Description : A car whose mass is 2 metric tons is accelerated uniformly from stand hill to 100 kmph in 5 sec. Find the driving force in Newton’s. a. 11,120 N b. 11,320 N c. 11,420 N d. 11520 N formula: F= ma / k
Last Answer : 11,120N
Description : What is the force required to accelerate amass of 30kg at a rate of 15m/s². a. 460 N b. 380 N c. 560 N d. 450 N F = ma
Last Answer : 450 N
Description : Refer to problem # 11. Determine the force that accelerates if to 12 m/s^2. horizontally along frictionless plane. A. 2474.23 N B. 2574.23 N C. 3474.23 N D. 2374.23 N Formula : M = wk / g F = ma /k
Last Answer : 2474.23 N
Description : The unit of mass in S.I. units is (a) kilogram (b) gram (c) tonne (d) quintal (e) newton
Last Answer : Answer : a
Description : The weight of an object is 50lb. What is its mass at standard condition? a. 50 lbm b. 60 lbm c. 70 lbm d. 80 lbm formula: m = Fgk /g
Last Answer : 50 lbm
Description : Two masses, one of the 10kg and the other unknown, are placed on a scale in a region where g = 9.67 m/sec2 . The combined weight of these two masses is 174.06 N. Find the unknown mass in kg. a. 20 kg b. 19 kg c. 18 kg d. 17 kg formula: m=Fg k / g
Last Answer : 18 kg
Description : _________ is the unit of pressure and stress. a) Newton b) Pascal c) Hertz d) Joule
Last Answer : Pascal
Description : __________ is the unit of force. a) Newton b) Pascal c) Hertz d) Joule
Last Answer : Newton
Description : Entropy is measured in ______. A. Joule/Kelvin B. Joule-Meter/Kelvin C. Meter/Kelvin D. Newton/Kelvin
Last Answer : Joule/Kelvin
Description : What is the SI unit of energy? A. Newton B. Btu C. Calorie D. Joule
Last Answer : Joule
Description : The unit of power in S.I. units is (a) newton (b) pascal (c) erg (d) watt (e) joule.
Last Answer : Answer : d
Description : When an object undergoes thermal expansion, a. any holes in the object expand as well b. any holes in the object remain the same c. mass increases d. molecular activities would cease
Last Answer : any holes in the object expand as well
Description : A system weighing 2kN. Determine the force that accelerate if to 12 m/s^2. a. vertically upward when g = 9.7 m/s^2 A. 4474.23 N B.5484.23 N C.4495.23 N D.5488.23 N Formula: F = m/k (a +g)
Last Answer : 4474.23 N
Description : The SI unit of mass a. kg b. g c. N d. None of the above
Last Answer : kg
Description : A mass of 5kg is 100m above a given datum where local g = 9.75 m/s2 . Find the gravitational force in newtons. (Formula: Fg= mg/k ) a. 48.75 N b. 50 N c. 45 N d. None of the above
Last Answer : 48.75 N
Description : Work done in an adiabatic process between a given pair of end states depends on (a) the end states only (b) particular adiabatic process (c) the value of index n (d) the value of heattransferred (e) mass of the system.
Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Isolated System
Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole? a. 125.02 b. 130.08 c. 135.05 d. 120.04
Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}
Description : _______ of a body means the force of the gravity Fg on the body a. Mass b. Weight c. Density d. Volume
Last Answer : Weight
Description : ______ of a Body is the absolute quantity of a matter in it. a. Mass b. Weight c. Density d. Volume
Last Answer : Mass
Description : Mass (not weight) per unit volume a. Specific Weight b. Specific Volume c. Density d. None of the above
Last Answer : Density
Description : The mass of one mole of a substance in grams is known as ______. A. Molar weight B. Molar mass C. Molar volume D. Molar constant
Last Answer : Molar mass
Description : The gas constant of a certain gas is the ratio of: A. Universal gas constant to molar mass B. Universal gas constant to atomic weight C. Universal gas constant to atomic number D. Universal gas constant to number of moles
Last Answer : Universal gas constant to molar mass
Description : How many Newton’s (N) in 900,000 dynes? a) 8 Newton’s b) 9 Newton’s c) 7 Newton’s d) 6 Newton’s Formula: 1Newton (N)=100,000dynes
Last Answer : 9 Newton’s
Description : A 600kg hammer of a pile driver is lilted 2m the pilling head. What is the change of potential energy? If the hammer is realest. What will be its velocity and the instant if it sticks the pilling? a. 10,772 N-m and 5.26m/s ... c. 11,772 N-m and 6.26m/s d. 11,77 2N-m and5.26m/s ∫PE = mgo(∫Z)/gc
Last Answer : 11,772 N-m and 6.26m/s
Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam. A.2500 lbf-ft/lbm B.3300 lbf-ft/lbm C.5400 lbf-ft/lbm D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV
Last Answer : 3300 lbf-ft/lbm
Description : Which of the following does not determine the amount of internal energy an object has? a. temperature b. amount of material c. type of material d. shape of the object
Last Answer : shape of the object
Description : A stress which develops within an object when it attempts to expand or contract in response to a temperature changes, but cannot, due to being held rigidly in place. a. elongation b. thermal stress c. expansion contraction d. thermal expansion
Last Answer : thermal stress
Description : The energy that flows from higher temperature object to a lower temperature object because of the difference in temperature is called a. heat b. temperature c. thermodynamics cycle d. energy flow
Last Answer : heat
Description : What refers to the amount of heat needed to raise the temperature of an object by one degree Celsius or 1K? A. Heat capacity B. Specific heat C. Latent heat D. Molar heat
Last Answer : Heat capacity
Description : What is an energy that can be transferred from one object to another causing a change in temperature of each object? A. Power B. Heat transfer C. Heat D. Work
Last Answer : Heat
Description : “If the temperature o f a fixed quantity of a gas is held constant during a change of state, the volume varies inversely with the absolute pressure. a. Charle’s Law b. Boyle’s Law c. Dalton’s Law d. Amagat’s Law
Last Answer : Boyle’s Law
Description : Calculate the power output in horsepower of an 80-kg man that climbs a flight of stairs 3.8 m high in 4.0 s. a) 744.8 hp b) 0.998 hp c) 746 hp d) 1.998 hp Formula: Power = Fd/t = mgh/t F = W = mg d = h
Last Answer : 0.998 hp
Description : Roughly what is the total weight of air in the entire earth? a. 1 x 10^5 tons b. 2 x 10^6 tons c. 6 x 10^15 tons d. 8 x 10^10 tons
Last Answer : 6 x 10^15 tons
Description : The SI unit of pressure a. Pa b. N c. J d. None of the above
Last Answer : Pa
Description : A 30-m vertical column of fluid (density 1878 kg/m3 ) is located where g= 9.65 mps2 . Find the pressure at the base of the column. (Formula: pg= gρhg/k ) a. 543680 N/m2 b. 543.68 kPa (gauge) c. Both a & b d. None of the above
Last Answer : Both a & b
Description : Find the pressure due to a column of mercury 74.0 cm high. a. 91.80 x 10^3 N/m^2 b. 73.56 x 10^2 N/m^2 c. 9.86 x 10^4 N/m^2 d. 87.2 x 10^4 N/m^2
Last Answer : 9.86 x 10^4 N/m^2
Description : The unit “pascal” is equivalent to ______. A. N/m^2 B. N/m C. N-m D. N-m^2
Last Answer : N/m^2
Description : The value of 1 mm of Hg is equal to A. 1.333 N/m2 B. 13.33 N/m2 C. 133.3 N/m2 D. 1333 N/m2
Last Answer : Answer: C
Description : If the value of n = 0 in the equation pvn = C, then the process is called A. constant volume process B. adiabatic process C. constant pressure process D. isothermal process
Description : Molecular volume of any perfect gas at 600 x 103 N/m2 and 27°C will be (a) 4.17m3/kgmol (b) 400 m3/kg mol (c) 0.15 m3/kg mol (d) 41.7 m3/kg mol (e) 417m3/kgmol.
Description : Minimum work in compressor is possible when the value of adiabatic index n is equal to (a) 0.75 (b) 1 (c) 1.27 (d) 1.35 (e) 2.
Last Answer : Answer : b
Description : One watt is equal to (a) 1 Nm/s (b) 1 N/mt (c) 1 Nm/hr (d) 1 kNm/hr (e) 1 kNm/mt.
Description : Change in enthalpy of a system is the heat supplied at (a) constant pressure (b) constant temperature (c) constant volume (d) constant entropy (e) N.T.P. condition.
Description : The term N.T.P. stands for (a) nominal temperature and pressure (b) natural temperature and pressure (c) normal temperature and pressure (d) normal thermodynamic practice (e) normal thermodynamic pressure.
Last Answer : Answer : c
Description : The index of compression n tends to reach ratio of specific heats y when (a) flow is uniform and steady (b) process is isentropic (c) process is isothermal (d) process ... specific heat does not change with temperature (e) process is isentropic and specific heat changes with temperature.
Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant (a) volume (b) pressure (c) temperature (d) enthalpy (e) entropy
Description : The value of n = 1 in the polytropic process indicates it to be (a) reversible process (b) isothermal process (c) adiabatic process (d) irreversible process (e) free expansion process.
Description : Energy can neither created nor destroyed. It can only change forms. a. Conservation of Mass Principle b. Conservation of Energy Principle c. Conservation of Momentum Principle d. Conservation of Heat Principle
Last Answer : Conservation of Energy Principle
Description : A control volume refers to what? a. A fixed region in space b. A reversible process c. an isolated system d. a specified mass
Last Answer : A fixed region in space