What happens to the internal energy of water at reference temperature where enthalpy is zero?  a. Becomes negative  b. Becomes positive  c. Remains constant  d. Cannot be defined

What happens to the internal
energy of water at reference
temperature where enthalpy is zero?
 a. Becomes negative
 b. Becomes positive
 c. Remains constant
 d. Cannot be defined
by

1 Answer

Answer :

Becomes negative
by

Related questions

Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Description : Which of the following occurs in a reversible polytrophic process?  a. Enthalpy remains constant  b. Internal energy does not change  c. Some heat transfer occurs  d. Entropy remains constant

Last Answer : Some heat transfer occurs

According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  (c) internal energy, enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Description : According to first law of thermodynamics  (a) work done by a system is equal to heat transferred by the system  (b) total internal energy of a system during a process remains constant  ( ... , enthalpy and entropy during a process remain constant  (d) total energy of a system remains constant

Last Answer : Answer : d

An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Description : An ideal gas is compresses isothermally. The enthalpy change is  a. Always negative  b. Always positive  c. zero  d. undefined

Last Answer : zero

Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : a

_____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave.  a. Entrophy  b. Enthalpy  c. Specific Heat  d. None of the above

Last Answer : Entrophy

For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Description : For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Last Answer : Answer : d

In an isothermal process,  A. there is no change in temperature  B. there is no change in enthalpy  C. there is no change in internal energy  D. all of these

Description : In an isothermal process,  A. there is no change in temperature  B. there is no change in enthalpy  C. there is no change in internal energy  D. all of these

Last Answer : Answer: D

If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Description : If heat be exchanged in a reversible manner, which of the following property of the working substance will change accordingly  (a) temperature  (b) enthalpy  (c) internal energy  (d) entropy  (e) all of the above.

Last Answer : Answer : d

Which of the following is the property of a system  (a) pressure and temperature  (b) internal energy  (c) volume and density  (d) enthalpy and entropy  (e) all of the above.

Description : Which of the following is the property of a system  (a) pressure and temperature  (b) internal energy  (c) volume and density  (d) enthalpy and entropy  (e) all of the above.

Last Answer : Answer : e

On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises?  a. the relative humidity increases  b. the relative humidity decreases  c. the relative humidity remains constant  d. the air would eventually become saturated

Description : On a day when the partial pressure of water vapor remains constant, what happens as the temperature rises?  a. the relative humidity increases  b. the relative humidity decreases  c. the relative humidity remains constant  d. the air would eventually become saturated

Last Answer : the relative humidity decreases

An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Description : An ideal gas is compressed in a cylinder so well insulated that there is essentially no heat transfer. The temperature of gas  a. Remains constant  b. increases  c. decreases  d. is basically zero

Last Answer : increases

In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Description : In an isothermal process, the internal energy  (a) increases  (b) decreases  (c) remains constant  (d) first increases and then decreases  (e) first decreases and then increases.

Last Answer : Answer : c

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

Heat cannot be created, nor destroyed, but it can be changed from one form to another. The energy in the universe remains constant.  a. 1st Law of Energy Conservation  b. 2nd Law of Energy Conservation  c. 3rd Law of Energy Conservation  d. None of the above

Description : Heat cannot be created, nor destroyed, but it can be changed from one form to another. The energy in the universe remains constant.  a. 1st Law of Energy Conservation  b. 2nd Law of Energy Conservation  c. 3rd Law of Energy Conservation  d. None of the above

Last Answer : 1st Law of Energy Conservation

Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Description : Entropy is the measure of:  a. The internal energy of a gas  b. The heat capacity of a substance  c. Randomness or disorder  d. The change of enthalpy of a system

Last Answer : Randomness or disorder

What is the measure of the energy that is no longer available to perform useful work within the current environment?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is the measure of the energy that is no longer available to perform useful work within the current environment?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : entropy

What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Description : What is known as the total heat and heat content at various times in the history?  a. enthalpy  b. entropy  c. internal energy  d. latent heat

Last Answer : enthalpy

Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Description : Sum of the internal energy of a substance and the product of pressure and volume.  a. Specific Heat  b. Specific Gravity  c. Isolated System  d. Enthalpy

Last Answer : Enthalpy

Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam.  A.2500 lbf-ft/lbm  B.3300 lbf-ft/lbm  C.5400 lbf-ft/lbm  D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV

Last Answer : 3300 lbf-ft/lbm

The sum of internal energy (U) and the product of pressure and volume (p.v) is known as  A. workdone  B. entropy  C. enthalpy  D. none of these

Description : The sum of internal energy (U) and the product of pressure and volume (p.v) is known as  A. workdone  B. entropy  C. enthalpy  D. none of these

Last Answer : Answer: C

Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Description : Total heat of a substance is also known as  (a) internal energy  (b) entropy  (c) thermal capacity  (d) enthalpy  (e) thermal conductance.

Last Answer : Answer : d

Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Description : Change in enthalpy of a system is the heat supplied at  (a) constant pressure  (b) constant temperature  (c) constant volume  (d) constant entropy  (e) N.T.P. condition.

Last Answer : Answer : a

If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant  (a) volume  (b) pressure  (c) temperature  (d) enthalpy  (e) entropy

Last Answer : Answer : a

Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure  (a) enthalpy  (b) volume  (c) mass  (d) entropy  (e) specific volume.

Last Answer : Answer : b

Compressed air coming out from a punctured football  (a) becomes hotter  (b) becomes cooler1  (c) remains at the same temperature  (d) may become hotter or cooler depend-ing upon the humidity of the surround¬ing air  (e) attains atmospheric temperature.

Description : Compressed air coming out from a punctured football  (a) becomes hotter  (b) becomes cooler1  (c) remains at the same temperature  (d) may become hotter or cooler depend-ing upon the humidity of the surround¬ing air  (e) attains atmospheric temperature.

Last Answer : (b) becomes cooler1

The kinetic energy of molecules of a gas becomes zero at absolute zero temperature.  A. Agree  B. Disagree

Description : The kinetic energy of molecules of a gas becomes zero at absolute zero temperature.  A. Agree  B. Disagree

Last Answer : Answer: A

The prefix “iso” used to designate a process means ______.  A. Cannot be interchanged  B. Remains constant  C. Approximately equal  D. Slight difference

Description : The prefix “iso” used to designate a process means ______.  A. Cannot be interchanged  B. Remains constant  C. Approximately equal  D. Slight difference

Last Answer : Remains constant

What is the energy absorbed during chemical reaction under constant volume conditions?  A. Entropy  B. Ion exchange  C. Enthalpy  D. Enthalpy of reaction

Description : What is the energy absorbed during chemical reaction under constant volume conditions?  A. Entropy  B. Ion exchange  C. Enthalpy  D. Enthalpy of reaction

Last Answer : Enthalpy

What remains constant during a steady-flow process?  A. Mass  B. Energy content of the control volume  C. Temperature  D. Mass and energy content of the control volume

Description : What remains constant during a steady-flow process?  A. Mass  B. Energy content of the control volume  C. Temperature  D. Mass and energy content of the control volume

Last Answer : Mass and energy content of the control volume

Which of the following is the work done for a closed reversible isometric system?  a. negative  b. positive  c. zero  d. undefined

Description : Which of the following is the work done for a closed reversible isometric system?  a. negative  b. positive  c. zero  d. undefined

Last Answer : zero

What is the value of the work done for a closed, reversible isometric system?  a. zero  b. positive  c. negative  d. positive or negative

Description : What is the value of the work done for a closed, reversible isometric system?  a. zero  b. positive  c. negative  d. positive or negative

Last Answer : zero

What is the value of the work done for a closed, reversible isometric system?  A. Zero  B. Positive  C. Negative  D. Positive or negative

Description : What is the value of the work done for a closed, reversible isometric system?  A. Zero  B. Positive  C. Negative  D. Positive or negative

Last Answer : Zero

What is considered as the heat content of a system?  A. Enthalpy  B. Entropy  C. Internal heat  D. Molar heat

Description : What is considered as the heat content of a system?  A. Enthalpy  B. Entropy  C. Internal heat  D. Molar heat

Last Answer : Enthalpy

_________ the very small KE still present in molecules at absolute zero temperature.  a. internal KE  b. Atomic kinetic energy  c. Zero-Point Energy  d. Subliminal Energy

Description : _________ the very small KE still present in molecules at absolute zero temperature.  a. internal KE  b. Atomic kinetic energy  c. Zero-Point Energy  d. Subliminal Energy

Last Answer : Zero-Point Energy

What form of energy refers to those a system possesses as a whole with respect to some outside reference frame, such as potential and kinetic energies?  A. Macroscopic form of energy  B. Microscopic form of energy  C. Internal energy  D. External energy

Description : What form of energy refers to those a system possesses as a whole with respect to some outside reference frame, such as potential and kinetic energies?  A. Macroscopic form of energy  B. Microscopic form of energy  C. Internal energy  D. External energy

Last Answer : Macroscopic form of energy

Absolute zero pressure will occur  (a) at sea level  (b) at the center of the earth  (c) when molecular momentum of the system becomes zero  (d) under vacuum conditions  (e) at a temperature of – 273 °K

Description : Absolute zero pressure will occur  (a) at sea level  (b) at the center of the earth  (c) when molecular momentum of the system becomes zero  (d) under vacuum conditions  (e) at a temperature of – 273 °K

Last Answer : Answer : c

The volume of a given amount of water _________ as the temperature decreases from 4˚C to 0˚C.  a. decreases  b. increases  c. remains constant  d. none of the above

Description : The volume of a given amount of water _________ as the temperature decreases from 4˚C to 0˚C.  a. decreases  b. increases  c. remains constant  d. none of the above

Last Answer : increases

Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Description : Change in internal energy in a closed system is equal to heat transferred if the reversible process takes place at constant  (a) pressure  (b) temperature  (c) volume  (d) internal energy  (e) entropy.

Last Answer : Answer : c

Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Description : Gas being heated at constant volume is undergoing the process of.  a. isometric  b. specific heat  c. enthalpy  d. isothermal

Last Answer : isometric

The free expansion process is a constant enthalpy process.  A. Correct  B. Incorrect

Description : The free expansion process is a constant enthalpy process.  A. Correct  B. Incorrect

Last Answer : Answer: A

What is a process during which the temperature remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Description : What is a process during which the temperature remains constant?  A. Isobaric process  B. Isothermal process  C. Isochoric process  D. Isometric process

Last Answer : Isothermal process

The absolute pressure of a given mass of a perfect gas varies inversely as its volume, when the temperature remains constant. This statement is known as Charles’ law.  A. Yes  B. No

Description : The absolute pressure of a given mass of a perfect gas varies inversely as its volume, when the temperature remains constant. This statement is known as Charles’ law.  A. Yes  B. No

Last Answer : Answer: B

A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called  A. isothermal process  B. hyperbolic process  C. adiabatic process  D. polytropic process

Last Answer : Answer: A

According to Gay-Lussac law, the absolute pressure of a given mass of a perfect gas varies __________ as its absolute temperature, when the volume remains constant.  A. directly  B. indirectly

Description : According to Gay-Lussac law, the absolute pressure of a given mass of a perfect gas varies __________ as its absolute temperature, when the volume remains constant.  A. directly  B. indirectly

Last Answer : Answer: A

According to which law, all perfect gases change in volume by l/273th of their original volume at 0°C for every 1°C change in temperature when pressure remains constant  (a) Joule’s law  (b) Boyle’s law  (c) Regnault’s law  (d) Gay-Lussac law  (e) Charles’ law.

Description : According to which law, all perfect gases change in volume by l/273th of their original volume at 0°C for every 1°C change in temperature when pressure remains constant  (a) Joule’s law  (b) Boyle’s law  (c) Regnault’s law  (d) Gay-Lussac law  (e) Charles’ law.

Last Answer : Answer : e

Intensive property of a system is one whose value  (a) depends on the mass of the system, like volume  (b) does not depend on the mass of the system, like temperature, pressure, etc.  (c) is not dependent on the path followed but on the state  (d) is dependent on the path followed and not on the state  (e) remains constant.

Description : Intensive property of a system is one whose value  (a) depends on the mass of the system, like volume  (b) does not depend on the mass of the system, like temperature, pressure, etc.  (c) is not ... on the state  (d) is dependent on the path followed and not on the state  (e) remains constant.

Last Answer : Answer : b

According to Gay-Lussac law for a perfect gas, the absolute pressure of given mass varies directly as  (a) temperature  (b) absolute  (c) absolute temperature, if volume is kept constant (d) volume, if temperature is kept constant  (e) remains constant,if volume and temperature are kept constant.

Description : According to Gay-Lussac law for a perfect gas, the absolute pressure of given mass varies directly as  (a) temperature  (b) absolute  (c) absolute temperature, if volume is kept constant ... , if temperature is kept constant  (e) remains constant,if volume and temperature are kept constant.

Last Answer : Answer : c

In the first law of thermodynamics, the total energy of the system remains constant.  A. True  B. False

Description : In the first law of thermodynamics, the total energy of the system remains constant.  A. True  B. False

Last Answer : Answer: A

The condition of perfect vacuum, i.e., absolute zero pressure can be attained at  (a) a temperature of – 273.16°C  (b) a temperature of 0°C  (c) a temperature of 273 °K  (d) a negative pressure and 0°C temperature  (e) can’t be attained.

Description : The condition of perfect vacuum, i.e., absolute zero pressure can be attained at  (a) a temperature of – 273.16°C  (b) a temperature of 0°C  (c) a temperature of 273 °K  (d) a negative pressure and 0°C temperature  (e) can’t be attained.

Last Answer : Answer : a

The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Description : The gas in a constant gas thermometer cooled to absolute zero would have _________.  a. no volume  b. no pressure  c. zero temperature at all scales  d. none of the above

Last Answer : no pressure