Description : methods consists of dropping the seeds in furrow lines in a continuous flow and covering them with soil. a. Dibbling b. Transplanting c. Drilling d. Seed dropping behind the plough
Last Answer : Drilling
Description : consists of dropping the seeds in furrow lines in a continuous flow and covering them with soil a. Broadcasting b. Drilling c. Dibbling d. Transplanting
Last Answer : Ans:- b. Drilling
Description : is a machine for placing the seeds in a continuous flow. a) Seed drill b) Transplanting c) Hill dropping d) Check row planting
Last Answer : Seed drill
Description : It consists of dropping the seeds in furrow lines in a continuous stream and covering them with soil. The spacing between the seeds is not uniform. a. Dibbing c. Broadcasting d. None of the above.
Last Answer : Ans - b. Drilling
Description : In method, seeds are dropped at fixed spacing and not in a continuous stream. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting
Last Answer : Hill dropping
Description : method used for planting in row to row and plant to plant distance is uniform. c. Transplanting d. Hill dropping e. Check row planting f. Drilling
Last Answer : Check row planting
Description : The method of planting in which row-to-row as well as plant-to-plant distance is uniform is: A. Drilling B. Hill dropping C. Check row planting D. All are correct
Description : Very common sowing methods used in villages. a. Broadcasting b. Dibbling c. Drilling d. Seed dropping behind the plough
Last Answer : Seed dropping behind the plough
Description : is the process of placing seeds in holes made in seedbed and covering them. a) Broadcasting. b) Dibbling c) Drilling. d) Transplanting
Last Answer : Dibbling
Description : Name the method which is not a sowing method a) Broadcasting b) Hill dropping c) Dibbling d) Hitching
Last Answer : <!-- [endif] -->Hitching
Description : consists of preparing seedlings in nursery and then planting these seeds in the prepared field. a) Hill dropping b) Transplanting c) Seed dropping behind the plough d) Check row planting
Last Answer : Transplanting
Description : In Hill dropping few seeds are dropped as a hill at a fixed place and not in a continuous stream. The spacing between hill to hill in a row is …………. a.Inclined b. Not uniform d. None of the above
Last Answer : Ans - c. constant
Description : is the process of random scattering of seed on the surface of sead beds. a) Broadcasting. b) Dibbling c) Drilling. d) Transplanting
Last Answer : Broadcasting.
Description : In method, row to row and plant to plant distance is uniform. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting
Description : consists of preparing seedlings in nursery and then planting these seedlings in the prepared field. a) Seed dropping behind the plough b) Transplanting c) Hill dropping d) Check row planting
Description : The equipment used for dropping seeds in a continuous stream and the spacing between plant to plant in a row is not constant is: A. Seed drill B. Planter C. Trans planter D. All are correct
Description : The difference between seed drill and planter is a) Variation in hill to hill spacing b) Number of seed per hill is more uniform in planter c) Seed delivery tube d) Furrow opener e) Both a and b Ans. e
Last Answer : ans e
Description : Functions of seed drill machine . g. To carry the seeds h. To open furrow to an uniform depth i. To cover the seeds and compact the soil around the seed j. All of the above
Last Answer : All of the above
Description : Below is not a function of seed drill a) To meter the seeds b) To carry the seeds c) To remove the seeds d) To place the seeds in furrow
Last Answer : To remove the seeds
Description : It is the process of placing seeds in holes made in the seedbed and closing the seed with soil. In this method, seeds are placed in holes made at definite depth at fixed spacing. b. Drilling c. Broadcasting d. None of the above.
Last Answer : Ans - a. Dibbing
Description : It is the method of random scattering of seeds on the surface of seedbed. a. Dibbing b. Drilling d. None of the above.
Last Answer : Ans - c. Broadcasting
Description : is very common method used in villages. a) Seed dropping behind the plough b) Transplanting c) Hill dropping
Description : Lister planting or furrow planting is practiced for (a) High rainfall areas to improve surface drainage (b) Semi-arid conditions to place seed deep in moist soil (c) Areas where natural moisture conditions are favourable (d) Irrigated areas leaving more space for operation of equipments
Last Answer : (b) Semi-arid conditions to place seed deep in moist soil
Description : The dibbling method of sowing reduces seed rate by: A. 1/2nd B. 1/3rd C. 1/5th D. 2/3rd
Last Answer : 1/3rd
Description : The dibbling is mostly used for sowing: A. Cereal grains B. Vegetables
Last Answer : Vegetables
Description : In cell formation using production flow analysis, the following process will be left out of theanalysis a.Grinding b.Milling c.Drilling d.Gear cutting
Last Answer : d.Gear cutting
Description : It is a machine used for placing the seeds in a continuous stream in furrows at uniform rate and at controlled depth with an arrangement of covering the seeds with soil. a. Seed tube b. Seed dropper d. None of the above.
Last Answer : Ans - c. Seed drill
Description : machine is used for placing the seeds in continuous furrows at uniform rate. a) Dry land weeder b) Junior home c) Seed drill d) Engine operated weeder
Description : Variation in the drop size of seed can be minimised by (a) Using a short, smooth, small diameter tube with the discharge end close to bottom of furrow. (b) Discharging the seed directly from ... (c) Mechanically transferring the seeds from the metering unit in the furrow. (d) All of the above.
Last Answer : d) All of the above.
Description : A furrow cross-section in a country plough is commonly a) Circular b) Triangular c) Rectangular d) Trapezoidal
Last Answer : ans b
Description : Dead furrow is made by 1. One way MB plough 2. 2 way MB plough 3. ridger 4. disc harrow
Last Answer : ans 1
Description : A seed drill with mechanical seed metering device mainly consists of: Frame, Seed box, Seed metering mechanism, drive transmission system, Furrow openers, Covering device, ……, hitch frame and Transport wheels. b. Differential c. U.V joints d. None of the above.
Last Answer : Ans - a. clutch
Description : The furrow opener used in black cotton soil is: A. Disc type B. Shoe type C. Reversible shovel type D. Hoe type
Last Answer : Hoe type
Description : is a device to refill a furrow after seed has been placed in it. a) Seed box b) Covering device c) Transport wheel d) Seed drill
Last Answer : Covering device
Description : Select the function of Moldboard plough. a) Lifting the soil. c) Pulverizing the soil b) Cutting the furrow slice d) All of the above
Description : Functions of mold board plough a. Cutting the furrow slice. c) body to yoke b. Increase the depth of operation. d) length of the beam
Last Answer : Cutting the furrow slice.
Description : Dead furrow is made by A. One way MB plough. B. 2 way MB plough C. Ridger. D. Disc harrow
Last Answer : One way MB plough
Description : The components of disc plough are . a) Frame extension b) Top link connection c) Furrow wheel d) All of the above
Last Answer : <!-- [endif] -->All of the above
Description : is the wheel of the plough, which runs on the plough land. a) Gauge wheel b) Land wheel c) Furrow wheel d) None
Last Answer : Land wheel
Description : turns the furrow slice used in stubble soils. a) Stubble type b) Slat type c) Share d) Jointer
Last Answer : <!-- [endif] -->Stubble type
Description : is the function of mold board plough. a) Cutting the furrow slice b) Lifting the soil c) Pulverizing the soil d) All of the above
Description : Drilling, milling and threading are examples of which kind of processes? a.Additive manufacturing b.Subtractive manufacturing c.Formative manufacturing d.None of the above
Last Answer : b.Subtractive manufacturing
Description : In a CNC program block, N05 GO1 G91 G33 X20 Z-40……, G33 refer to a.Peck Drilling b.Counter Boring c.Thread Cutting d.Grooving
Last Answer : c.Thread Cutting
Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above
Last Answer : Tractor and bullock
Description : The seed rate required in broadcasting method in comparison to drilling is: A. More B. Less C. Equal D. All are correct
Last Answer : More
Description : Paddy cono weeder is useful for. a) Weeding between rows of crops like cotton for sugarcane. b) For uprooting and burying weeds in between standing rows of rice crops in in wetland. c) For weeding in raw crops in rain fed. d) For placing seed in continuous flow.
Last Answer : For uprooting and burying weeds in between standing rows of rice crops in in wetland.
Description : Any ideas why our linden is not dropping it's keys/seeds?
Last Answer : Need Answer
Description : What is dibbling method of sowing? -SST 10th
Last Answer : In the method of dibbling, seeds are dropped at regular intervals in the furrows made by the plough.
Description : Spring has pretty much sprung, seeds and sprouts are happening! What (and when) are you planting?
Last Answer : We’re taking a break this year. The chickens, groundhogs, birds, and rabbits have won. We’re just doing an herb garden this year. Having access to fresh basil is amazing.
Description : The seeds they sell for planting... What do they do to them?
Last Answer : Also, I am aware that a lot of the fruit and vegetables they sell in stores are hybrids that are sterile.