of an AC generator can be measured with a/an _____________. A. ammeter B. voltmeter C. vibrating reed meter D. synchroscope

Last Answer : Answer: C

An electric tachometer receives the engine speed signal from a _______________. A. small generator mounted on the engine B. bimetallic sensing device C. stroboscopic sensing device D. vibrating reed meter generating a voltage proportionate to engine speed

Description : An electric tachometer receives the engine speed signal from a _______________. A. small generator mounted on the engine B. bimetallic sensing device C. stroboscopic sensing device D. vibrating reed meter generating a voltage proportionate to engine speed

Last Answer : Answer: A

A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Description : A galvanometer with 20 ohms coil resistence has a full-scale deflection of 10 mA. A 0.02 ohm is placed across the meter to increase its rating capacity. What is the new full scale current for the meter?

Last Answer : False.

An electrodynamic meter used t measure power

Description : An electrodynamic meter used t measure power

Last Answer : wattmeter

Component 'D' in section 'I' shown in the illustration represents a ____________. EL-0093 A. selector switch B. vibrating reed indicator C. junction box D. ring counter

Description : Component 'D' in section 'I' shown in the illustration represents a ____________. EL-0093 A. selector switch B. vibrating reed indicator C. junction box D. ring counter

Last Answer : Answer: A

A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Description : A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Last Answer : DMM

What is the most common type of meter movement?

Description : What is the most common type of meter movement?

Last Answer : D' Arsonval

What type of instrument is the watt-hour meter?

Description : What type of instrument is the watt-hour meter?

Last Answer : an integrating

The only use of voltage senstive meter movement

Description : The only use of voltage senstive meter movement

Last Answer : very low voltage measurement

When the meter is unsufficiently damped, it is considered as ___

Description : When the meter is unsufficiently damped, it is considered as ___

Last Answer : underdamped

It is the reciprocal of the full-scale current of a meter

Description : It is the reciprocal of the full-scale current of a meter

Last Answer : sensitivity

Calculate the series resistance needed to convert a D' Arsonval meter with FSD of 100uA and a meter resistance of 1kohm to a voltmeter with 10V FSD.

Description : Calculate the series resistance needed to convert a D' Arsonval meter with FSD of 100uA and a meter resistance of 1kohm to a voltmeter with 10V FSD.

Last Answer : Rs=10V/100uA - 1kohm = 99kohm

A meter when __ will become insensitive to small signals

Description : A meter when __ will become insensitive to small signals

Last Answer : overdamped

Insulation resistance is measured by which meter?

Description : Insulation resistance is measured by which meter?

Last Answer : megger

A meter has a full-scale current of 50uA, what is its sensitivity?

Description : A meter has a full-scale current of 50uA, what is its sensitivity?

Last Answer : Is=1/50uA=20kohm/V

Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Description : Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Last Answer : instrument errors

What is that meter that depends for its operation on the forces attraction and repulsion

Description : What is that meter that depends for its operation on the forces attraction and repulsion

Last Answer : electrostatic instrument

A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Description : A tunable RF instrument, which, by means of a sharp dip of an indicating meter, indicates resonance with an external circuit under test

Last Answer : dip meter

In meter movement, how do oyu prevent the meter from oscillating and overswing?

Description : In meter movement, how do oyu prevent the meter from oscillating and overswing?

Last Answer : by damping

Calculate the shunt resistance needed to increase the FSD of an ammeter 5 times if the meter resistance is 1kohm

Description : Calculate the shunt resistance needed to increase the FSD of an ammeter 5 times if the meter resistance is 1kohm

Last Answer : 250ohms

___ meter is the most sensitive

Description : ___ meter is the most sensitive

Last Answer : 1uA

An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Description : An ammeter has a full-scale deflection current of 100mA. If the same ammeter is used to measure a full-scale current of 1.0ampere, what is the value of the shunt resistor in ohms if the voltage across the meter is 9.0 volts?

Last Answer : 10 ohms

What sensor provides a change of resistance with typical power range of 1uW to 10mW and with maximum frequency greater than 100GHz

Description : What sensor provides a change of resistance with typical power range of 1uW to 10mW and with maximum frequency greater than 100GHz

Last Answer : thermistor sensor

A common technique for measuring power at high frequency is to ______

Description : A common technique for measuring power at high frequency is to ______

Last Answer : employ a sensing element that converts the RF power to a measureable dc or low-frequency signal

A ____ operates on the magnetic attraction-repulsion principles.

Description : A ____ operates on the magnetic attraction-repulsion principles.

Last Answer : milliameter

What is that instrument used for measuring the strength and direction of magnetic fields?

Description : What is that instrument used for measuring the strength and direction of magnetic fields?

Last Answer : magnetometer

What do you call of an instrument that depends for its operation on the reaction between magnetic flux set up by currents in fixed windings and other currents set up by electromagnet induction in movable conducting parts?

Description : What do you call of an instrument that depends for its operation on the reaction between magnetic flux set up by currents in fixed windings and other currents set up by electromagnet induction in movable conducting parts?

Last Answer : induction instrument

What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Description : What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Last Answer : Wein Bridge

What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Description : What do you call of the frequency-sensitive bridge in which two adjacent arms are resistances and other are RC combinations?

Last Answer : Wein Bridge

What ammeter is mostly used in measuring high frequency currents?

Description : What ammeter is mostly used in measuring high frequency currents?

Last Answer : thermocouple

___ ammeter is used to measure high-frequency currents.

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

The frequency of rotation in some rotating machinery can be measured by a

Description : The frequency of rotation in some rotating machinery can be measured by a

Last Answer : stroboscope

A device or instrument, which delivers signals of precise frequency and amplitude, usually over a wide range

Description : A device or instrument, which delivers signals of precise frequency and amplitude, usually over a wide range

Last Answer : signal generators

Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Description : Refers to an ac bridge for measuring the inductance and Q of an inductor in terms of resistance, frequency and a standard capacitance.

Last Answer : hay bridge

Tank-circuit frequency can be measured by

Description : Tank-circuit frequency can be measured by

Last Answer : grid dip meter

How would a compass react when placed close to a conductor carrying alternating current at a low frequency?

Description : How would a compass react when placed close to a conductor carrying alternating current at a low frequency?

Last Answer : The compass needle would swing back and forth as the current changed from positive to negative.

How will you commission D.P. transmitter in field in pressurized vessel.

Description : How will you commission D.P. transmitter in field in pressurized vessel.

Last Answer : ١. Close both the isolation valves, Vent the H.P. side. ٢. Fill it with the sealing liquid. ٣. Open the L.P. side vent valve. ٤. Adjust zero with suppression spring. ٥. Close the L.P. side vent valve. ٦. Open both the isolation valves.  

How will you calibrate a leveltrol in the field ?

Description : How will you calibrate a leveltrol in the field ?

Last Answer : Calculation # 1 If the calibrating liquid is water: Process Liquid Density / 1* Displacer height = mm of H2O. Calculation # 2 If the calibrating liquid is Other liquid: Process Liquid Density / ... gravity or span adjustment ( Electronic Level ). 6. Fill it up to 50 %, check linearity.  

What is the device, which depends on the action of a movalbe permanent magnet, in aligning itself in the resultant field produced by a fixed permanent magnet or current- carrying coils whose axes are displaced by a fixed angle?

Description : What is the device, which depends on the action of a movalbe permanent magnet, in aligning itself in the resultant field produced by a fixed permanent magnet or current- carrying coils whose axes are displaced by a fixed angle?

Last Answer : moving-magnet instrument

Moving-iron instrument has a/an scale

Description : Moving-iron instrument has a/an scale

Last Answer : squared

To increase the measuring capability of a moving-iron ac ammeter, a __ should be used.

Description : To increase the measuring capability of a moving-iron ac ammeter, a __ should be used.

Last Answer : different number of turns of coils

Pick out the correct statement: (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products (B) The operating cost of shaking screen is more than that of a vibrating screen (C) Screen capacity does not depend upon the specific gravity of the minerals (D) Asphalt is best crushed using toothed roll crusher

Description : Pick out the correct statement: (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products (B) The operating cost of ... upon the specific gravity of the minerals (D) Asphalt is best crushed using toothed roll crusher

Last Answer : (A) Removal of iron from ceramic material is necessitated (by magnetic separation method) so as to avoid discolouration of ceramic products

How will you check zero of a level D.P. transmitter while is line ?

Description : How will you check zero of a level D.P. transmitter while is line ? 

Last Answer : ١. Close both the isolation valves. ٢. Open the vent valve on L.P. leg and H.P. leg drain. ٣. Check and adjust zero if necessary. 

What will happen if the displacer has a hole in it while in line ?

Description : What will happen if the displacer has a hole in it while in line ?  

Last Answer : The output will be minimum. 

What will happen if the displacer has fallen down while in line ?

Description : What will happen if the displacer has fallen down while in line ?

Last Answer : The output will be maximum. 

How do you identify the H. P. side or inlet of an orifice plate in line?

Description : How do you identify the H. P. side or inlet of an orifice plate in line?

Last Answer : The marking is always done H. P. side of the orifice tab which gives an indication of the H. P. side.

How do you identify an orifice in the pipe line?

Description : How do you identify an orifice in the pipe line?

Last Answer : An orifice tab is welded on the orifice plate which extends outer of the line giving an indication of the orifice plate.