Black cotton soil is unsuitable for foundations because its (A) Bearing capacity is low (B) Permeability is uncertain (C) Particles are cohesive (D) Property to undergo a volumetric change due to variation of moisture content

Black cotton soil is unsuitable for foundations because its
(A) Bearing capacity is low
(B) Permeability is uncertain
(C) Particles are cohesive
(D) Property to undergo a volumetric change due to variation of moisture content
by

1 Answer

Answer :

Answer: Option D
by

Related questions

In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Description : In case of foundations on black cotton soils, the most suitable method to increase the bearing capacity of soils is to (A) Increase the depth of foundation (B) Drain the soil (C) Compact the soil (D) Replace the poor soil

Last Answer : Answer: Option D

The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Description : The bearing capacity of a soil depends upon (A) Size of the particles (B) Shape of the particles (C) Cohesive properties of particles (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow trenches (C) Shallow foundations can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Description : Pick up the incorrect statement from the following: (A) The function of foundation is to distribute the load of super structure over a large bearing area (B) No timbering is required for shallow ... can be constructed on made-up soil (D) Black cotton soil is very good for foundation bed

Last Answer : Answer: Option D

The change of moisture content of soils, changes the (A) Value of the angle of repose (B) Amount of compaction required (C) Cohesive strength of soil (D) All the above

Description : The change of moisture content of soils, changes the (A) Value of the angle of repose (B) Amount of compaction required (C) Cohesive strength of soil (D) All the above

Last Answer : Answer: Option D

The property of a soil which permits water to percolate through it, is called (A) Moisture content (B) Permeability (C) Capillarity (D) None of these

Description : The property of a soil which permits water to percolate through it, is called (A) Moisture content (B) Permeability (C) Capillarity (D) None of these

Last Answer : (B) Permeability

The property of a soil due to which water percolates through it is known as a) Porosity b) Permeability* c) Moisture content d) Capillarit

Description : The property of a soil due to which water percolates through it is known as a) Porosity b) Permeability* c) Moisture content d) Capillarit

Last Answer : b) Permeability*

Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Description : Which one of the following statements is true? (A) Clays are more porous than sands (B) Pressure of organic matter in a soil decreases the bearing capacity of the soil (C) Aluminous cement is used for foundations in soils with chemical deposits (D) All the above

Last Answer : (D) All the above

Raft foundations are used for: (A) Providing increased area of foundation over poor bearing capacity of soil (B) Spanning over small soft or loose pockets (C) Counter acting the hydrostatic effect (D) All the above

Description : Raft foundations are used for: (A) Providing increased area of foundation over poor bearing capacity of soil (B) Spanning over small soft or loose pockets (C) Counter acting the hydrostatic effect (D) All the above

Last Answer : Answer: Option D

Pick up the cohesive soil from the following: (A) Red earth (B) Clay (C) Black cotton soil (D) Compacted ground

Description : Pick up the cohesive soil from the following: (A) Red earth (B) Clay (C) Black cotton soil (D) Compacted ground

Last Answer : Answer: Option C

The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Description : The maximum bearing capacity of soil is that of (A) Black cotton soil (B) Loose fine sandy soil (C) Dry coarse sandy soil (D) Hard rocks

Last Answer : Answer: Option D

Safe bearing capacity of black cotton soil varies from (A) 2 to 3 t/m2 (B) 5 to 7.5 t/m2 (C) 8 to 10 t/m2 (D) 10 to

Description : Safe bearing capacity of black cotton soil varies from (A) 2 to 3 t/m2 (B) 5 to 7.5 t/m2 (C) 8 to 10 t/m2 (D) 10 to 12 t/m2

Last Answer : Answer: Option B

The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Description : The side slope of formation in embankment /cutting depends on a) Shearing strength of soil and its angle of repose* b) Angle of repose c) Bearing capacity of the soil d) Optimum moisture content of the soil

Last Answer : a) Shearing strength of soil and its angle of repose*

Capacity of soil to absorb moisture, is generally known as (A) Permeability (B) Porosity (C) Infiltration capacity (D) Perviousness

Description : Capacity of soil to absorb moisture, is generally known as (A) Permeability (B) Porosity (C) Infiltration capacity (D) Perviousness

Last Answer : (C) Infiltration capacity

Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Description : Which of the following isn’t the property of a taper roller bearing? (a) High rigidity (b) Easy dismantling (c) Take low radial and heavy loads (d) It is unsuitable for high speed applications

Last Answer : (c) Take low radial and heavy loads

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

The black cotton soil (A) Undergoes volumetric changes (B) Swells excessively when wet (C) Shrinks excessively when dry (D) All the above

Description : The black cotton soil (A) Undergoes volumetric changes (B) Swells excessively when wet (C) Shrinks excessively when dry (D) All the above

Last Answer : Answer: Option D

__________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Description : __________ is the property of a soil to undergo large deformations when stressed, without cracking or crumbling due to the lubricating effect of the water films between adjacent particles. a. Bending b. Malleability c. Ductility d. Plasticity

Last Answer : d. Plasticity

A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Description : A 300 mm square bearing plate settles by 15 mm in a plate load test on a cohesive soil when the intensity of loading is 0.2 N/mm². The settlement of a prototype shallow footing 1 m square under the same intensity of loading is (A) 15 mm (B) 30 mm (C) 50 mm (D) 167 mm

Last Answer : (C) 50 mm

A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these

Last Answer : (B) 55.6 %

A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these

Last Answer : Answer: Option C

260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air bubbles was 1415 g and the weight of pycnometer filled with water alone was 1275 g. The moisture content in the soil is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these

Last Answer : Answer: Option B

On wetting, cohesive soils, (A) Loose permeability (B) Gain shear strength (C) Loose elasticity (D) Decrease their shear strength

Description : On wetting, cohesive soils, (A) Loose permeability (B) Gain shear strength (C) Loose elasticity (D) Decrease their shear strength

Last Answer : Option D

Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) A wet side compacted soil is more compressible than a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Description : Pick up the incorrect statement from the following: (A) Compaction has no effect on the structure of a soil (B) Permeability decreases with increase in the dry density of a compacted soil (C) ... a dry side compacted soil (D) Dry side compaction soils swell more when given access to moisture

Last Answer : (A) Compaction has no effect on the structure of a soil

The design of a retaining wall assumes that the retained earth (A) Is dry (B) Is free from moisture (C) Is not cohesive (D) All the above

Description : The design of a retaining wall assumes that the retained earth (A) Is dry (B) Is free from moisture (C) Is not cohesive (D) All the above

Last Answer : Answer: Option D

The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Description : The property of a soil which allows it to be deformed rapidly without rupture, elastic rebound and also a volume change, is known (A) Porosity (B) Plasticity (C) Permeability (D) Ductility

Last Answer : Answer: Option B

The infiltration capacity during rain storm, is considerably reduced due to (A) Surface detention (B) Soil moisture (C) Compaction due to rain (D) All the above

Description : The infiltration capacity during rain storm, is considerably reduced due to (A) Surface detention (B) Soil moisture (C) Compaction due to rain (D) All the above

Last Answer : Answer: Option D

Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Description : Grillage foundation (A) Is used to transfer heavy structural loads from steel columns to a soil having low bearing capacity (B) Is light and economical (C) Does not require deep cutting as the required base area with required pressure intensity is obtained at a shallow depth (D) All the above

Last Answer : Answer: Option D

For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Description : For a wall carrying heavy load on low bearing capacity soil, (A) Lean concrete bed is provided (B) Thick concrete bed is provided (C) Reinforced concrete bed is provided (D) Both (a) and (c) of the above

Last Answer : Answer: Option D

The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The minimum water content at which the soil retains its liquid state and also possesses a small shearing strength against flowing, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (A) Liquid limit

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The maximum water content at which a reduction in water content does not cause a decrease in volume of a soil mass, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (C) Shrinkage limit

The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Description : The minimum water content at which the soil just begins to crumble when rolled into threads 3 mm in diameter, is known (A) Liquid limit (B) Plastic limit (C) Shrinkage limit (D) Permeability limit

Last Answer : (B) Plastic limit

Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Description : Critical shear stress of cohesive sediment (a) Decreases with the void ratio for a given plasticity index (b) Increases with the plasticity index for a given void ratio (c) Increases with shear strength for a given clay content (d) All of the above.

Last Answer : (c) Increases with shear strength for a given clay content

Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity index of the soil (C) Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Last Answer : Answer: Option D

The main factor which affects the infiltration capacity, is (A) Thickness of saturated layer (B) Depth of surface detention (C) Soil moisture (D) All the above

Description : The main factor which affects the infiltration capacity, is (A) Thickness of saturated layer (B) Depth of surface detention (C) Soil moisture (D) All the above

Last Answer : Answer: Option D

Of the following statements about the major soil types, the incorrect one is : (a) alluvial soils are easy to plough (b) red soils are rich in phosphorus, nitrogen and lime content (c) laterite is typically a soil of tropical regions which receive heavy seasonal rainfall (d) black soil is highly retentive of moisture and very productive

Description : Of the following statements about the major soil types, the incorrect one is : (a) alluvial soils are easy to plough (b) red soils are rich in phosphorus, nitrogen and lime content ( ... regions which receive heavy seasonal rainfall (d) black soil is highly retentive of moisture and very productive

Last Answer : Ans: (b)

The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Description : The maximum permissible differential settlement, in case of foundations in clayey soil, is usually limited to (A) 10 mm (B) 20 mm (C) 30 mm (D) 40 mm

Last Answer : Answer: Option D

In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 m

Description : In case of foundations on sandy soil, maximum permissible differential settlement, is usually limited to (A) 15 mm (B) 25 mm (C) 35 mm (D) 45 mm

Last Answer : Answer: Option B

If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Description : If the cohesive force (c), is 1.5 t/m2 , the density ) of the soil is 2.0 t/m3 , factor of safety (F) is 1.5 and stability factor (Sn) is 0.05, the safe height of a slope, is (A) 5 metres (B) 8 metres (C) 10 metres (D) 12 metres

Last Answer : (C) 10 metres

In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Description : In non-cohesive soil in passive state of plastic equilibrium (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to the horizontal

Last Answer : (B) Minor principal stress is vertical

If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Description : If a cohesive soil specimen is subjected to a vertical compressive load, the inclination of the cracks to the horizontal is (A) 90° (B) 45° (C) 22.5° (D) 0

Last Answer : (B) 45°

Contact pressure beneath a rigid footing resting on cohesive soil is (A) Less at edges compared to middle (B) More at edges compared to middle (C) Uniform throughout (D) None of the above

Description : Contact pressure beneath a rigid footing resting on cohesive soil is (A) Less at edges compared to middle (B) More at edges compared to middle (C) Uniform throughout (D) None of the above

Last Answer : Answer: Option B

In a purely cohesive soil, the critical centre lies at the intersection of (A) Perpendicular bisector of slope and the locus of the centre (B) Perpendicular drawn at 1/3rd slope from toe and the locus of the centre (C) Perpendicular drawn at 2/3rd slope from toe and the locus of the centre (D) Directional angles

Description : In a purely cohesive soil, the critical centre lies at the intersection of (A) Perpendicular bisector of slope and the locus of the centre (B) Perpendicular drawn at 1/3rd slope from toe and the ... C) Perpendicular drawn at 2/3rd slope from toe and the locus of the centre (D) Directional angles

Last Answer : Answer: Option D

In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Description : In active state of plastic equilibrium in a non cohesive soil with horizontal ground surface (A) Major principal stress is horizontal (B) Minor principal stress is vertical (C) Major principal stress is vertical (D) Minor and major principal stresses are equally inclined to horizontal

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m) (B) Longitudinal strain in the walls of a cylinder due to liquid is (pd/2tE) (1/2 - 1/m) (C) Volumetric change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m) (D) All the above

Description : Pick up the correct statement from the following:  (A) Hoop strain of the walls of a cylinder due to liquid is (pd/2tE) (1 - 1/2m)  (B) Longitudinal strain in the walls of a cylinder due to liquid is ... change in the cylinder due to liquid is (pd/2tE) (5/2 - 2/m)  (D) All the above 

Last Answer : (D) All the above 

Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Description : For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %

Last Answer : (C) 20 %

W is the weight of soil having a moisture content w. If V is the volume of proctor's mould, the dry density of the soil is (A) WV/(1 + w) (B) V/w (1 + w) (C) W/V(1 + w) (D) V (1 + w)/W

Description : W is the weight of soil having a moisture content w. If V is the volume of proctor's mould, the dry density of the soil is (A) WV/(1 + w) (B) V/w (1 + w) (C) W/V(1 + w) (D) V (1 + w)/W

Last Answer : (C) W/V(1 + w)

Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry density relation for soil containing a constant percentage of air voids, is known as air void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above

Last Answer : (D) All the above

The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above

Description : The maximum dry density upto which any soil can be compacted depends upon (A) Moisture content only (B) Amount of compaction energy only (C) Both moisture content and amount of compaction energy (D) None of the above

Last Answer : (C) Both moisture content and amount of compaction energy