Description : Isochoric process is one in which (a) free expansion takes place (b) very little mechanical work is done by the system (c) no mechanical work is done by the system (d) all parameters remain constant
Last Answer : Answer : c
Description : Work done is zero for the following process (a) constant volume (b) free expansion (c) throttling (d) all Of the above (e) none of the above.
Last Answer : Answer : d
Description : Which of the following occurs in a reversible polytrophic process? a. Enthalpy remains constant b. Internal energy does not change c. Some heat transfer occurs d. Entropy remains constant
Last Answer : Some heat transfer occurs
Description : Gas being heated at constant volume is undergoing the process of. a. isometric b. specific heat c. enthalpy d. isothermal
Last Answer : isometric
Description : Change in enthalpy in a closed system is equal to heat transferred if the reversible process takes place at constant (a) pressure (b) temperature (c) volume (d) internal energy (e) entropy.
Last Answer : Answer : a
Description : According to first law of thermodynamics (a) work done by a system is equal to heat transferred by the system (b) total internal energy of a system during a process remains constant ( ... , enthalpy and entropy during a process remain constant (d) total energy of a system remains constant
Description : If value of n is infinitely large in a polytropic process pV” = C, then the process is known as constant (a) volume (b) pressure (c) temperature (d) enthalpy (e) entropy
Description : A process, in which the temperature of the working substance remains constant during its expansion or compression, is called A. isothermal process B. hyperbolic process C. adiabatic process D. polytropic process
Last Answer : Answer: A
Description : Which of the following processes are thermodynamically reversible (a) throttling (b) free expansion (c) constant volume and constant pressure (d) hyperbolic and pV = C (e) isothermal and adiabatic.
Last Answer : Answer : e
Description : What happens to the internal energy of water at reference temperature where enthalpy is zero? a. Becomes negative b. Becomes positive c. Remains constant d. Cannot be defined
Last Answer : Becomes negative
Description : _____ is that property of a substance which remains constant if no heat enters or leaves the substance, while it does work or alters its volume, but which increases or diminishes should a small amount of heat enter or leave. a. Entrophy b. Enthalpy c. Specific Heat d. None of the above
Last Answer : Entrophy
Description : What is the energy absorbed during chemical reaction under constant volume conditions? A. Entropy B. Ion exchange C. Enthalpy D. Enthalpy of reaction
Last Answer : Enthalpy
Description : Change in enthalpy of a system is the heat supplied at (a) constant pressure (b) constant temperature (c) constant volume (d) constant entropy (e) N.T.P. condition.
Description : Which of the following parameters is constant for a mole for most of the gases at a given temperature and pressure (a) enthalpy (b) volume (c) mass (d) entropy (e) specific volume.
Last Answer : Answer : b
Description : The universal gas constant of a gas is the product of molecular mass of the gas and the gas constant. A. Correct B. Incorrect
Description : Which of the following relations is not applicable in a free expansion process? a. Heat is rejected to zero b. Work done is zero c. Change in temperature is zero d. Heat supplied is zero
Last Answer : Change in temperature is zero
Description : The free expansion process is __________ non-flow process. A. reversible B. irreversible
Last Answer : Answer: B
Description : Workdone in a free expansion process is A.zero B.minimum C.maximum D.positive
Description : In order that a cycle be reversible, following must be satisfied (a) free expansion or friction resisted expansion/compression process should not be encountered (b) when heat is being absorbed, temperature of hot ... sub-stance should be same (d) all of the above (e) none of the above.
Description : If a fluid expands suddenly into vacuum through an orifice of large dimension, then such a process is called (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Description : If a gas vapour is allowed to expand through a very minute aperture, then such a process is known as (a) free expansion (b) hyperbolic expansion (c) adiabatic expansion (d) parabolic expansion (e) throttling.
Description : In a free expansion process (a) work done is zero (b) heat transfer is zero (c) both (a) and (b) above (d) work done is zero but heat increases (e) work done is zero but heat decreases.
Description : The value of n = 1 in the polytropic process indicates it to be (a) reversible process (b) isothermal process (c) adiabatic process (d) irreversible process (e) free expansion process.
Description : Work done in a free expansion process is (a) + ve (b) -ve (c) zero (d) maximum (e) minimum.
Description : Otto cycle efficiency is higher than Diesel cycle efficiency for the same compression ratio and heat input because in Otto cycle A. combustion is at constant volume B. expansion and compression are isentropic C. maximum temperature is higher D. heat rejection is lower
Last Answer : Answer: D
Description : Which of the following values characterize the state of the system? a. cycle b. process c. property d. enthalpy
Last Answer : enthalpy
Description : The change that the system that undergoes from one equilibrium state to another is known as a. oath b. process c. enthalpy change d. entropy change
Last Answer : process
Description : A state occurs in isentropic process a. The change in entropy is 0 b. The change in entropy is 1 c. The change in enthalpy is 0 d. The change in enthalpy is 1
Last Answer : The change in entropy is 0
Description : Regardless of the process, the change in enthalpy firm moles of ideal gas is a. Heat b. Enthalpy c. Entropy d. Density
Last Answer : Heat
Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process? a) 97.6%,2713 kJ/kg b) -97.6%, 2713 kJ/kg c) 87.6%,3713 kJ/kg d) -87.6%, 3713 kJ/kg
Last Answer : 97.6%,2713 kJ/kg
Description : An adiabatic process in which there is no change in system enthalpy but for which there is a significant decrease in pressure is called _____. A. Isochoric process B. Isobaric process C. Throttling process D. Quasistatic process
Last Answer : Throttling process
Description : In an isothermal process, A. there is no change in temperature B. there is no change in enthalpy C. there is no change in internal energy D. all of these
Description : There is no change in internal energy in an isothermal process. A. Correct B. Incorrect
Description : When the expansion of compression of gas takes place without transfer of heat to or from the gas the process is called a. reversible b. adiabatic c. polytropic d. isothermal
Last Answer : adiabatic
Description : When the expansion of compression of gas takes place without transfer of heat or from the gas the process is called; a. Isometric process b. Isothermal process c. Isobaric process d. Adiabatic process
Last Answer : Adiabatic process
Description : During which of the following process does heat rejection takes place in Carnot cycle? A. Isothermal expansion B. Isentropic expansion C. Isothermal compression D. Isentropic compression
Last Answer : Answer: C
Description : Which of the following is the other term used for enthalpy-entropy diagram? a. Enthalpy diagram b. Mollier diagram c. Steam diagram d. Entropy chart
Last Answer : Mollier diagram
Description : Entropy is the measure of: a. The internal energy of a gas b. The heat capacity of a substance c. Randomness or disorder d. The change of enthalpy of a system
Last Answer : Randomness or disorder
Description : An ideal gas is compresses isothermally. The enthalpy change is a. Always negative b. Always positive c. zero d. undefined
Last Answer : zero
Description : Burning of Gasoline initially requires heat before it burns spontaneously. Which of the following does not give a good explanation of this phenomenon? a. the initial heat rises the enthalpy of the reactant ... of products. d. The enthalpy of the product is lower than the enthalpy of the reactant
Last Answer : the enthalpy of reactants is lower than the enthalpy of products.
Description : What is the measure of the energy that is no longer available to perform useful work within the current environment? a. enthalpy b. entropy c. internal energy d. latent heat
Last Answer : entropy
Description : What is known as the total heat and heat content at various times in the history? a. enthalpy b. entropy c. internal energy d. latent heat
Description : Sum of the internal energy of a substance and the product of pressure and volume. a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Description : A system having a rigid boundary that energy, work and mass does not cross its boundaries a. Specific Heat b. Specific Gravity c. Isolated System d. Enthalpy
Last Answer : Isolated System
Description : The 1st Law of Thermodynamics on what principle? a. Conservation of Energy b. Conservation of mass c. Enthalpy d. Isometric
Last Answer : Conservation of Energy
Description : Composite property applicable to all fluids a. Entropy b. Enthalpy c. Specific Heat d. None of the above
Description : Steam at 1000 lbf/ft^2 pressure and 300˚R has specific volume of 6.5 ft^3/lbm and a specific enthalpy of 9800 lbf-ft/lbm. Find the internal energy per pound mass of steam. A.2500 lbf-ft/lbm B.3300 lbf-ft/lbm C.5400 lbf-ft/lbm D.6900 lbf-ft/lbm Formula: h= u+ pV u= h– pV
Last Answer : 3300 lbf-ft/lbm
Description : The first law of thermodynamics is based on which of the following principles? a. conservation of mass b. the enthalpy-entropy relationship c. action – reaction d. conservation of energy
Last Answer : conservation of energy
Description : A function of state that is associated with disorder in the system and environment. a. enthalpy b. entropy c. law of diminishing return d. Lenz’ Law
Description : What predicts the approximate molar specific heat at high temperatures from the atomic weight? A. Third law of thermodynamics B. Law of Dulong and Petit C. Mollier diagram D. Pressure-enthalpy diagram
Last Answer : Law of Dulong and Petit