Consider the following statements: Over head transmission lines are provided with earth wires:

Consider the following statements:

Over head transmission lines are provided with earth wires:

1 . To protect the transmission line from direct lightning strike

2. To protect the transmission line insulation from the indirect lightning strike

3. To balance the line currents

4. To provide path for neutral current

Which of these statement/s is/are correct?

(1) 1 and 3 (2) 1 and 4

(3) 1 only (4) 2 on|y
by

1 Answer

Answer :

Consider the following statements:

Over head transmission lines are provided with earth wires:

1 . To protect the transmission line from direct lightning strike

2. To protect the transmission line insulation from the indirect lightning strike

3. To balance the line currents

4. To provide path for neutral current

Which of these statement/s is/are correct?

(1) 1 and 3 (2) 1 and 4

(3) 1 only (4) 2 on|y

by

Related questions

Earth wire on EHV overhead transmission line is provided to protect the line against:

Description : Earth wire on EHV overhead transmission line is provided to protect the line against:

Last Answer : Earth wire on EHV overhead transmission line is provided to protect the line against: lightening surge

In which of the following transmission lines, the value of the Shunt admittance should be

Description : In which of the following transmission lines, the value of the Shunt admittance should be approximated to zero ? (A) A 66 kV 35 km long line (B) A 132 kV 200 km long line (C) A 220 kV 300 km long line (D) A 400 kV 500 km long line

Last Answer : In which of the following transmission lines, the value of the Shunt admittance should be approximated to zero ? (A) A 66 kV 35 km long line (B) A 132 kV 200 km long line (C) A 220 kV 300 km long line (D) A 400 kV 500 km long line

The purpose of guard ring in transmission lines is to

Description : The purpose of guard ring in transmission lines is to  (1) reduce the earth capacitance of the lowest unit. (2) increase the earth capacitance of the lowest unit. (3) reduce the transmission lines losses. (4) reduce the reactance of the line

Last Answer : The purpose of guard ring in transmission lines is to reduce the earth capacitance of the lowest unit.

why we use aluminium conductor and not copper in transmission lines ?

Description : why we use aluminium conductor and not copper in transmission lines ?

Last Answer : Because copper conductor are costlier than aluminium conductor

Why, when birds sit on transmission lines or current wires doesn't get shock?

Description : Why, when birds sit on transmission lines or current wires doesn't get shock?

Last Answer : It's true that if birds touch the single one line (phase or neutral) they don't get electrical shock... if birds touch 2 lines than the circuit is closed and they get electrical shock. so ... is grounded..So that means that human who touch the line closes the circuit between phase and neutral.

Why, when birds sit on transmission lines or current wires doesn't get shock?

Description : Why, when birds sit on transmission lines or current wires doesn't get shock?

Last Answer : A:Its true that if birds touch the single one line (phase or neutral) they don't get electrical shock... if birds touch 2 lines than the circuit is closed and they get electrical shock.. so if a human ... the air. If he is standing on the ground then touching the line (phase) he will get a shock.

Why Earth Wire is provided in the overhead transmission lines?

Description : Why Earth Wire is provided in the overhead transmission lines?

Last Answer : Earth wire is provided above the overhead transmission lines for protection against lightning strokes. The ground wire or earth wire protects the phase conductors or line conductors by attracting itself the ... traveling waves set in the lines by acting a short circuit secondary of the line current

If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.

Description : If 3000 kW power is to be transmitted over a distance of 30 km, the desirable transmission voltage will be.  (A) 11 kV (B) 33 kV (C) 66 kV (D) 132 kV

Last Answer : By

Consider the following statements. (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, (iii) Pier head is a structure constructed near the tip of break water near the harbour entrance. Of the statements (A) (i) and (ii) are correct (B) (ii) and (iii) are correct (C) (i) and (iii) are correct (D) (i), (ii) and (iii) are correct

Description : Consider the following statements. (i) Fender is the cushion provided on the face of the jetty for ships to come in contact, (ii) Slip is the space of water area between two adjacent piers where ships are berthed, ... correct (C) (i) and (iii) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

A long transmission line has considerable ……………….. effect.

Description : A long transmission line has considerable ……………….. effect. A) series capacitance B) shunt capacitance C) series inductance D) shunt inductance

Last Answer : Shunt Capacitance. 

A single-line-to-ground fault on a overhead transmission line creates

Description : A single-line-to-ground fault on a overhead transmission line creates (A) voltage sag (B) voltage swell (C) over voltage (D) voltage flicker 

Last Answer : Creates  overvoltage.

For a transmission line open circuit and short circuit impedances are 20 Ω and 5 Ω. Then characteristic

Description : For a transmission line open circuit and short circuit impedances are 20 Ω and 5 Ω. Then characteristic impedance is: (1) 100 Ω (2) 50 Ω (3) 25 Ω (4) 10 Ω

Last Answer : For a transmission line open circuit and short circuit impedances are 20 Ω and 5 Ω. Then characteristic impedance is: 10 Ω

In an AC transmission line difference in phase of voltage at two ends of the line is due to

Description : In an AC transmission line difference in phase of voltage at two ends of the line is due to (a) System voltage (b) Insulators (c) Resistance of line (d) Reactance of line

Last Answer : reactance of line

The main consideration for operating transmission line at high voltage is

Description : The main consideration for operating transmission line at high voltage is (a) to increase efficiency only. (b) to reduce power loss only. (c) to increase power transmission capability only. (d) All of the above

Last Answer : to reduce power loss: this is because when power is generated, it is generated at a very low voltage but because it is going to be transported over a long distance it is needed to be increase in order to avoid losses on the way such as copper loss and Eddy loss.

Effect of increase in temperature in an overhead transmission line is

Description : Effect of increase in temperature in an overhead transmission line is (a) to increase stress and length both (b) to decrease stress and length both (c) to decrease stress and increase length (d) None of the above 

Last Answer : D

An overhead transmission line has a span of 260 m. The weight of the conductor is 0.68 kg/m. The maximum

Description : An overhead transmission line has a span of 260 m. The weight of the conductor is 0.68 kg/m. The maximum allowable tension in the line is 1550 kg. Maximum sag of the line should be (a) 5.8 m (b) 4.6 m (c) 2.7 m (d) 3.7 m 

Last Answer : Maximum sag = (l^2)/8c So c = T/W c = 1550/0.68 c= 2279.4 Now Maximum sag = (260^2)/8(2279.4) = 3.7 (d)

The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Description : The input impedance of a short circuited loss less transmission line of characteristic impedance 50 Ohm is

Last Answer : Capacitive

What type of insulator will be used if the direction of the transmission line is to be changed?

Description : What type of insulator will be used if the direction of the transmission line is to be changed?

Last Answer : Suspension type of insulator will be used if the direction of the transmission line is to be changed.

Why are shunt reactors connected at the receiving end of long transmission line system:

Description : Why are shunt reactors connected at the receiving end of long transmission line system: (1) To increase the terminal voltage (2) To compensate voltage rise caused by capacitive charging at light load (3) To improve power factor (4) None of these

Last Answer : Why are shunt reactors connected at the receiving end of long transmission line system: To compensate voltage rise caused by capacitive charging at light load

In case of a ‘High Voltage DC’ transmission, how many minimum conductors are required?

Description : In case of a ‘High Voltage DC’ transmission, how many minimum conductors are required?

Last Answer : In case of a ‘High Voltage DC’ transmission, how many minimum conductors are required? one

To increase power transfer capability of a long transmission line, we should:

Description : To increase power transfer capability of a long transmission line, we should:  (1) Increase line resistance (2) Increase transmission voltage (3) Decrease line reactance (4) Both (2) & (3)

Last Answer : To increase power transfer capability of a long transmission line, we should:  (1) Increase line resistance (2) Increase transmission voltage (3) Decrease line reactance (4) Both (2) & (3)

Transmission of power by a.c. cables is impossible beyond

Description : Transmission of power by a.c. cables is impossible beyond   (a) 500 km (b) 300 km (c) 250 km (d) 45 km 

Last Answer : D

The inductance of single phase two wire power transmission line per km gets doubled when the

Description : The inductance of single phase two wire power transmission line per km gets doubled when the  (a) Distance between wires is doubled  (b) Distance between the wires is increased four fold  (c) ... the wires is increased as square of the original distance  (d) Radius of the wire is doubled

Last Answer : The inductance of single phase two wire power transmission line per km gets doubled when the Distance between the wires is increased as square of the original distance 

Galloping in transmission line conductors arises generally due to

Description : Galloping in transmission line conductors arises generally due to - (A) asymmetrical layer of ice formation (B) vortex phenomenon in light winds (C) heavy weight of line conductors (D) adoption of horizontal conductor

Last Answer : D

The inductance of a power transmission line increases with

Description : The inductance of a power transmission line increases with (A) decrease in line length. (B) increase in conductor diameter. (C) increase in spacing between phase conductors. (D) increase in load current carried by conductors.

Last Answer : The inductance of a power transmission line increases with  increase in spacing between phase conductors.

Stability of a transmission line can be increased by

Description : Stability of a transmission line can be increased by

Last Answer : Stability of a transmission line can be increased by Shunt capacitor, Series capacitor

In a transmission line if booster transformers are to be used, preferred location will be

Description : In a transmission line if booster transformers are to be used, preferred location will be  (A) At the receiving end (B) At the sending end (C) At the intermediate point (D) Anywhere in the line 

Last Answer : In a transmission line if booster transformers are to be used, preferred location will be At the intermediate point

In case the height of transmission tower is increased, which of the following parameter is likely to change?

Description : In case the height of transmission tower is increased, which of the following parameter is likely to change?  (A) Resistance (B) Inductance (C) Capacitance (D) None of the above

Last Answer : In case the height of transmission tower is increased, which of the following parameter is likely to change?  (A) Resistance (B) Inductance (C) Capacitance (D) None of the above

A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Description : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of

Last Answer : A transmission line has 1 P.0 impedance on a base of 11 KV, 100 MVA. On a base of 55 KV. it will have a P.0 impedance of 0.02 P.U

How many insulator disc used for 33 kV transmission voltage line?

Description : How many insulator disc used for 33 kV transmission voltage line?

Last Answer : 5,As 33kv is Vrms

how the booster is connected in transmission line ?

Description : how the booster is connected in transmission line ?

Last Answer : Booster is connected in series with transmission line

Internet access by transmitting digital data over the wires of a local telephone network is provided by  leased line  digital subscriber line  digital signal line  None of the Above

Description : Internet access by transmitting digital data over the wires of a local telephone network is provided by  leased line  digital subscriber line  digital signal line  None of the Above

Last Answer :  digital subscriber line

ACSR (Aluminium Conductor Steel Reinforced) are used as (A) over head transmission lines. (B) super conductors. (C) fuse (D) underground cables.

Description : ACSR (Aluminium Conductor Steel Reinforced) are used as (A) over head transmission lines. (B) super conductors. (C) fuse (D) underground cables.

Last Answer : (A) over head transmission lines.

What for series and shunt compensation provided in EHV transmission lines?

Description : What for series and shunt compensation provided in EHV transmission lines?

Last Answer : Answer: Series capacitance is provided in EHV lines to artificially reduce the series reactance of the line so as to improve stability, voltage regulation and transmission efficiency Shunt compensation ... reduce the line susceptance so as to improve the voltage regulation under light load condition

Why only GI wire connected as earth wire

Last Answer : Galvanized iron wire is zinc coated steel wire it prevents rusting it have longer life.

Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Description : Copper wires are generally used for electrical power transmission instead of iron wire because (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Last Answer : (3) copper is a better conductor of electricity than iron Explanation: Copper is generally preferred for electrical power transmission instead of iron because of its high electrical conductivity and low resistivity.

Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron

Description : Copper wires are generally used for electrical power transmission instead of iron wire because : (1) copper is cheaper than iron (2) copper is lighter than iron (3) copper is a better conductor of electricity than iron (4) copper can take higher power than iron 

Last Answer : copper is a better conductor of electricity than iron

Different computers are connected to a LAN by a cable and a (1) modem (2) interface card (3) special wires (4) telephone lines

Description : Different computers are connected to a LAN by a cable and a (1) modem (2) interface card (3) special wires (4) telephone lines

Last Answer : interface card

Consider the following statements: 1. Buried service lines should be avoided in an expansive soil region. 2. A swelling pressure less than 20 kN/m2 is not of much consequence. 3. If soil is not black in colour, it is unlikely to be an expansive soil. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Buried service lines should be avoided in an expansive soil region. 2. A swelling pressure less than 20 kN/m2 is not of much consequence. 3. If soil is not black in colour, it is unlikely to be an ... (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common talking circuit is composed of two ungrounded wires. C. The ringing circuit has two grounded wires connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Description : Which of the following statements is correct concerning the circuits in a sound powered telephone system? A. The ringing circuit is composed of only one common wire to ground. B. The common ... connected to each station. D. The talking and calling circuits are electrically dependent upon each other.

Last Answer : Answer: B

Consider the following statements: The total head against which a pump has to work must include, besides any other items, 1. the suction lift. 2. the delivery head. 3. the head lost due to friction at entrance in the rising main. 4. the head lost due to friction at exit in the rising main. Which of these statements are correct? (a) 1, 2 & 3 only (b) 2 & 3 only (c) 1, 2, 3 & 4 (d) 3 & 4 only

Description : Consider the following statements: The total head against which a pump has to work must include, besides any other items, 1. the suction lift. 2. the delivery head. 3. the head lost due to friction at entrance in the rising main. 4. the ... 2 & 3 only (b) 2 & 3 only (c) 1, 2, 3 & 4 (d) 3 & 4 only

Last Answer : (c) 1, 2, 3 & 4

The energy consumption and production patterns in a chemical plant over a 9 month period is provided in the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 297 381 479 585 440 234 239 239 Energy Consumption MWh /month 78.2 75.7 76.3 76.1 78.1 70.7 73.7 64.4 72.1 Estimate the cumulative energy savings at end of the 9th month and give your inference on the result ? ( consider 9 month data for evaluation for predicted energy consumption)

Description : The energy consumption and production patterns in a chemical plant over a 9 month period is provided in  the table below; Month 1 2 3 4 5 6 7 8 9 Production in Tonnes / month 493 ... and give your inference on the  result ? ( consider 9 month data for evaluation for predicted energy consumption)

Last Answer : It is required to use the equations Y= mX + C and  nC + mΣX = ΣY  cΣX + mΣX2 = ΣXY Month X =  Production in  Tonnes /  month Y =Energy  Consumption MWh  /month  X 2 XY 1 493 78.2 ... 73.7 54756 17240.63 8 239 64.4 57121 15402.96 9 239 72.1 57121 17228.98 3387 665.3 1410683 253221

Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Description : Man-made noise is usually from _______. A. transmission over power lines and by ground wave B. sky-wave C. space-wave D. troposphere

Last Answer : A. transmission over power lines and by ground wave

Transmission of printed material over telephone lines. A. Video text B. Facsimile C. Encoding D. Xerox copy

Description : Transmission of printed material over telephone lines. A. Video text B. Facsimile C. Encoding D. Xerox copy

Last Answer : B. Facsimile

Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog conversion at the start of a long distance transmission? A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Description : Computers cannot communicate with each other directly over telephone lines because they usedigitalpulses whereas telephone lines useanalog sound frequencies. What is the name of the device which permits digital to analog ... A. Interface B. Modem C. Attenuation D. Teleprocessor E. None of the above

Last Answer : Modem

The advantage of cables over overhead transmission lines is (a) easy maintenance (b) low cost (c) can be used in congested areas (d) can be used in high voltage circuits

Description : The advantage of cables over overhead transmission lines is (a) easy maintenance (b) low cost (c) can be used in congested areas (d) can be used in high voltage circuits

Last Answer : (c) can be used in congested areas

The device that converts computer output for transmission over telephone lines is called (1) interface (2) interpreter (3) modem (4) I/O port

Description : The device that converts computer output for transmission over telephone lines is called (1) interface (2) interpreter (3) modem (4) I/O port

Last Answer : modem

Bulk power transmission over long HVDC lines is preferred because of

Description : Bulk power transmission over long HVDC lines is preferred because of

Last Answer : Bulk power transmission over long HVDC lines is preferred because of Low cost of HVDC terminal