An iron cored inductance coil can be modelled, over a normal operating range of networks ,as

An iron cored inductance coil can be modelled, over a normal operating range of networks ,as

A) non-Linear bilateral element

B) linear bilateral element

C) linear time varying element

D) non-linear time invariant element
by

1 Answer

Answer :

An iron cored inductance coil can be modelled, over a normal operating range of networks ,as linear bilateral element

by

Related questions

The effective resistance of an iron-cored choke working on ordinary supply frequency...

Description : The effective resistance of an iron-cored choke working on ordinary supply frequency is more than its true resistance because of?

Last Answer : The effective resistance of an iron-cored choke working on ordinary supply frequency is more than its true resistance because of iron loss in core.

In transformer, alternating current is induced inA. primary coilB. secondary coilC. iron coreD. resistor

Description : In transformer, alternating current is induced inA. primary coil B. secondary coil C. iron core D. resistor

Last Answer : primary coil

An open coil in a transformer will be indicated by which of the listed conditions? A. 'zero' resistance accompanied by high inductance B. no resistance accompanied by stray inductance C. infinite resistance in addition to no inductance D. infinite resistance in addition to normal inductance

Description : An open coil in a transformer will be indicated by which of the listed conditions? A. 'zero' resistance accompanied by high inductance B. no resistance accompanied by stray inductance C. infinite resistance in addition to no inductance D. infinite resistance in addition to normal inductance

Last Answer : Answer: C

A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Description : A coil of 500 turns is linked with a flux of 25 mwb, when carries a current of 12.5A. Calculate the value of self-inductance.

Last Answer : Ans: Self-Inductance: L = NΦ /I = 500 × 25 × 10-3 / 12.5 = 1 H

lt the length, number of turns and area of a coil are doubled, the inductance of the coil

Description : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil

Last Answer : lt the length, number of turns and area of a coil are  doubled, the inductance of the coil is quadrupled

A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V,

Description : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum when the supply frequency is 1 kHz. The ... (A) 40, 400 Hz (B) 10, 100 Hz (C) 20, 50 Hz (D) 50, 20 Hz

Last Answer : A coil of inductance 240 mH and resistance 75 Ohm is connected in parallel with a capacitor across a 30 V, variable frequency supply. The current drawn by the circuit is found to be minimum ... supply frequency is 1 kHz. The approximate values of Q-factor and bandwidth are, respectively 20, 50 Hz

What is the value of Inductance of a coil that induces 20 V when the current through the coil changes from...

Description : What is the value of Inductance of a coil that induces 20 V when the current through the coil changes from 12 to 20 A in 2 seconds? A. 2 H B. 3 H C. 4 H D. 5 H 

Last Answer : 5 H is the value of Inductance of a coil that induces 20 V when the current through the coil changes from 12 to 20 A in 2 seconds.

The initial rate of rise of current through a coil of inductance 10 H when suddenly...

Description : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is_______Vs.

Last Answer : The initial rate of rise of current through a coil of inductance 10 H when suddenly connected to a D.C. supply of 200 V is 20 Vs

When both the inductance and resistance of a coil are doubled the value of?

Description : When both the inductance and resistance of a coil are doubled the value of?

Last Answer : When both the inductance and resistance of a coil are doubled the value of time constant remains unchanged.

The inductance of a coil can be increased by?

Description : The inductance of a coil can be increased by?

Last Answer : The inductance of a coil can be increased by choosing core material having high relative permeability.

Inductance of coil?

Description : Inductance of coil?

Last Answer : Inductance of coil increases with the increase in supply frequency.

Inductance of a coil Varies?

Description : Inductance of a coil Varies?

Last Answer : Inductance of a coil Varies as directly as the cross-sectional area of magnetic core and inversely as the length of the iron path.

when should I harvest red cored chantenay carrots

Description : when should I harvest red cored chantenay carrots

Last Answer : Need Answer

The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above

Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above

Last Answer : (c) mild steel

Which of the following materials is used for overhead transmission lines ? (a) Steel cored aluminium (b) Galvanised steel (c) Cadmium copper (d) Any of the above

Description : Which of the following materials is used for overhead transmission lines ? (a) Steel cored aluminium (b) Galvanised steel (c) Cadmium copper (d) Any of the above

Last Answer : (d) Any of the above

A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Description : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance of `10Omega` is connected parallel to the

Last Answer : A coil =of inductance `L=50muH` and resistance =`0.5Omega` is connected to a battery of emf=5A. A resistance ... is (0.02)x in mJ. Find valuie of x.

Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I=I_(0) sin omegat "where" I_(0)=10A and o

Description : Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I=I_(0) sin omegat "where" I_(0)=10A and o

Last Answer : Two coils have a mutual inductance 0.005H. The current changes in the first coil according to the equation `I ... (pi//x)` volts. Find the value of x.

When number of turns in a coil is trippled, without any change in the length of coil, its self inductance becomes? (1) Nine times (2) Three times (3) Six times (4) One-third

Description : When number of turns in a coil is trippled, without any change in the length of coil, its self inductance becomes? (1) Nine times (2) Three times (3) Six times (4) One-third

Last Answer : (1) Nine times

Three factors responsible for the change in voltage as load is applied to an AC generator are: 1) the drop in resistance in the armature circuit, 2) the change in flux, and 3) the ____________. A. armature winding speed B. inductance load drop C. coil pitch factor D. armature reactance voltage drop

Description : Three factors responsible for the change in voltage as load is applied to an AC generator are: 1) the drop in resistance in the armature circuit, 2) the change in flux, and 3) the ____________. A. armature winding speed B. inductance load drop C. coil pitch factor D. armature reactance voltage drop

Last Answer : Answer: D

Brush sparking during commutation may be caused by ________. A. eddy currents in the armature core B. laminations in the generator field pieces C. induced current opposite to coil inductance D. coil inductance discharge occurring at commutation

Description : Brush sparking during commutation may be caused by ________. A. eddy currents in the armature core B. laminations in the generator field pieces C. induced current opposite to coil inductance D. coil inductance discharge occurring at commutation

Last Answer : Answer: D

The inductance of a coil is measured in _____________. A. ohms B. volts C. henries D. amperes

Description : The inductance of a coil is measured in _____________. A. ohms B. volts C. henries D. amperes

Last Answer : Answer: C

Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Description : Alternating current circuits develop resistance, inductance and capacitance. The inductance of a coil is expressed in _____________. A. ohms B. mhos C. henrys D. farads

Last Answer : Answer: C

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

Mention the inductance value of the peterson’s coil.

Description : Mention the inductance value of the peterson’s coil.

Last Answer : L=1/3wc2

Find the energy of a coil of inductance 18mH and current passing through it 1.25A.(in 10 -3 order) a) 14.06 b) 61 c) 46.1 d) 28.12

Description : Find the energy of a coil of inductance 18mH and current passing through it 1.25A.(in 10 -3 order) a) 14.06 b) 61 c) 46.1 d) 28.12

Last Answer : a) 14.06

The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Description : The inductance is the measure of a) Electric charges stored by the material b) Emf generated by energising the coil c) Magnetic field stored by the material d) Magnetization of dipoles

Last Answer : c) Magnetic field stored by the material

Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length. a) 131.94mH b) 94.131mH c) 131.94H d) 94.131H

Description : Find the inductance of a coil with permeability 3.5, turns 100 and length 2m. Assume the area to be thrice the length. a) 131.94mH b) 94.131mH c) 131.94H d) 94.131H

Last Answer : a) 131.94mH

If the permeability of the core of a coil increases, what happens to (a) inductance and (b) true power in the circuit?

Description : If the permeability of the core of a coil increases, what happens to (a) inductance and (b) true power in the circuit?

Last Answer : (a) Inductance increases; (b) true power decreases.

Due to self-inductance, the coil wires are known as: a. Insulator b. Conductor c. Inductor d. Semi-conductor

Description : Due to self-inductance, the coil wires are known as: a. Insulator b. Conductor c. Inductor d. Semi-conductor

Last Answer : c. Inductor

The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Description : The phenomenon of producing emf in the coil due to change of current in the coil itself is called: a. mutual induction b. self-induction c. self-inductance d. mutual inductance

Last Answer : d. mutual inductance

The mutual inductance of the coil depends upon: a. density of the coil b. stiffness of coil c. material of coil d. geometry of the coil

Description : The mutual inductance of the coil depends upon: a. density of the coil b. stiffness of coil c. material of coil d. geometry of the coil

Last Answer : d. geometry of the coil

When number of turns in a coil is trippled, without any change in the length of coil, its self inductance becomes? (1) Nine times (2) Three times (3) Six times (4) One–third

Description : When number of turns in a coil is trippled, without any change in the length of coil, its self inductance becomes? (1) Nine times (2) Three times (3) Six times (4) One–third

Last Answer : Nine times

Explain the error occurred due to pressure coil inductance of electrodynamometer type wattmeter. How this error is compensated?

Description : Explain the error occurred due to pressure coil inductance of electrodynamometer type wattmeter. How this error is compensated?

Last Answer : For power measurement assume that the pressure coil of wattmeter is purely restitive. Hence current taken by pressure coil Ipc is in phase with voltage across the pressure coil Vpc  ... inductive reactance XL the pressure coil circuit is made purely resistive and the error is eliminated.

A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities

Description : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be:

Last Answer : A 100 turn coil has an inductance of 6 mH. If the number of turns is increased to 200, all other quantities remaining the same, the inductance will be: 24 mH

The self inductance of a coil can be measured using

Description : The self inductance of a coil can be measured using (A) Wien’s Bridge (B) Schering Bridge (C) Anderson’s Bridge (D) Wheatstone Bridge

Last Answer : The self inductance of a coil can be measured using Anderson’s Bridge

The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second...

Description : The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second coil has an inductance of 105 mH. What is the mutual inductance between the coils?  (1) 3.54 mH (2) 7.88 mH (3) 39.9 mH (4) 189.3 mH

Last Answer : The coefficient of coupling between two coils is 0.45. The first coil has an inductance of 75 mH and the second coil has an inductance of 105 mH. 39.9 mH is the mutual inductance between the coils.

On doubling the number of turns of a coil the inductance

Last Answer : On doubling the number of turns of a coil the inductance Quadruples.

Which operating systems is used primarily for networks?

Description : Which operating systems is used primarily for networks?

Last Answer : Windows

EDI requires a. representation of common business documents in computer readable forms b. data entry operators by receivers c. special value added networks d. special hardware at co-operating Business premises

Description : EDI requires a. representation of common business documents in computer readable forms b. data entry operators by receivers c. special value added networks d. special hardware at co-operating Business premises

Last Answer : a. representation of common business documents in computer readable forms 

When an operating motor is connected to the controller shown in the illustration, the a path of current flow through the circuit is ____________. EL-0010 A. 'L1', stop button, start button, coil 'CR', 'L2' B. 'L1', stop button, 'CR' and 'M' contacts, 'M' coil, 'OL contacts, the 'CR' coil in parallel, 'L2' C. 'L1', stop button, jog button, 'CR' contact, 'CR' relay, 'L2' D. 'L1', stop button, start button, 'CR' contact, 'M' contact, 'CR' coil, 'L2'

Description : When an operating motor is connected to the controller shown in the illustration, the a path of current flow through the circuit is ____________. EL-0010 A. 'L1', stop button, start button, coil 'CR', 'L2' B. 'L1' ... L2' D. 'L1', stop button, start button, 'CR' contact, 'M' contact, 'CR' coil, 'L2'

Last Answer : Answer: B

As shown in the illustration, which listed action will occur first when push button 'Q' is depressed? EL-0017 A. Contacts 'H-1', 'H-2' and 'H-3' close. B. Contact 'H-4' closes. C. Operating coil 'C' energizes. D. Switch 'R' opens.

Description : As shown in the illustration, which listed action will occur first when push button 'Q' is depressed? EL-0017 A. Contacts 'H-1', 'H-2' and 'H-3' close. B. Contact 'H-4' closes. C. Operating coil 'C' energizes. D. Switch 'R' opens.

Last Answer : Answer: C

If the motor shown in the illustration will not start when 'Q' is depressed, which of the listed components should be checked FIRST? EL-0017 A. Fuses 'F-1' and 'F-2'. B. Operating coil 'C'. C. Contacts 'H-1', 'H-2', and 'H-3'. D. Contact 'H-4'.

Description : If the motor shown in the illustration will not start when 'Q' is depressed, which of the listed components should be checked FIRST? EL-0017 A. Fuses 'F-1' and 'F-2'. B. Operating coil 'C'. C. Contacts 'H-1', 'H-2', and 'H-3'. D. Contact 'H-4'.

Last Answer : Answer: A

The electrical device shown in the illustration is a/an _____________. EL-0077 A. operating coil B. indicating lamp C. motor armature D. potentiometer

Description : The electrical device shown in the illustration is a/an _____________. EL-0077 A. operating coil B. indicating lamp C. motor armature D. potentiometer

Last Answer : Answer: D

A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Description : A flickering ground detection lamp on a DC system would indicate a _____________. A. multiple-ground condition in the distribution system B. ground in an armature coil of an operating machine C. ground in a motor accompanied with a short D. short between two adjacent bars of the generator commutator

Last Answer : Answer: B

If a magnetic controller contact fails to pick up when the operating coil is energized, one possible cause may be _______________. A. low spring pressure B. low voltage to the coil C. the residual magnetism of the contact faces D. dirty contact faces

Description : If a magnetic controller contact fails to pick up when the operating coil is energized, one possible cause may be _______________. A. low spring pressure B. low voltage to the coil C. the residual magnetism of the contact faces D. dirty contact faces

Last Answer : Answer: B

Humming or buzzing of electric contacts is a symptom of ____________. A. low voltage on the operating coil B. power failure to the operating coil C. a control circuit ground D. a control circuit overload

Description : Humming or buzzing of electric contacts is a symptom of ____________. A. low voltage on the operating coil B. power failure to the operating coil C. a control circuit ground D. a control circuit overload

Last Answer : Answer: A

Magnetic controller contacts may become welded together during operating conditions as a result of _____________. A. high spring pressure B. high ambient temperature C. an open coil D. low voltage on operating coil

Description : Magnetic controller contacts may become welded together during operating conditions as a result of _____________. A. high spring pressure B. high ambient temperature C. an open coil D. low voltage on operating coil

Last Answer : Answer: D

When troubleshooting a magnetic controller, it is found that the contacts are welded together. The most probable cause is _____________. A. excessive operation at low load B. high ambient temperature C. low voltage on the operating coil D. high voltage on the operating coil

Description : When troubleshooting a magnetic controller, it is found that the contacts are welded together. The most probable cause is _____________. A. excessive operation at low load B. high ambient temperature C. low voltage on the operating coil D. high voltage on the operating coil

Last Answer : Answer: C

During its operation, loud buzzing and resultant welding of contacts of a magnetic relay may be caused by __________. A. overheating of the contactor coil B. low voltage on the operating coil C. low insulation resistance to ground D. lubrication of the contact bearing points

Description : During its operation, loud buzzing and resultant welding of contacts of a magnetic relay may be caused by __________. A. overheating of the contactor coil B. low voltage on the operating coil C. low insulation resistance to ground D. lubrication of the contact bearing points

Last Answer : Answer: B

The main difference between a motor control circuit containing low voltage protection and low voltage release is that the latter contains _____________. A. a magnetic operating coil B. normally open line contacts C. thermal-overload protection D. a momentary-contact start button

Description : The main difference between a motor control circuit containing low voltage protection and low voltage release is that the latter contains _____________. A. a magnetic operating coil B. normally open line contacts C. thermal-overload protection D. a momentary-contact start button

Last Answer : Answer: D