The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes (A) With the horizontal (B) With the vertical (C) With the perpendicular to the inclined plane of the soil (D) None of these

The angle of repose of a soil is the maximum angle which the outer face of the soil mass makes
(A) With the horizontal
(B) With the vertical
(C) With the perpendicular to the inclined plane of the soil
(D) None of these
by

1 Answer

Answer :

Answer: Option A
by

Related questions

The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of (A) Friction (B) Limiting friction (C) Repose (D) Kinematic friction

Description : The angle which an inclined plane makes with the horizontal when a body placed on it is about to move down is known as angle of (A) Friction (B) Limiting friction (C) Repose (D) Kinematic friction

Last Answer : (C) Repose

A plane inclined at an angle to the horizontal at which the soil is expected to stay in the absence of any lateral support, is known as (A) Natural slope line (B) Repose line (C) The line (D) All the above

Description : A plane inclined at an angle to the horizontal at which the soil is expected to stay in the absence of any lateral support, is known as (A) Natural slope line (B) Repose line (C) The line (D) All the above

Last Answer : Answer: Option D

A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of internal friction for the soil are respectively (A) 0.5 N/mm² and 30° (B) 0.05 N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Description : A cylindrical specimen of saturated soil failed under an axial vertical stress of 100kN/m² when it was laterally unconfmed. The failure plane was inclined to the horizontal plane at an angle of 45°. The values of cohesion and angle of ... N/mm² and 0° (C) 0.2 N/mm² and 0° (D) 0.05 N/mm² and 45°

Last Answer : Answer: Option B

The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Description : The angle which an inclined surface makes with the horizontal when a body placed on it is on the point moving down is known as a.Angle of friction b.Angle of limiting friction c.Angle of inclination d.Angle of repose e.None of the above

Last Answer : d. Angle of repose

Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Description : Rankine's theory of active earth pressure assumes (A) Soil mass is homogeneous, dry and cohesionless (B) Ground surface is a plane which may be horizontal or inclined (C) Back of the wall is vertical and smooth (D) All the above

Last Answer : Answer: Option D

The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Description : The direction of projection for the range of a projectile to be maximum on an inclined plane having angle of inclination 30? to the horizontal, whould be a.45? with horizontal b.30? with vertical c.30? with horizontal d.60? with inclined plane e.45? with inclined plane

Last Answer : b. 30? with vertical

The angle that Coulomb's failure envelope makes with the horizontal is called (A) Cohesion (B) Angle of internal friction (C) Angle of repose (D) None of the above

Description : The angle that Coulomb's failure envelope makes with the horizontal is called (A) Cohesion (B) Angle of internal friction (C) Angle of repose (D) None of the above

Last Answer : Answer: Option A

If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Description : If is the angle of repose of soil of weight w kg/m3 , the horizontal pressure p at a depth of h metres per metre length of wall, is (A) wh × [(1 - sin )/(1 + )] (B) (wh/2) × [(1 - sin )/(1 + )] (C) wh - sin )/(1 + )] (D) wh )/(1 - )

Last Answer : Answer: Option A

The total pressure force on a plane area is equal to the area multiplied by the intensity of pressure at the Centroid, if (A) The area is horizontal (B) The area is vertical (C) The area is inclined (D) All of the above

Description : The total pressure force on a plane area is equal to the area multiplied by the intensity of pressure at the Centroid, if (A) The area is horizontal (B) The area is vertical (C) The area is inclined (D) All of the above

Last Answer : Answer: Option D

A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant active earth pressure will act at a distance of 2 m above the base and inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Description : A retaining wall 6m high supports a backfill with a surcharge angle of 10°. The back of the wall is inclined to the vertical at a positive batter angle of 5°. If the angle of wall friction is 7°, then the resultant ... inclined to the horizontal at an angle of (A) 7° (B) 10° (C) 12° (D) 17

Last Answer : (C) 12°

An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Description : An open vessel of water is accelerated up an inclined plane. The free water surface will (A) Be horizontal (B) Make an angle in direction of inclination of inclined plane (C) Make an angle in opposite direction to inclination of inclined plane (D) Any one of above is possible

Last Answer : Answer: Option C

While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the same position in its tube, it indicates (A) The rotation axis is vertical (B) The trunnion axis is horizontal (C) The line of collimation is perpendicular to vertical axis (D) None of the above

Description : While rotating the theodolite in the horizontal plane, the bubble of the bubble tube takes up the  same position in its tube, it indicates  (A) The rotation axis is vertical  (B) The trunnion ... (C) The line of collimation is perpendicular to vertical axis  (D) None of the above

Last Answer : (A) The rotation axis is vertical

In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Last Answer : (B) Minor principal stress is vertical

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C

Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Description : Terzaghi's analysis assumes: (A) Soil is homogeneous and isotropic (B) Elastic zone has straight boundaries inclined at = to the horizontal and plastic zones fully developed (C) Failure zones do not extend above the horizontal plane through the base of the footing (D) All the above

Last Answer : Answer: Option D

The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the soil is in a passive state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Description : The major principal stress in an element of cohesion-less soil within the backfill of a retaining wall is (A) Vertical if the soil is in an active state of plastic equilibrium (B) Vertical if the ... state of plastic equilibrium (C) Inclined at 45° to the vertical plane (D) None of the above

Last Answer : Answer: Option A

The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Description : The maximum shear stress occurs on the filament which makes an angle with the horizontal plane equal to (A) 30° (B) 45° (C) 60° (D) 90

Last Answer : (B) 45°

The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above

Description : The work done in sliding a block of weight of 50 kg up a plane inclined at an angle of 30? to the horizontal so that the block is lifted through 1 m ( a.More than 50 kgm b.50 kgm c.Less than 5 kgm d.15 kgm only e.None of the above

Last Answer : a. More than 50 kgm

A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Description : A body of weight W is resting at a plane inclined at 30? to the horizontal. It is attached to a string making an angle of 60? with horizontal. If the angle of friction be 30? the tension in the string would be a.Zero b.W c.W/2 d.2W e.None of the above

Last Answer : c. W/2

The electric field lines in a plane perpendicular to the earth’s surface. A. Elliptical polarization B. Circular polarization C. Horizontal polarization D. Vertical polarization

Description : The electric field lines in a plane perpendicular to the earth’s surface. A. Elliptical polarization B. Circular polarization C. Horizontal polarization D. Vertical polarization

Last Answer : D. Vertical polarization

The change of moisture content of soils, changes the (A) Value of the angle of repose (B) Amount of compaction required (C) Cohesive strength of soil (D) All the above

Description : The change of moisture content of soils, changes the (A) Value of the angle of repose (B) Amount of compaction required (C) Cohesive strength of soil (D) All the above

Last Answer : Answer: Option D

The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Description : The stem of a cantilever retaining wall which retains earth level with top is 6 m. If the angle of repose and weight of the soil per cubic metre are 30° and 2000 kg respectively, the effective width of the stem at the bottom, is (A) 51.5 (B) 52.5 (C) 53.5 (D) 54.5

Last Answer : Answer: Option C

In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Description : In the triaxial compression test, the application of additional axial stress (i.e. deviator stress) on the soil specimen produces shear stress on (A) Horizontal plane only (B) Vertical plane only (C) Both horizontal and vertical planes (D) All planes except horizontal and vertical planes

Last Answer : (D) All planes except horizontal and vertical planes

For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location

Description : For measuring flow by a Venturimeter, if should be installed in (A) Vertical line (B) Horizontal line (C) Inclined line with flow downward (D) In any direction and in any location

Last Answer : Answer: Option D

On a grading curve, the gap grading is represented by (A) A horizontal line (B) A vertical line (C) N.W. inclined line (D) N.E. inclined line

Description : On a grading curve, the gap grading is represented by (A) A horizontal line (B) A vertical line (C) N.W. inclined line (D) N.E. inclined line

Last Answer : Answer: Option A

If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Description : If the plane table is not horizontal in a direction at right angles to the alidade, the line of sight is parallel to the fiducial edge only for (A) Horizontal sights (B) Inclined sights upward (C) Inclined sight downward (D) None of these

Last Answer : (A) Horizontal sights

Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Description : Contours of different elevations may cross each other only in the case of (A) An overhanging cliff (B) A vertical cliff (C) A saddle (D) An inclined plane

Last Answer : (A) An overhanging cliff

Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of the vertical face of a guay wall, is called fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Description : Pick up the correct statement from the following: (A) The artificial barrier constructed to enclose "n area for safe anchorage, is called break water (B) The smoothened surface at the top end of ... fending (C) The effective berthing lengths of inclined guays can be adjusted (D) All the above

Last Answer : (D) All the above

A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Description : A projectile is fired at an angle to the vertical. Its horizontal range will be maximum when is (A) 0° (B) 30° (C) 45° (D) 60°

Last Answer : (C) 45°

The range of spread from the wall base to outer edge of a brick work foundation does not exceed (A) 1/2 horizontal to 1 vertical (B) 2/3 horizontal to 1 vertical (C) 1 horizontal to 1 vertical (D) 2 horizontals to 1 vertical

Description : The range of spread from the wall base to outer edge of a brick work foundation does not exceed (A) 1/2 horizontal to 1 vertical (B) 2/3 horizontal to 1 vertical (C) 1 horizontal to 1 vertical (D) 2 horizontals to 1 vertical

Last Answer : Answer: Option C

A light ray is incident on a plane mirror placed in a horizontal plane, making an angle of `30^(@)` with the vertical, then the angle between the refl

Description : A light ray is incident on a plane mirror placed in a horizontal plane, making an angle of `30^(@)` with the vertical, then the angle between the refl

Last Answer : A light ray is incident on a plane mirror placed in a horizontal plane, making an angle of `30^(@)` with the vertical, ... @)` C. `90^(@)` D. `30^(@)`

A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of maximum compession of spring, neglecting friction to that while considering friction would be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Description : A block of weight 20 kg slides with an initial velocity of 2 m sec down an inclined plane on to a spring of stiffness 10 kg/cm. If the co--efficient of friction is 0.2, angle ? = 30 the ratio of ... be a.More than one b.One c.Less than one d.Depends on the stiffness of spring e.None of the above

Last Answer : a. More than one

Least force required to draw a body up the inclined plane is W sin (plane inclination + friction angle) applied in the direction (A) Along the plane (B) Horizontally (C) Vertically(D) At an angle equal to the angle of friction to the inclined plane

Description : Least force required to draw a body up the inclined plane is W sin (plane inclination + friction  angle) applied in the direction  (A) Along the plane  (B) Horizontally  (C) Vertically  (D) At an angle equal to the angle of friction to the inclined plane 

Last Answer : (D) At an angle equal to the angle of friction to the inclined plane 

A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Description : A theodolite is said to be in perfect adjustment if (A) Rotation axis is vertical to the transit axis (B) Transit axis is perpendicular to line of collimation (C) Line of collimation sweeps out a vertical plane while the telescope is elevated or depressed (D) All the above

Last Answer : (D) All the above

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

When a uniform magnetic field B is applied to a current carrying coil, the coil will rotate in such a manner that its plane a) becomes parallel to B b) becomes anti-parallel to B c) makes an angle of 600 with B d) becomes perpendicular to B

Description : When a uniform magnetic field B is applied to a current carrying coil, the coil will rotate in such a manner that its plane a) becomes parallel to B b) becomes anti-parallel to B c) makes an angle of 600 with B d) becomes perpendicular to B

Last Answer : d) becomes perpendicular to B

When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Description : When a mass is rotating in a plane about a fixed point, its angular momentum is directed along: (1) the tangent to the orbit (2) a line perpendicular to the plane of rotation (3) the line making an angle of 45° to the plane of rotation (4) the radius

Last Answer : (2) a line perpendicular to the plane of rotation

The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Description : The truss element can deform only in the a.vertical direction b.horizontal direction c.inclined direction d.axial direction

Last Answer : d.axial direction

In psychrometric chart, specific humidity lines are: A. vertical B. horizontal C. inclined D. curved lines

Description : In psychrometric chart, specific humidity lines are: A. vertical B. horizontal C. inclined D. curved lines

Last Answer : ANSWER : B

Evaporator tubes are generally (A) Horizontal (B) Vertical (C) Inclined (D) Random

Description : Evaporator tubes are generally (A) Horizontal (B) Vertical (C) Inclined (D) Random

Last Answer : (B) Vertical

Which form of E-marketplace brings together buyers and sellers form the same industry? a) Horizontal b) Vertical c) Integrated d) Inclined

Description : Which form of E-marketplace brings together buyers and sellers form the same industry? a) Horizontal b) Vertical c) Integrated d) Inclined

Last Answer : b) Vertical

Which form of e-marketplace brings together buyers and sellers from the same industry? a. horizontal b. Vertical c. Integrated d. Inclined

Description : Which form of e-marketplace brings together buyers and sellers from the same industry? a. horizontal b. Vertical c. Integrated d. Inclined

Last Answer : a. horizontal

Which form of e-marketplace brings together buyers and sellers from the same industry? a. horizontal b. Vertical c.Integrated d.Inclined

Description : Which form of e-marketplace brings together buyers and sellers from the same industry? a. horizontal b. Vertical c.Integrated d.Inclined

Last Answer : a. horizontal

Venturimeter is used to measure the flow rate of fluids in pipes, when the pipe is in __________ position. (A) Horizontal (B) Vertical (C) Inclined (D) Any

Description : Venturimeter is used to measure the flow rate of fluids in pipes, when the pipe is in __________ position. (A) Horizontal (B) Vertical (C) Inclined (D) Any

Last Answer : (D) Any

A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Description : A metering mechanism that does not required cut-off device is: A. Inclined plate B. Vertical plate C. Horizontal plate D. All are correct

Last Answer :  All are correct

In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Description : In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Last Answer : c. Parallel in horizontal

On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Description : On mollier chart ,free expansion or throttling process from High pressure to atmosphere is represented by • Horizontal straight line • Vertical straight line • Straight inclined line • Curved line

Last Answer : • Horizontal straight line

The water tubes in a simple vertical boiler are _______ a. Horizontal b. Vertical c. Inclined d. All of the above

Description : The water tubes in a simple vertical boiler are _______ a. Horizontal b. Vertical c. Inclined d. All of the above

Last Answer : c. Inclined