Which of the following is not a result of the excess of impurity in boiler-feed. a) Scale and sludge formation b) Decomposition c) Corrosion, priming and foaming d) Caustic embrittlement

Which of the following is not a result of the excess of impurity in boiler-feed.
a) Scale and sludge formation
b) Decomposition
c) Corrosion, priming and foaming
d) Caustic embrittlement
by

1 Answer

Answer :

b) Decomposition
by

Related questions

The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : d) Caustic embrittlement

The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The propulsion of water into steam drum by extremely rapid, almost explosive boiling of water at the heating surface is called ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : b) Priming

Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement

Description : Deaeration of high pressure boiler feed water is done to reduce (A) Foaming from boilers (B) Its dissolved oxygen content (C) Its silica content (D) Caustic embrittlement

Last Answer : (B) Its dissolved oxygen content

Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Description : Foaming and priming in boiler operation can be reduced by reduction in __________ in feed water. (A) Turbidity (B) Color (Hazen) (C) Total solids (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water(B) Cooling and freezing of water kills the bacteria present in it(C) With increasing boiler operating pressure of steam, the maximumallowable concentration of silica in feed water goes on decreasing(D) Dissolved oxygen content in high pressure boiler feed water should benil

Description : Pick out the wrong statement. (A) Caustic embrittlement of boiler's metallic parts is caused by highconcentration of caustic soda in boiler feed water (B) Cooling and freezing of water kills the ... goes on decreasing (D) Dissolved oxygen content in high pressure boiler feed water should be nil

Last Answer : (B) Cooling and freezing of water kills the bacteria present in it

Foaming is caused by the formation of ___________ a) Acids b) Alcohols c) Oils and alkalis d) Ketones

Description : Foaming is caused by the formation of ___________ a) Acids b) Alcohols c) Oils and alkalis d) Ketones

Last Answer : c) Oils and alkalis

Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Which of the following is an example of stress corrosion? (A) Season cracking of brass (B) Caustic embrittlement of steel (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : Option C

Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler

Description : Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler

Last Answer : d. Outside the boiler

Through which does the even circulation of water is possible in Lamont boiler ? a. Nozzles b. Water trough c. Feed pump d. Hose

Description : Through which does the even circulation of water is possible in Lamont boiler ? a. Nozzles b. Water trough c. Feed pump d. Hose

Last Answer : a. Nozzles

Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Description : Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Last Answer : b. Economizer

Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Description : Tri-sodium phosphate is used in boiler water treatment to reduce (A) Turbidity (B) Caustic embrittlement (C) Suspended silica (D) Dissolved oxygen

Last Answer : (B) Caustic embrittlement

The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during feed water treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Description : The most prominent single cause of corrosion in boiler-tubes, drums, economisers and steam superheaters in a thermal power plant boiler is the (A) Water alkalinity & leakage (B) Hydrazine addition during ... treatment (C) Release of non-condensable gas from water in the boiler (D) Scale formation

Last Answer : (C) Release of non-condensable gas from water in the boiler

What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Description : What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Last Answer : c. Formation of bubbles

The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon

Description : The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon

Last Answer : b) Dry flue gases

Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Description : Find false statement about effect of sulphur in fuel? (A) It has heating value (B) It helps in electrostatic precipitation of ash in flue gases (C) It leads to corrosion of air heaters, ducting, etc. if flue gas exit temperature is low (D) It erodes furnace walls

Last Answer : (D) It erodes furnace walls

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

In which year was Lamont boiler invented? a. 1905 b. 1910 c. 1920 d. 1925

Description : In which year was Lamont boiler invented? a. 1905 b. 1910 c. 1920 d. 1925

Last Answer : d. 1925

What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Description : What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Last Answer : b. 120-160 bar

In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Description : In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Last Answer : c. Parallel in horizontal

What is called as the heart of the Lamont boiler? a. Water drum b. Centrifugal pump c. Furnace d. Blower

Description : What is called as the heart of the Lamont boiler? a. Water drum b. Centrifugal pump c. Furnace d. Blower

Last Answer : b. Centrifugal pump

Type of Lamont boiler is_______ a. Forced circulation b. Natural circulation c. Over-through d. Positive forced circulation

Description : Type of Lamont boiler is_______ a. Forced circulation b. Natural circulation c. Over-through d. Positive forced circulation

Last Answer : a. Forced circulation

Combustion of which fuels from following is source of heat for boiler 1. Wood 2. Coal 3. Oil 4. All of above

Description : Combustion of which fuels from following is source of heat for boiler 1. Wood 2. Coal 3. Oil 4. All of above

Last Answer : 4. All of above

Boiler works from application of which type of energies 1. Fuel combustion 2. Electricity 3. Nuclear energy 4. All of above

Description : Boiler works from application of which type of energies 1. Fuel combustion 2. Electricity 3. Nuclear energy 4. All of above

Last Answer : 4. All of above

Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above

Description : Boiler is a enclosed vessel that provides a) Expansion b) Ignition c) Combustion d) None of the above

Last Answer : c) Combustion

Which of the following option is incorrect about the sludges? a) Sludges are soft, loose and slimy precipitate b) They are non-adherent deposits and can be easily removed c) Formed generally at heated portions of the boiler d) Can be removed by blow down operation

Description : Which of the following option is incorrect about the sludges? a) Sludges are soft, loose and slimy precipitate b) They are non-adherent deposits and can be easily removed c) Formed generally at heated portions of the boiler d) Can be removed by blow down operation

Last Answer : c) Formed generally at heated portions of the boiler

The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Description : The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Last Answer : (B) Less than

The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Description : The relative heat absorption for successively added equal areas of boiler convection heating surfaces__________ (A) Increases (B) Decreases (C) Remain unaffected (D) First increases and then decreases

Last Answer : (B) Decreases

Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.

Description : Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.

Last Answer : • Boiler can pressurize the water and can also evaporate it.

Which of the following is the combustion accessory of a boiler? • Fuel oil system • Gas system • Coal system • All of the above

Description : Which of the following is the combustion accessory of a boiler? • Fuel oil system • Gas system • Coal system • All of the above

Last Answer : • All of the above

Which of the following is not a type of boiler? • Fire tube boiler • Water tube boiler • Cast iron boiler • Hot water boiler

Description : Which of the following is not a type of boiler? • Fire tube boiler • Water tube boiler • Cast iron boiler • Hot water boiler

Last Answer : • Hot water boiler

A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Description : A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Last Answer : • Water

Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator

Description : Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator

Last Answer : • Boiler

If the water level inside the boiler were not carefully control cased… a) explosion b) overheat and fail c) both a) & b) d) None of above

Description : If the water level inside the boiler were not carefully control cased… a) explosion b) overheat and fail c) both a) & b) d) None of above

Last Answer : c) both a) & b)

Water that is fed back to the boiler by the pump is called? a. Absorber b. Absolute c. Compressor d. Condensate

Description : Water that is fed back to the boiler by the pump is called? a. Absorber b. Absolute c. Compressor d. Condensate

Last Answer : d. Condensate

A device known as a _______ is used to release condensate from the pipework whilst preventing the steam from escaping from the system. a. Steam traps b. Steam pipes c. Boiler nose d. Release valve

Description : A device known as a _______ is used to release condensate from the pipework whilst preventing the steam from escaping from the system. a. Steam traps b. Steam pipes c. Boiler nose d. Release valve

Last Answer : a. Steam traps

Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler

Description : Which of these is a stationary boiler? • Locomotive boiler • Marine boiler • Mobile boiler • Babcock Wilcox boiler

Last Answer : • Babcock Wilcox boiler

Cornish boiler is an example of which types of boiler? • Fire tube boiler • Water tube boiler • Vertical tube boiler • Extremally fired boiler

Description : Cornish boiler is an example of which types of boiler? • Fire tube boiler • Water tube boiler • Vertical tube boiler • Extremally fired boiler

Last Answer : • Fire tube boiler

Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency

Description : Why single boiler unit per turbine is equipped commonly? • For better turbine control • To reduce the cost • For overcoming losses of power • To improve the efficiency

Last Answer : • For better turbine control

In what is water in high pressure boiler circulated through? • Conduits • Cove • Channel • Tubes

Description : In what is water in high pressure boiler circulated through? • Conduits • Cove • Channel • Tubes

Last Answer : • Tubes

What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Description : What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Last Answer : • Density

What is the temperature at which the steam boiler are capable to withstand • 200°C • 280°C • 540°C • 358°C

Description : What is the temperature at which the steam boiler are capable to withstand • 200°C • 280°C • 540°C • 358°C

Last Answer : • 540°C

What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Last Answer : • To generate steam at constant pressure

Boiler water pH refers to a quantitative figure that expresses the acidity or alkalinity of boiler water. Ideally it should be between • 8.5 to 9.5 • 7.5 to 8.5 • 9.5 to 10.5

Description : Boiler water pH refers to a quantitative figure that expresses the acidity or alkalinity of boiler water. Ideally it should be between • 8.5 to 9.5 • 7.5 to 8.5 • 9.5 to 10.5

Last Answer : • 8.5 to 9.5

Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Description : Basic Parts of a Boiler. Burner, • the combustion chamber, • the heat exchanger • All of the above

Last Answer : • All of the above

The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Description : The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Last Answer : • Steam

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Last Answer : • Boiler

Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Description : Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Last Answer : d. All of above

A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Description : A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Last Answer : c. Combustion, transfers

A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Description : A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Last Answer : a. Boiler, generate

The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Description : The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Last Answer : a. Steam