Induction type instruments are mostly used as ___

1 Answer

Answer :

watt-hour meter

Related questions

Description : Current range extension in moving coil instruments can be achieved by placing a ___ in shunt with the instrument.

Last Answer : low resistance resistor

Description : ___ has a series RC combination in one arm and a parallel RC combination in the adjoining arm and used as a notch filter in harmonic distortion analyzer.

Last Answer : wein bridge

Description : When the capacitors of a Wein Bridge are replaced by inductors, the bridge becomes ___

Last Answer : Wein Inductance Bridge

Description : For amplitude measurements, ___ scale is calibrated in either volts per centimeter (V/cm), or millivolts per centimeter (mV/cm)

Last Answer : vertical

Description : When the meter is unsufficiently damped, it is considered as ___

Last Answer : underdamped

Description : ___ ammeter is used to measure high-frequency currents.

Last Answer : thermocouple

Description : A wheatstone bridge is balanced if ___

Last Answer : the ratio of resistors on one side of the bridge equals the ratio of resistors on the other side

Description : In a moving coil ammeter, a ___ is connected in series with the coil to compensate for temperature variations

Last Answer : swamping resistors

Description : In VTVMS, ___ refers to the smallest signal that can be reliably measured

Last Answer : sensitivity

Description : The time interval that a waveform is high (or low) is the ___ of the signal.

Last Answer : pulse width

Description : The time interval between pulses is called ___

Last Answer : pulse delay

Description : A measure of consistency or repeatability of measurements is called. ___

Last Answer : precision

Description : ___ is used for measuring medium Q coils

Last Answer : Maxwell Bridge

Description : Error in voltmeter is due to ___

Last Answer : loading

Description : In an oscilloscope, ___ adjusts the brightness of the spot by chaning the current on the control grid.

Last Answer : intensity control

Description : For time measurements, ___ scale of the scope is used.

Last Answer : horizontal

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

Description : High sensitive DC voltmeter provides accurate reading when measuring ___ circuits.

Last Answer : high resistance

Description : For a dynamometer to be able to measure high current, a ___ should be used.

Last Answer : current transformer

Description : The ___ provides the visual display showing the form of the signal applied as a waveform on the front screen of a cathode ray oscilloscope

Last Answer : CRT

Description : ___ meter is the most sensitive

Last Answer : 1uA

Description : Dynamometers are mostly used

Last Answer : wattmeter

Description : Dynamometers are mostly used as

Last Answer : wattmeter

Description : What ammeter is mostly used in measuring high frequency currents?

Last Answer : thermocouple

Description : Electrostatic instruments are exclusively used as

Last Answer : voltmeters

Description : Electrostatic instruments are exclusively used as

Last Answer : voltmeters

Description : Which electrical instruments below is the most sensitive?

Last Answer : PMMC

Description : Attraction and repulsion instruments are considered

Last Answer : moving iron instruments

Description : Errors due to frictions of the meter movement, incorrect spring tension, improper calibration or faulty instruments:

Last Answer : instrument errors

Description : A moving system force in an analog instruments which causes the moving system to deflect from its zero position.

Last Answer : deflecting force

Description : A moving system force in analog instruments which ensures that the deflection of the pointer for a given value of measured quantity always has the same value

Last Answer : controlling force

Description : Which of the following forces does not act on the moving systems of analog instruments?

Last Answer : an electrostatic force

Description : What do you call of an instrument that depends for its operation on the reaction between magnetic flux set up by currents in fixed windings and other currents set up by electromagnet induction in movable conducting parts?

Last Answer : induction instrument

Description : What type of sensing element would you use to measure very low temperature ?

Last Answer : The sensing element used for measuring very low temperature is R. T. D. ( Resistance Temperature Detector )

Description : Type of power-line frequency meter composed of vibrating iron reed placed in alternating magnetic field

Last Answer : Vibrating Reed Type

Description : Type of waveform generated by the sweep generator of the CRT

Last Answer : sawtooth

Description : A type of photometer used to measure reflection.

Last Answer : reflectometer

Description : Type of power-line frequency meter device utilizing a principle of balancing an indicator needle at center of a scale using magnetic fields opposing each other.

Last Answer : magnetic type

Description : Generally, oscilloscope uses what type of deflection?

Last Answer : electrostatic deflection

Description : A type of meter that gives a precise reading of voltage, current or resistance where there is the generation of samples at the input and then feeds it to a digital read-out.

Last Answer : DMM

Description : Which is the best type of ammeter movement?

Last Answer : D'Arsonval

Description : What is the most common type of meter movement?

Last Answer : D' Arsonval

Description : The zero-adjust control in an analog type ohmmeter is used to

Last Answer : compensate for the differing internal battery voltage

Description : Dynamometer type instrument can be used for

Last Answer : both dc and ac works

Description : What type of instrument is the watt-hour meter?

Last Answer : an integrating

Description : What is a filter used for ?

Last Answer : The half wave and full wave signals are pulsating D . C . voltages. The use of such voltages is limited to charging batteries, running D. C. motors, and a few other applications. What we really ... voltage from a battery. To get a constant voltage from this, we can use a capacitor input filter. 

Description : What is Zener Diode ? What is a voltage Regulator ?

Last Answer : The breakdown region of a p n diode can be made very sharp and almost vertical Diodes with almost vertical breakdown region are known as Zever Diodes. A Zener diodes operating in the breakdown ... VOLTAGE REGULATOR : The output remains constant despite changes in input voltage due to Zever effect.  

Description : What is transistor ? What are the different types ?

Last Answer : A transistor is a three lagged semi conductor device. Basically a transistor means (transfer - resister). Whether the transistor is pnp or npn it resembles two diodes (back to back). The one of the left ... transistor : Emitter - Base - Forward Bias. Collector - Base - Reverse Bias. 

Description : What is CB, CE and CC configuration ?

Last Answer : Buffer : A device or a circuit used to isolate two pt'ne circuits or stages. The emitter follows is a example of buffer. Alpha = IC / IE Beta = IC / IB

Description : How will you test a transistor with a multimeter. ?

Last Answer : 1. Emitter +ve of meter and Base -ve output = Low resistance 2. Emitter -ve of meter and base +ve output = High resistance. 3. Collector +ve and Base -ve output = Low. 4. Collector -ve and base +ve output = High. Emitter : Collector = High Resistance. PNP : Opposite Results.