Description : The taper provided on pattern for its easy & clean withdrawal from the mould is termed as the __________ allowance. (A) Casting (B) Pattern (C) Draft (D) Distortion
Last Answer : C) Draft
Description : Use suitable pattern allowance to compensate the shrinkage problem during casting process.
Last Answer : Shrinkage Allowance: As metal solidifies and cools, it shrinks and contracts in size. To compensate for this, a pattern is made larger than the finished casting by means of a shrinkage or ... are reduced by gates & risers Solid contraction can be reduced by providing more allowance on pattern
Description : selection of tractor depends upon…… a) Land holding c) Cropping pattern b) Repairing facilities d) All of the above
Last Answer : All of the above
Description : On gathering stiffness and loads, the system of equations is given by a.KQ=F b.KQ≠F c.K=QF d.K≠QF
Last Answer : a.KQ=F
Description : The two primary tillage equipments are 1. MB and disc harrow 2. Disc plough and disc harrow 3. Disc harrow and cultivator 4. MB and subsoiler
Last Answer : ans 4
Description : Power tillers operate most satisfactory with? 1. Rotary tillage 2. Plough 3. Transport carts 4. reapers
Last Answer : ans 1
Description : Which of the following is not a tractor drawn primary tillage tool? 1. Disc plough 2. rotavator 3. Country plough 4. Bar harrow
Last Answer : ans 3
Description : Which one of the following is not a secondary tillage tool? 1. Disc Plough 2. Disc harrow 3. Mould Board 4. none of these
Description : Which of the following is not a tractor drawn tillage tool? 1. Cultivator 2. Augar plough 3. Harrow 4. Plank
Description : It Is used for deep tillage and penetration of soil for storage for rain water in crop root zone. b. Disc plough c. Mould board plough d. None of the above
Last Answer : Ans- a. Chisel plough
Description : This type blades in rotary tiller are Suitable for deep tillage in relatively clean ground, but clogging and wrapping of trashes on the tynes and shafts. a. L c. straight d. None of the above
Last Answer : Ans- b. twisted
Description : Harrow, patella, Guntaka, Bund former, Ridger, Puddler, leveller and cultivator are the tillage implements. a. Primary c. post d. None of the above
Last Answer : Ans - b. Secondary
Description : Mould board, disc, Chisel and Sub soil plough are the tillage equipments. b. Secondary c. post d. None of the above
Last Answer : Ans - a. Primary
Description : Harrow is a tillage implement that cuts the soil to shallow depth for smoothening and pulverizing the soil as well as to cut weeds and to mix the materials with the soil. a. Primary. c. Tertiary b. Secondary. d. None
Last Answer : Secondary
Description : is a Tillage system in which only isolated bands of soil are tilled? a) Strip Tillage. c) Mulch Tillage b) Rotary Tillage. d) Combined Tillage
Last Answer : Strip Tillage.
Description : Which of the following is not the type of Tillage? a) Minimum Tillage c) Machine Tillage b) Mulch Tillage d) Strip Tillage
Last Answer : Machine Tillage
Description : It is employed on mulchers designed mainly for secondary Tillage. a. ‗L‘ type blade c) straight blade b. Twisted blade d) dics blade
Last Answer : straight blade
Description : Types of Tillage a. Minimum Tillage. c) secondary Tillage b. Primary Tillage. d) All of the above
Description : Objectives of Tillage a. To destroy the prevent weeds. c) both A & B b. To reduce soil and erosion d) increase the output of work per unit time
Last Answer : both A & B
Description : The two primary tillage equipments are A. MB and disc harrow B. Disc plough and disc harrow C. Disc harrow and cultivator. D. MB and. Subscriber
Last Answer : MB and disc harrow
Description : Power tillage operate most satisfactory with A. Rotary tillage B. Plough C. Transport carts D. Reapers
Last Answer : Rotary tillage
Description : is not a secondary tillage. A. Disc plough B. Plough C. Mould board D. None of these
Last Answer : disk plough,plough and mb plough are primary implement so answer is non of these
Description : is not a tractor drawn tillage tool A. Cultivator B. Augar plough C. Narrow D. Plank
Last Answer : Plank
Description : Harrow is secondary tillage implement used to cut soil to shallow depth for _ and A) smoothening. C) none of the above B) pulverizing. D) both
Last Answer : both
Description : Secondary tillage implements are and . A) Hammer and screwdriver. C) Tractor and bullock B) Lathe and drilling machines. D) All of the above
Last Answer : Tractor and bullock
Description : Lighter and final operations performed on the soil after tillage operations. A) Primary. C) Tertiary B) Secondary D) None
Last Answer : Primary
Description : Secondary tillage consists of conditioning the to meet the different tillage objectives of the farm A) Weather. C) Atmosphere B) Soil. D)All of the above
Last Answer : Soil
Description : tillage utilizes two or more different types of tools to simplify fields a) combined b) basic c) strip d) rotary
Last Answer : combined
Description : The following tillage is not a type of a tillage a) maximum b) minimum c) strip d) rotary
Last Answer : maximum
Description : tillage are proper for seeding and planting operations a secondary a) Primary b) Basic c) Medium d) None of these
Description : is the mechanical manipulation of soil to provide favorable condition for crop production. A. Power tiller C. Rotary tiller B. Tillage D. Disc plough
Last Answer : Tillage
Description : The concept of power tillage came in the world in the year . A. 1910 C. 1920 B. 1945 D. 1932
Last Answer : 1920
Description : is the prime mover in which the direction of travel and its control for field operation is performed by the operator walking behind it. A. Power tiller C. Tillage B. Disc plough D. Rotary tiller
Last Answer : Power tiller
Description : is not a tractor drawn tillage tool: a) Cultivator c) Augar plough b) Harrow d) Plank
Description : The power tillage is most suitable for: a) Stationary operation c) Deep ploughing b) Rotary operation d) All are correct
Last Answer : Rotary operation
Description : are the primary tillage implements. A. Chisel plough and sub soiler C. Disc plough and disc harrow B. Chisel plough and disc harrow D. Leveler and clad crusher
Last Answer : Chisel plough and sub soiler
Description : Finner operation performed for seedbed preparation is :- A. Primary tillage C. Strip tillage B. Secondary tillage D. Rotary tillage
Last Answer : Primary tillage
Description : Power tillers operate most satisfactory with? A. Rotary tillage C. Plough B. Transport carts D. Reapers
Description : is the following is not a secondary tillage tool A. Disc plough C. Mould board B. Disc harrow D. None of the above
Last Answer : disk harrow is secondry implement and mb plough and disk plouhg will be primarry implement
Description : In lighter texture soils such as , tillage can be undertaken at moisture levels below field capacity. A. Loam. C) Loam or sand B. Sand. D) Non of the above
Last Answer : Loam or sand
Description : In clay soils, the fields often have to be fully saturated tillage can be undertaken. A. Before. C) After B. Beginning. D) Middle
Last Answer : Before
Description : Primary tillage is the soil tillage after the last harvest. A. First. C) Second B. Third. D) Fourth
Last Answer : First
Description : purpose of the tillage is to restrict water movement from the surface layers. A. Primary. C) Secondary B. Primary or secondary. D) Tertiary
Description : Tillage is normally classified as tillage. A. Primary. C) Primary or secondary B. Secondary. D) Tertiary
Last Answer : Primary or secondary
Description : Which one of the following is not a rapid indirect tooling method? a.Vacuum Casting b.Investment Casting c.Laser-Engineered Net Shaping d.Injection molding
Last Answer : c.Laser-Engineered Net Shaping
Description : In finish machining of an island on a casting with CNC milling machine, an end mill with 10 mm diameter is employed. The corner points of the island are represented by (0, 0), (0, 30), (50, 30) and (50, 0). By applying cutter radius right ... , 5), (5, 5) d.(5, 5), (45, 5), (45, 25), (5, 25), (5, 5)
Last Answer : a.(-5, 0), (-5, 35), (55, 35), (55,-5), (-5,-5)
Description : Curved twisted blades are specially suited for m. Minimum tillage of trashy land at shallow depths n. Dried hard soils o. Cutting and pulverisation in wet sticky clay soil p. For operating on the sides of plant bed
Last Answer : p. For operating on the sides of plant bed
Description : shaped blades are best suited for i. Minimum tillage of trashy land at shallow depths j. Dried hard soils k. Cutting and pulverisation in wet sticky clay soil l. Working under normal field conditions
Last Answer : i. Minimum tillage of trashy land at shallow depths
Description : Hook type blades best suited for e. Minimum tillage of trashy land at shallow depths f. Dried hard soils g. Cutting and pulverisation especially in wet sticky clay soil h. Working under normal field conditions
Last Answer : f. Dried hard soils
Description : A power tiller is relatively more suitable for : A. Puddling of low land paddy fields with a rotary tiller B. Primary tillage of upland paddy fields with a rotary tillers C. Primary tillage with a mould board plough D. Farm transportation work
Last Answer : A. Puddling of low land paddy fields with a rotary tiller