_________ is the unit of pressure and stress.  a) Newton  b) Pascal  c) Hertz  d) Joule

_________ is the unit of pressure
and stress.
 a) Newton
 b) Pascal
 c) Hertz
 d) Joule
by

1 Answer

Answer :

Pascal
by

Related questions

__________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Description : __________ is the unit of force.  a) Newton  b) Pascal  c) Hertz  d) Joule

Last Answer : Newton

The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Description : The unit of power in S.I. units is  (a) newton  (b) pascal  (c) erg  (d) watt  (e) joule.

Last Answer : Answer : d

What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Description : What is the SI unit of energy?  A. Newton  B. Btu  C. Calorie  D. Joule

Last Answer : Joule

Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Description : Entropy is measured in ______.  A. Joule/Kelvin  B. Joule-Meter/Kelvin  C. Meter/Kelvin  D. Newton/Kelvin

Last Answer : Joule/Kelvin

In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Description : The unit of pressure in S.I. units is  (a) kg/cm2  (b) mm of water column  (c) pascal  (d) dynes per square cm  (e) bars

Last Answer : Answer : c

The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Description : The amount of heat required to raise the temperature of the unit mass of gas through one degree at constant volume, is called  A.specific heat at constant volume  B.specific heat at constant pressure  C.kilo Joule  D.none of these

Last Answer : Answer: A

_________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Description : _________ is the quantity of heat required to raise the temperature of one pound of water 1 F˚ from 63 ˚F to 64 ˚F.  a. one Joule  b. one calorie  c. one watt  d. one BTU

Last Answer : one BTU

The unit “pascal” is equivalent to ______.  A. N/m^2  B. N/m  C. N-m  D. N-m^2

Description : The unit “pascal” is equivalent to ______.  A. N/m^2  B. N/m  C. N-m  D. N-m^2

Last Answer : N/m^2

The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Description : The unit of energy in S.I. units is  (a) watt  (b) joule  (c) joule/s  (d) joule/m  (e) joule m.

Last Answer : Answer : b

The unit of work or energy in S.I. units is (A) Newton (B) Pascal (C) Kilogram meter (D) Joule

Description : The unit of work or energy in S.I. units is (A) Newton (B) Pascal (C) Kilogram meter (D) Joule

Last Answer : (D) Joule

What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

A cycle consisting of two adiabatics and two constant pressure processes is known as  (a) Otto cycle  (b) Ericsson cycle  (c) Joule cycle  (d) Stirling cycle  (e) Atkinson cycle.

Description : A cycle consisting of two adiabatics and two constant pressure processes is known as  (a) Otto cycle  (b) Ericsson cycle  (c) Joule cycle  (d) Stirling cycle  (e) Atkinson cycle.

Last Answer : Answer : c

The unit of mass in S.I. units is  (a) kilogram  (b) gram  (c) tonne  (d) quintal  (e) newton

Description : The unit of mass in S.I. units is  (a) kilogram  (b) gram  (c) tonne  (d) quintal  (e) newton

Last Answer : Answer : a

The force per unit length across such a line in the surface is called _________.  a. force per length  b. surface tension  c. Pressure  d. Density

Description : The force per unit length across such a line in the surface is called _________.  a. force per length  b. surface tension  c. Pressure  d. Density

Last Answer : surface tension

Who coined the word energy?  a. James Joule  b. Thomas Young  c. Rudolf Diesel  d. Kelvin

Description : Who coined the word energy?  a. James Joule  b. Thomas Young  c. Rudolf Diesel  d. Kelvin

Last Answer : Thomas Young

A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Description : A Bell-Coleman cycle is a reversed of which the following cycles?  a. Stirling cycle  b. Joule cycle  c. Carnot cycle  d. Otto cycle

Last Answer : Joule cycle

The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Description : The mechanical equivalent of heat is  a. joule  b. calorie  c. Btu  d. Specific heat

Last Answer : joule

The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1 pound of water by 1°F is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : BTU

The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Description : The amount of heat required to raise the temperature of 1kg of water through 1 °C is called ______.  A. Calorie  B. Joule  C. BTU  D. Kilocalorie

Last Answer : Kilocalorie

One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Description : One joule is equivalent to one _____.  A. Kg m/ s^2 ∙  B. Kg m^2/s^2 ∙  C. Kg m^2/s ∙  D. Kg m/s

Last Answer : Kg m^2/s^2

The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Description : The efficiency of Joule cycle is  A. greater than Carnot cycle  B. less than Carnot cycle  C. equal to Carnot cycle  D. none of these

Last Answer : Answer: B

The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Description : The following cycle is used for air craft refrigeration  (a) Brayton cycle  (b) Joule cycle  (c) Carnot cycle  (d) Bell-Coleman cycle  (e) Reversed-Brayton cycle.

Last Answer : Answer : e

Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Description : Which of the following cycles has maximum efficiency  (a) Rankine  (b) Stirling  (c) Carnot  (d) Brayton  (e) Joule.

Last Answer : Answer : c

Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Description : Which of the following cycles is not a reversible cycle  (a) Carnot  (b) Ericsson  (c) Stirling  (d) Joule  (e) none of the above.

Last Answer : Answer : e

Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Description : Reversed joule cycle is called  (a) Carnot cycle  (b) Rankine cycle  (c) Brayton cycle  (d) Bell Coleman cycle  (e) Dual cycle.

Last Answer : Answer : c

Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Description : Thermal power plant works on  (a) Carnot cycle  (b) Joule cycle  (d) Rankine cycle  (d) Otto cycle  (e) Brayton cycle.

Last Answer : Answer : c

Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Description : Name the quantities which are measured by the following units. (i) Newton (ii) Joule (iii) Watt (iv) Volt (v) Light year (vi) Angstrom (vii) Acre-foot (viii) Becquerel (ix) Hertz (x) Cusec

Last Answer : Answers: (i) Force (ii) Work Energy (iii) Power of electricity (iv) Potential difference (v) Distance of stars and planets (vi) Length (vii) Volume (viii) Radioactivity (ix) Frequency (x) Rate of flow of water

How much does an object having the mass of 100kg weight in newton.  a. 981 N  b. 991 N  c. 981.6 N  d. 980.1N F = ma

Description : How much does an object having the mass of 100kg weight in newton.  a. 981 N  b. 991 N  c. 981.6 N  d. 980.1N F = ma

Last Answer : 900,000lb/hr;625 ft/s981 N

_________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation.  a. relative humidity  b. triple point temperature  c. dew point  d. critical point

Description : _________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation.  a. relative humidity  b. triple point temperature  c. dew point  d. critical point

Last Answer : dew point

If any external pressure is applied to a confined fluid, the pressure will be increased at every point in the fluid by the amount of the external pressure is known as _________.  a. Torricelli’s law  b. Barometric law  c. Newton’s Second law  d. Pascal’s law

Description : If any external pressure is applied to a confined fluid, the pressure will be increased at every point in the fluid by the amount of the external pressure is known as _________.  a. Torricelli’s law  b. Barometric law  c. Newton’s Second law  d. Pascal’s law

Last Answer : Pascal’s law

_________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Description : _________ is defined as that equivalent to the pressure due to a column of mercury 76cm long.  a. surface pressure  b. gage pressure  c. standard atmospheric pressure  d. isobaric pressure

Last Answer : standard atmospheric pressure

Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively.  a. raising the temp and lowering the temp  b. maintaining the pressure and changing the temperature  c. decreasing the volume and increasing the pressure  d. lowering the temp and raising the temp

Description : Adiabatic heating and Adiabatic cooling really means _________ and _________ respectively.  a. raising the temp and lowering the temp  b. maintaining the pressure and changing the temperature  c. decreasing the volume and increasing the pressure  d. lowering the temp and raising the temp

Last Answer : raising the temp and lowering the temp

Boiling temperature of a material is dependent on its _________.  a. volume  b. power  c. heat  d. pressure

Description : Boiling temperature of a material is dependent on its _________.  a. volume  b. power  c. heat  d. pressure

Last Answer : pressure

The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Description : The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Last Answer : normal boiling point

The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Description : The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Last Answer : no pressure

Vapor pressure depends only on _________.  a. pressure  b. force  c. volume  d. temperature

Description : Vapor pressure depends only on _________.  a. pressure  b. force  c. volume  d. temperature

Last Answer : temperature

Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Description : Is the force of gravity on unit volume?  a. Specific Weight  b. Specific Heat  c. Specific Pressure  d. Specific Volume

Last Answer : Specific Weight

The SI unit of pressure  a. Pa  b. N  c. J  d. None of the above

Description : The SI unit of pressure  a. Pa  b. N  c. J  d. None of the above

Last Answer : Pa

A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Description : A unit of pressure used in high vacuum technology, which is equal to 1mmhg.  a. specific heat  b. isometric  c. isobaric  d. torr

Last Answer : torr

What is the SI unit of pressure?  A. Atm  B. Bar  C. Pa  D. Psi

Description : What is the SI unit of pressure?  A. Atm  B. Bar  C. Pa  D. Psi

Last Answer : Pa

What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

Description : What is defined as the force per unit area?  A. Pressure  B. Energy  C. Work  D. Power

Last Answer : Pressure

The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant volume  C. the amount of heat required to raise the temperature of 1 kg of water through one degree  D. any one of the above

Description : The specific heat at constant volume is  A. the amount of heat required to raise the temperature of unit mass of gas through one degree, at constant pressure  B. the amount of heat required to raise ... to raise the temperature of 1 kg of water through one degree  D. any one of the above

Last Answer : Answer: B

The pressure exerted by an ideal gas is __________ of the kinetic energy of all the molecules contained in a unit volume of gas.  A.one-half  B.one-third  C.two-third  D.three-fourth

Description : The pressure exerted by an ideal gas is __________ of the kinetic energy of all the molecules contained in a unit volume of gas.  A.one-half  B.one-third  C.two-third  D.three-fourth

Last Answer : Answer: C

_________ is the energy stored within a body or substance by virtue of the activity and configuration of its molecules.  a. Internal Energy  b. External Energy  c. Kinetic Energy  d. Potential Energy

Description : _________ is the energy stored within a body or substance by virtue of the activity and configuration of its molecules.  a. Internal Energy  b. External Energy  c. Kinetic Energy  d. Potential Energy

Last Answer : Internal Energy

The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Description : The most efficient cycle that can operate between two constant temperature reservoir is the _________.  a. Otto Cycle  b. Lazare Cycle  c. Isothermal Cycle  d. Carnot Cycle

Last Answer : Carnot Cycle

The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Description : The flow through an open system is _________ if all properties at each point within the system remain constant with respect to time.  a. streamline flow  b. steady flow  c. constant flow  d. algebraic flow

Last Answer : steady flow

One calorie is equal to _________.  a. 1/180 W.h  b. 1/860 W.h  c. 1/360 W.h  d. 1/250 W.h

Description : One calorie is equal to _________.  a. 1/180 W.h  b. 1/860 W.h  c. 1/360 W.h  d. 1/250 W.h

Last Answer : 1/860 W.h

Gasoline and Diesel Engines are best described by the _________.  a. Otto Cycle  b. Burnign Cycle  c. Shikki Cycle  d. Shapa R’ Elli Cycle

Description : Gasoline and Diesel Engines are best described by the _________.  a. Otto Cycle  b. Burnign Cycle  c. Shikki Cycle  d. Shapa R’ Elli Cycle

Last Answer : Otto Cycle

Intensive properties of a system are called _________.  a. Bulk Properties  b. Innate Properties  c. Natural Properties  d. Inside Properties

Description : Intensive properties of a system are called _________.  a. Bulk Properties  b. Innate Properties  c. Natural Properties  d. Inside Properties

Last Answer : Bulk Properties