A device known as a _______ is used to release condensate from the pipework whilst preventing the steam from escaping from the system. a. Steam traps b. Steam pipes c. Boiler nose d. Release valve

A device known as a _______ is used to release condensate from the pipework whilst preventing the steam from escaping from the system.
a. Steam traps
b. Steam pipes
c. Boiler nose
d. Release valve
by

1 Answer

Answer :

a. Steam traps
by

Related questions

A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Description : A __________ is a type of heat exchange system where water is heated to its' boiling point via combustion of a fuel blown through a tube submerged in water. a. Condensate loop b. Hyperbolic cooling tower c. Steam boiler d. All of above

Last Answer : c. Steam boiler

____________is used to release condensate in pipe work a) steam trap b) valves c) power generators d) none of above

Description : ____________is used to release condensate in pipe work a) steam trap b) valves c) power generators d) none of above

Last Answer : b) valves

The _______ system includes anywhere that the steam condenses to form liquid water. a. Loop b. Power c. Liquid d. Condensate

Description : The _______ system includes anywhere that the steam condenses to form liquid water. a. Loop b. Power c. Liquid d. Condensate

Last Answer : d. Condensate

Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator

Description : Once the condensate reaches the _____ , it becomes available to the boiler for recycling. • Condenser • Turbine • Boiler • Generator

Last Answer : • Boiler

Water that is fed back to the boiler by the pump is called? a. Absorber b. Absolute c. Compressor d. Condensate

Description : Water that is fed back to the boiler by the pump is called? a. Absorber b. Absolute c. Compressor d. Condensate

Last Answer : d. Condensate

The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Description : The heat produced in this system is then rejected into the system as _______ a. Steam b. Boiler c. Both a & b d. None

Last Answer : a. Steam

Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Description : Steam condensate is recovered by steam traps and recycled for use as boiler feed water, because of its low (A) Hardness (B) Dissolved solids content (C) Suspended solids content (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A steam and condensate system represents a _____ loop. • Discontinuous • Continuous • None of the above • All of the above

Description : A steam and condensate system represents a _____ loop. • Discontinuous • Continuous • None of the above • All of the above

Last Answer : • Continuous

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. • Steam • Boiler • Hydrogen • None

Last Answer : • Boiler

A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None

Description : A _______ incorporates a firebox or furnace in order to burn the fuel and generate heat. A Steam B Boiler C Hydrogen D None

Last Answer : B Boiler

Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above

Description : Boiler efficiency is a measure of how effectively _______ energy in fuel is converted into heat energy in steam going to the turbines A Chemical energy B Heat energy C Thermal energy D All of the above

Last Answer : A Chemical energy

A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Description : A boiler or steam generator is a device used to create steam by applying heat energy to _____. • Water • Petrol • Oil • All of the above

Last Answer : • Water

A boiler is a device used to create steam by applying __________to water a) Light energy b) heat energy c) Wind energy d) mechanical energy

Description : A boiler is a device used to create steam by applying __________to water a) Light energy b) heat energy c) Wind energy d) mechanical energy

Last Answer : b) heat energy

when steam is condensate volume is drastically……. a) reduces b) increase c) both a) & b) d) None of above

Description : when steam is condensate volume is drastically……. a) reduces b) increase c) both a) & b) d) None of above

Last Answer : a) reduces

Condensate is the liquid formed when steam passes from the ________ to the ______ state. a. Vapor, solid b. Solid, liquid c. Vapor, liquid d. None

Description : Condensate is the liquid formed when steam passes from the ________ to the ______ state. a. Vapor, solid b. Solid, liquid c. Vapor, liquid d. None

Last Answer : c. Vapor, liquid

Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Description : Steam traps are provided in steam carrying pipelines to (A) Condense steam (B) Release excess steam pressure by bleeding steam (C) Remove condensate and inert gases (D) None of these

Last Answer : (C) Remove condensate and inert gases

What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Description : What is the function of boiler? • To burn the fuel in a confined closed system With the supply of air • To generate steam in varying pressure • To generate steam at constant pressure • To produce flue gases by burning fuel at a given pressure

Last Answer : • To generate steam at constant pressure

What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Description : What is the main disadvantage of Lamont boiler ? a. Less flexible in design b. Low heat transfer rate c. Formation of bubbles d. Low steam generation capacity

Last Answer : c. Formation of bubbles

Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler

Description : Where is water steam separator drum located in Lamont boiler ? a. Inside of the boiler b. Right above the furnace c. Before the feed water pump d. Outside the boiler

Last Answer : d. Outside the boiler

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Description : Through what is feed water from hot-well is passed through, before entering steam and water drum in Lamont boiler? a. Evaporator tubes b. Economizer c. Distributor header d. Circulating pump

Last Answer : b. Economizer

The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Description : The pressure of steam in the engine cylinder at the beginning of the stroke is ________ the boiler pressure. (A) Equal to (B) Less than (C) Higher than (D) None of these

Last Answer : (B) Less than

Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.

Description : Find the wrong statement. • Boiler is used to produce electricity in the energy business. • Boiler is used to produce steam for generating electricity. • Boiler can pressurize the water and can also evaporate it. All are wrong.

Last Answer : • Boiler can pressurize the water and can also evaporate it.

What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Description : What increase as steam pressure increase inside a boiler • Force • Density • Rate of steam conversion • Viscosity

Last Answer : • Density

What is the temperature at which the steam boiler are capable to withstand • 200°C • 280°C • 540°C • 358°C

Description : What is the temperature at which the steam boiler are capable to withstand • 200°C • 280°C • 540°C • 358°C

Last Answer : • 540°C

The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Description : The generated heat is transferred to water to make ______ the process of boiling. • Steam • Boiler • Both • None

Last Answer : • Steam

Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Description : Steam produced in a boiler can be used for a variety of purposes including space heating, drying and _________________ a. Sterilization b. Humidification c. Power generation d. All of above

Last Answer : d. All of above

A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Description : A boiler is an enclosed vessel that provides a means for ________ and ______ heat to water until it becomes hot water or steam. a. Generate, boiler b. Condenser, loop c. Combustion, transfers d. All of above

Last Answer : c. Combustion, transfers

A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Description : A -________ incorporates a firebox or furnace in order to burn the fuel and _________ heat. a. Boiler, generate b. Heat, boiler c. Steam, pressure d. None

Last Answer : a. Boiler, generate

What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Description : What is the main component in a boiler a) steam b) heat c) pressure condenser d) combination

Last Answer : a) steam

The heat in the boiler is used for making ______ a) steam b) condensing process c) ice d) none of these

Description : The heat in the boiler is used for making ______ a) steam b) condensing process c) ice d) none of these

Last Answer : a) steam

What is the temperature at which the steam boiler are Capable to withstand a. 200°C b. 280°C c. 540°C d. 358°C

Description : What is the temperature at which the steam boiler are Capable to withstand a. 200°C b. 280°C c. 540°C d. 358°C

Last Answer : c. 540°C

Which of the following boiler is best suited to meet the fluctuating demand of steam....... A locomotive boiler. B Lancashire boiler C Cornish boiler D Babcock and wilcox boiler

Description : Which of the following boiler is best suited to meet the fluctuating demand of steam....... A locomotive boiler. B Lancashire boiler C Cornish boiler D Babcock and wilcox boiler

Last Answer : A locomotive boiler.

An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Description : An economiser in a boiler........ A]Increases steam pressure. B]Increases steam flow C]Decreases fuel consumption D]Decreases steam pressure

Last Answer : C]Decreases fuel consumption

Which of the following boiler is best suited to meet the fluctuating demand of steam....... A]Locomotive boiler. B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Description : Which of the following boiler is best suited to meet the fluctuating demand of steam....... A]Locomotive boiler. B]Lancashire boiler C]Cornish boiler D]Babcock and wilcox boiler

Last Answer : A]Locomotive boiler.

The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon

Description : The biggest loss in the boiler is a) Moisture in fuel b) Dry flue gases c) Steam formation d) Unburnt carbon

Last Answer : b) Dry flue gases

A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Description : A safety valve usually employed with stationary boilers is (A) Lever safety valve (B) Dead weight safety valve (C) High steam and low water safety valve (D) All of these

Last Answer : (D) All of these

The diameter of internal flue tubes of a Lancashire boiler is about _______ that of it’s shell a. One fourth b. One third c. Two fifth d. One half

Description : The diameter of internal flue tubes of a Lancashire boiler is about _______ that of it’s shell a. One fourth b. One third c. Two fifth d. One half

Last Answer : c. Two fifth

The diameter of fine tubes in Cochran boiler is of order of _______ a. 2cm b. 6cm c. 8cm d. 15cm

Description : The diameter of fine tubes in Cochran boiler is of order of _______ a. 2cm b. 6cm c. 8cm d. 15cm

Last Answer : b. 6cm

The water tubes in a simple vertical boiler are _______ a. Horizontal b. Vertical c. Inclined d. All of the above

Description : The water tubes in a simple vertical boiler are _______ a. Horizontal b. Vertical c. Inclined d. All of the above

Last Answer : c. Inclined

The back pressure created by lift is approximately ______PSIG for every 2 feet of condensate lift. a. 1 PSIG b. 3PSIG c. 1PSGI d. 3PSGI

Description : The back pressure created by lift is approximately ______PSIG for every 2 feet of condensate lift. a. 1 PSIG b. 3PSIG c. 1PSGI d. 3PSGI

Last Answer : a. 1 PSIG

Which cooling Towers use a process similar to the one found in small evaporation active cooling units a) hyperbolic b) Tower c) condensate loop d) none of these

Description : Which cooling Towers use a process similar to the one found in small evaporation active cooling units a) hyperbolic b) Tower c) condensate loop d) none of these

Last Answer : a) hyperbolic

What happens when air dissolves in condensate? a) non corrosive b) temperature of air increases c) corrosive d) none of above

Description : What happens when air dissolves in condensate? a) non corrosive b) temperature of air increases c) corrosive d) none of above

Last Answer : c) corrosive

The term _________ is traditionally used to describe steam issuing from condensate receiver vents and openended condensate discharge lines from steam traps.  a. dry steam  b. wet steam  c. phase steam  d. flash steam

Description : The term _________ is traditionally used to describe steam issuing from condensate receiver vents and openended condensate discharge lines from steam traps.  a. dry steam  b. wet steam  c. phase steam  d. flash steam

Last Answer : flash steam

The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Description : The phenomenon during which the boiler material becomes brittle due to accumulation of caustic substances is known as ___________ a) Foaming b) Priming c) Corrosion d) Caustic embrittlement

Last Answer : d) Caustic embrittlement

Which of the following is the combustion accessory of a boiler? • Fuel oil system • Gas system • Coal system • All of the above

Description : Which of the following is the combustion accessory of a boiler? • Fuel oil system • Gas system • Coal system • All of the above

Last Answer : • All of the above

In which year was Lamont boiler invented? a. 1905 b. 1910 c. 1920 d. 1925

Description : In which year was Lamont boiler invented? a. 1905 b. 1910 c. 1920 d. 1925

Last Answer : d. 1925

What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Description : What is the pressure range between which Lamont boiler operator ? a. 80-120 bar b. 120-160 bar c. 180-360 bar d. 450-560 bar

Last Answer : b. 120-160 bar

Through which does the even circulation of water is possible in Lamont boiler ? a. Nozzles b. Water trough c. Feed pump d. Hose

Description : Through which does the even circulation of water is possible in Lamont boiler ? a. Nozzles b. Water trough c. Feed pump d. Hose

Last Answer : a. Nozzles

In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Description : In what form are the boiler tube arrange in Lamont boiler ? a. Parallel in vertical b. Inclined vertically c. Parallel in horizontal d. Horizontally inclined

Last Answer : c. Parallel in horizontal