Safe bearing capacity of black cotton soil varies from (A) 2 to 3 t/m2 (B) 5 to 7.5 t/m2 (C) 8 to 10 t/m2 (D) 10 to

Safe bearing capacity of black cotton soil varies from
(A) 2 to 3 t/m2
(B) 5 to 7.5 t/m2
(C) 8 to 10 t/m2
(D) 10 to 12 t/m2
by

1 Answer

Answer :

Answer: Option B
by

Related questions

If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Description : Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Last Answer : Answer: Option D

In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Description : In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Last Answer : Answer: Option D

The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Description : The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Last Answer : Answer: Option D

The maximum net pressure intensity causing shear failure of soil, is known (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Description : The maximum net pressure intensity causing shear failure of soil, is known (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Last Answer : (C) Net ultimate bearing capacity

The maximum pressure which a soil can carry without shear failure, is called (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Description : The maximum pressure which a soil can carry without shear failure, is called (A) Safe bearing capacity (B) Net safe bearing capacity (C) Net ultimate bearing capacity (D) Ultimate bearing capacity

Last Answer : (A) Safe bearing capacity

The ultimate bearing capacity of a soil, is (A) Total load on the bearing area (B) Safe load on the bearing area (C) Load at which soil fails (D) Load at which soil consolidates

Description : The ultimate bearing capacity of a soil, is (A) Total load on the bearing area (B) Safe load on the bearing area (C) Load at which soil fails (D) Load at which soil consolidates

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Description : The intensity of active earth pressure at a depth of 10 metres in dry cohesionless sand with an angle of internal friction of 30° and with a weight of 1.8 t/m3 , is (A) 4 t/m2 (B) 5 t/m2 (C) 6 t/m2 (D) 7 t/m2

Last Answer : Answer: Option C

For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Description : For a clay slope of height of 10 m, the stability number is 0.05, = 2.0 t/m3 , C = 2.5 t/m2 , the critical height of the slope of the soil, is (A) 4.0 m (B) 12.5 m (C) 25.0 m (D) 15.0 m

Last Answer : (C) 25.0 m

For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Description : For determining the ultimate bearing capacity of soil, the recommended size of a square bearing plate to be used in load plate test should be 30 to 75 cm square with a minimum thickness of (A) 5 mm (B) 10 mm (C) 15 mm (D) 25 mm

Last Answer : Answer: Option D

The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Description : The maximum pressure which the soil can carry safely without the risk of shear failure is called a) Safe bearing capacity b) Ultimate bearing capacity* c) Allowable bearing capacity d) Shear bearing capacity

Last Answer : b) Ultimate bearing capacity*

Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Description : Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, (A) Q = Wh/6 (S + 2.5) (B) Q = Wh/2.5 (S + 6) (C) Q = (W × 6)/h (S + 2.5) (D) Q = (W × 2.5)/6 (S + h)

Last Answer : Answer: Option A

If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Description : If the bearing capacity of soil is 10 tonnes/cm2 and the projection of plain concrete footing from walls, is a cm, the depth D of footing is (A) D = 0.0775 a (B) D = 0.775 a (C) D = 0.775 a (D) D = 0.775 a2

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity of a pile is obtained by dividing the ultimate bearing capacity with a suitable factor of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Description : Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity ... of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Last Answer : Answer: Option D

Consider the following statements: 1. Buried service lines should be avoided in an expansive soil region. 2. A swelling pressure less than 20 kN/m2 is not of much consequence. 3. If soil is not black in colour, it is unlikely to be an expansive soil. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Buried service lines should be avoided in an expansive soil region. 2. A swelling pressure less than 20 kN/m2 is not of much consequence. 3. If soil is not black in colour, it is unlikely to be an ... (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (b) 1 & 2 only

Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Description : Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Last Answer : (D) All the above

Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Description : Allowable bearing pressure for a foundation depends upon (A) Allowable settlement only (B) Ultimate bearing capacity of soil only (C) Both allowable settlement and ultimate bearing capacity (D) None of above

Last Answer : (C) Both allowable settlement and ultimate bearing capacity

In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Description : In the plate loading test for determining the bearing capacity of soil, the size of square bearing plate should be (A) Less than 300 mm (B) Between 300 mm and 750 mm (C) Between 750 mm and 1 m (D) Greater than 1 m

Last Answer : (B) Between 300 mm and 750 mm

Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a soil depends upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Description : Select the incorrect statement. (A) Bearing capacity of a soil depends upon the amount and direction of load (B) Bearing capacity of a soil depends on the type of soil (C) Bearing capacity of a ... upon shape and size of footing (D) Bearing capacity of a soil is independent of rate of loading

Last Answer : Answer: Option A

The rise of water table below the foundation influences the bearing capacity of soil mainly by reducing (A) Cohesion and effective angle of shearing resistance (B) Cohesion and effective unit weight of soil (C) Effective unit weight of soil and effective angle of shearing resistance (D) Effective angle of shearing resistance

Description : The rise of water table below the foundation influences the bearing capacity of soil mainly by reducing (A) Cohesion and effective angle of shearing resistance (B) Cohesion and effective ... weight of soil and effective angle of shearing resistance (D) Effective angle of shearing resistance

Last Answer : Answer: Option B

When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Description : When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Last Answer : Answer: Option C

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Bearing capacity of soils cannot be improved by (A) Draining sub-soil water (B) Ramming crushed stone in soil (C) Driving sand piles (D) Watering surface of soil

Description : Bearing capacity of soils cannot be improved by (A) Draining sub-soil water (B) Ramming crushed stone in soil (C) Driving sand piles (D) Watering surface of soil

Last Answer : Answer: Option D

The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Description : The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Last Answer : Answer: Option B

The bearing capacity of a water logged soil, may be improved by (A) Grouting (B) Chemical action (C) Drainage (D) Compaction

Description : The bearing capacity of a water logged soil, may be improved by (A) Grouting (B) Chemical action (C) Drainage (D) Compaction

Last Answer : Answer: Option C

Raft foundations are used for: (A) Providing increased area of foundation over poor bearing capacity of soil (B) Spanning over small soft or loose pockets (C) Counter acting the hydrostatic effect (D) All the above

Description : Raft foundations are used for: (A) Providing increased area of foundation over poor bearing capacity of soil (B) Spanning over small soft or loose pockets (C) Counter acting the hydrostatic effect (D) All the above

Last Answer : Answer: Option D

Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Last Answer : Answer: Option D

For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

The bearing capacity of a water logged soil can be improved by (A) Compacting the soil (B) Draining the soil (C) Increasing the depth of foundation (D) Grouting

Description : The bearing capacity of a water logged soil can be improved by (A) Compacting the soil (B) Draining the soil (C) Increasing the depth of foundation (D) Grouting

Last Answer : Option B

If water table is encountered in the standard pit while conducting plate load test (a) The load test should be abandoned (b) The pit is considered unsafe (c) Test should be conducted with complete dewatering continuously throughout the test duration (d) The bearing capacity of soil cannot be determined in this condition

Description : If water table is encountered in the standard pit while conducting plate load test (a) The load test should be abandoned (b) The pit is considered unsafe (c) Test should be conducted ... continuously throughout the test duration (d) The bearing capacity of soil cannot be determined in this condition

Last Answer : (c) Test should be conducted with complete dewatering continuously throughout the test duration

Specific capacity or yield of wells, is generally expressed, as (A) m 3 per sec (B) m 3 /hour (C) m 3 /hour/m2 (D) m 3 /hour/m2 /m

Description : Specific capacity or yield of wells, is generally expressed, as  (A) m 3  per sec  (B) m 3 /hour  (C) m 3 /hour/m2 (D) m 3 /hour/m2 /m 

Last Answer : (D) m 3 /hour/m2 /m 

The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with a uniformly distributed load l t per horizontal length is (where Ic is the M.I. at the crown, which varies as the slope of the arch). (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Description : The horizontal deflection of a parabolic curved beam of span 10 m and rise 3 m when loaded with  a uniformly distributed load l t per horizontal length is (where Ic  is the M.I. at the crown, which  varies as the slope ... arch).  (A) 50/EIc (B) 100/EIc (C) 150/EIc (D) 200/E

Last Answer : (D) 200/E

The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Description : The bearing capacity of granite is generally (A) 5 to 10 kg/cm2 (B) 15 to 20 kg/cm2 (C) 30 to 35 kg/cm2 (D) 40 to 45 kg/cm2

Last Answer : Answer: Option C

Define ultimate bearing capacity and safe bearing capacity.

Description : Define ultimate bearing capacity and safe bearing capacity.

Last Answer : Ultimate bearing capacity (qu): It is the gross pressure at the base of the foundation at which the soil fails in shear is called as ultimate bearing capacity. Safe bearing capacity (qs) : It ... capacity is also referred to as the ultimate bearing capacity qu divided by factor of safety F.

Define safe bearing capacity and allowable bearing pressure.

Description : Define safe bearing capacity and allowable bearing pressure. 

Last Answer : Safe bearing capacity (qs): It is the maximum pressure which the soil can carry without risk of shear failure is called as safe bearing capacity.  OR Sometimes the safe bearing capacity is ... in shear nor there is excessive settlement of structure, is called as Allowable bearing pressure.

Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Description : Pick up the correct statement from the following: (A) The average crushing strength of hand moulded bricks is 6000 t/m2 (B) The average tensile strength of hand moulded brick is 200 t/m2 (C) The average shearing strength of hand moulded brick is 600 t/m2 (D) All the above

Last Answer : Answer: Option D

Pick up the cohesive soil from the following: (A) Red earth (B) Clay (C) Black cotton soil (D) Compacted ground

Description : Pick up the cohesive soil from the following: (A) Red earth (B) Clay (C) Black cotton soil (D) Compacted ground

Last Answer : Answer: Option C

The black cotton soil (A) Undergoes volumetric changes (B) Swells excessively when wet (C) Shrinks excessively when dry (D) All the above

Description : The black cotton soil (A) Undergoes volumetric changes (B) Swells excessively when wet (C) Shrinks excessively when dry (D) All the above

Last Answer : Answer: Option D

Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of a perfectly black body is unity (D) Value of Stefan-Boltzmann constant is 4.876 × 10 -8 KCal/m2 .hr.°K4

Description : Pick out the wrong statement: (A) With change in temperature, the radiant energy emitted by a black body remains unchanged (B) Absorptivity of a body approaches unity in case of diffuse reflection (C) Absorptivity of ... unity (D) Value of Stefan-Boltzmann constant is 4.876 10 -8 KCal/m2 .hr.°K4

Last Answer : (A) With change in temperature, the radiant energy emitted by a black body remains unchanged

To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Description : To provide inverted filter to improve the bearing capacity of soil the liquid limit of blanketing material should not be greater than a) 5 b) 20 c) 27 d) 35

Last Answer : d) 35

The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001

Last Answer : (A) 0.01

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

Explain plate load test with neat sketch to determine bearing capacity of soil.

Description : Explain plate load test with neat sketch to determine bearing capacity of soil.

Last Answer : Procedure of plate load test: 1. Excavate a pit of depth equal to 5 times to that of breath of proposed footing. 2. Keep the suitable bearing plate of specified size (30, 45, 60, 75cm square in plan) ... as shown in figure below to find out load before failure as bearing capacity of soil.

Explain the effect of water table on bearing capacity of soil.

Description : Explain the effect of water table on bearing capacity of soil.

Last Answer : Effect of water table on bearing capacity of soil: i. The rise in water table from below the foundation results in decrease in granular soil. ii. When the water table reaches the ... for bearing capacity calculations. ix. As ground water table rises accordingly bearing capacity of soil decreases.

State any four assumptions made in Terzaghi’s analysis if bearing capacity of soil.

Description : State any four assumptions made in Terzaghi’s analysis if bearing capacity of soil.

Last Answer : Assumptions of Terzaghi's bearing capacity failure theory: 1. Soil behaves like ideally plastic material. 2. Soil is homogeneous, isotropic and its shear strength is represented by Coloumb's equation. 3 ... surcharge γDf. 6. The elastic zones developed has straight boundaries inclined at ψ = ϕ.

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

The rated life of a bearing varies (a) directly as load (b) inversely as the square of the load (c) inversely as the cube of the load

Description : The rated life of a bearing varies (a) directly as load (b) inversely as the square of the load (c) inversely as the cube of the load

Last Answer : (c) inversely as the cube of the load

The rated life of a bearing varies A. Directly as load B. Inversely as square of load C. Inversely as cube of load D. Inversely as fourth power of load

Description : The rated life of a bearing varies A. Directly as load B. Inversely as square of load C. Inversely as cube of load D. Inversely as fourth power of load

Last Answer : C. Inversely as cube of load