Description : Combustion of which fuels from following is source of heat for boiler 1. Wood 2. Coal 3. Oil 4. All of above
Last Answer : 4. All of above
Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above
Last Answer : c. Steam boiler
Description : Boiler works from application of which type of energies 1. Fuel combustion 2. Electricity 3. Nuclear energy 4. All of above
Description : Presence of moisture in fuel oil would (A) Keep the burner tips cool (B) Aid in proper combustion (C) Because sputtering, possibly extinguishing flame (D) Clean the nozzles
Last Answer : (D) Clean the nozzles
Description : The economiser is used in boilers to........ A]Increase thermal efficiency of boiler B]Economise on fuel C]Extract heat from the exhaust the gases D]Increase flue gas temperature
Last Answer : A]Increase thermal efficiency of boiler
Description : Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above
Last Answer : c) Combustion
Description : Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above
Last Answer : • All of the above
Description : A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above
Last Answer : c. Combustion, transfers
Description : Based on the exhaust gas analysis, a controller maintains stoichiometric combustion __ a. by commanding a servo motor to adjust the combustion air damper b. By commanding servo motor to adjust the fuel supply valve. c. Both a. & b. d. None of the above.
Last Answer : c. Both a. & b.
Description : Oxygen trim control strategy __ a. continuously measures the oxygen content in the flue gas b. adjusts the combustion air flow c. Continually tuning the air-fuel mixture. d. All of above
Last Answer : d. All of above
Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure
Last Answer : • To generate steam at constant pressure
Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None
Last Answer : • Boiler
Description : A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None
Last Answer : a. Boiler, generate
Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None
Last Answer : B Boiler
Description : Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above
Last Answer : A Chemical energy
Description : An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure
Last Answer : C]Decreases fuel consumption
Description : The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon
Last Answer : b) Dry flue gases
Description : Combustion is the ideal air/fuel ratio where a. the mixing proportion is correct, b. the fuel is completely burned c. the oxygen is entirely consumed d. All of the above
Last Answer : d. All of the above
Description : A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above
Last Answer : • Water
Description : Use of ______ is prohibited in process boilers. a. Use of a common gas b. combustion air control linkage c. jack shaft d. All of the above
Description : A device known as a _______ is used to release condensate from the pipework whilst preventing the steam from escaping from the system. a. Steam traps b. Steam pipes c. Boiler nose d. Release valve
Last Answer : a. Steam traps
Description : The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None
Last Answer : a. Steam
Description : What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity
Last Answer : c. Formation of bubbles
Description : Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler
Last Answer : d. Outside the boiler
Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam
Last Answer : a. Saturated steam
Description : In which year was Lamont boiler invented? a. 1905 b. 1910 c. 1920 d. 1925
Last Answer : d. 1925
Description : What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar
Last Answer : b. 120-160 bar
Description : Through which does the even circulation of water is possible in Lamont boiler ? a. Nozzles b. Water trough c. Feed pump d. Hose
Last Answer : a. Nozzles
Description : In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined
Last Answer : c. Parallel in horizontal
Description : Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump
Last Answer : b. Economizer
Description : What is called as the heart of the Lamont boiler? a. Water drum b. Centrifugal pump c. Furnace d. Blower
Last Answer : b. Centrifugal pump
Description : Type of Lamont boiler is_______ a. Forced circulation b. Natural circulation c. Over-through d. Positive forced circulation
Last Answer : a. Forced circulation
Description : The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement
Last Answer : d) Caustic embrittlement
Description : Which of the following option is incorrect about the sludges? a) Sludges are soft, loose and slimy precipitate b) They are non-adherent deposits and can be easily removed c) Formed generally at heated portions of the boiler d) Can be removed by blow down operation
Last Answer : c) Formed generally at heated portions of the boiler
Description : Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement
Last Answer : b) Decomposition
Description : The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these
Last Answer : (B) Less than
Description : The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases
Last Answer : (B) Decreases
Description : Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.
Last Answer : • Boiler can pressurize the water and can also evaporate it.
Description : Which of the following is not a type of boiler? • Fire tube boiler • Water tube boiler • Cast iron boiler • Hot water boiler
Last Answer : • Hot water boiler
Description : Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator
Description : If the water level inside the boiler were not carefully control cased… a) explosion b) overheat and fail c) both a) & b) d) None of above
Last Answer : c) both a) & b)
Description : Water that is fed back to the boiler by the pump is called? a. Absorber b. Absolute c. Compressor d. Condensate
Last Answer : d. Condensate
Description : Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler
Last Answer : • Babcock Wilcox boiler
Description : Cornish boiler is an example of which types of boiler? • Fire tube boiler • Water tube boiler • Vertical tube boiler • Extremally fired boiler
Last Answer : • Fire tube boiler
Description : Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency
Last Answer : • For better turbine control
Description : In what is water in high pressure boiler circulated through? • Conduits • Cove • Channel • Tubes
Last Answer : • Tubes
Description : What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity
Last Answer : • Density
Description : What is the temperature at which the steam boiler are capable to withstand • 200°C • 280°C • 540°C • 358°C
Last Answer : • 540°C
Description : Boiler water pH refers to a quantitative figure that expresses the acidity or alkalinity of boiler water. Ideally it should be between • 8.5 to 9.5 • 7.5 to 8.5 • 9.5 to 10.5
Last Answer : • 8.5 to 9.5
Description : The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None
Last Answer : • Steam