Which one of the following piles has a cast iron shoe even after removal of the hollow cylindrical steel casing? (A) Simplex pile (B) Pedestal pile (C) Vibro pile (D) Both (a) and (c) of the above

Which one of the following piles has a cast iron shoe even after removal of the hollow cylindrical
steel casing?
(A) Simplex pile
(B) Pedestal pile
(C) Vibro pile
(D) Both (a) and (c) of the above
by

1 Answer

Answer :

Answer: Option D
by

Related questions

In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used (A) Vibro pile (B) Pressure pile (C) Franki pile (D) Pedestal pile

Description : In places where the soil is soft and has small resistance to the flow of concrete, which one of the following types of piles, is used (A) Vibro pile (B) Pressure pile (C) Franki pile (D) Pedestal pile

Last Answer : Answer: Option A

Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Description : Best type of piles for soft soil having little resistance to the flow of concrete, is (A) Simplex pile (B) Vibro pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

The compaction of concrete in the drilled pile hole is done by compressed air in the case of (A) Simplex pile (B) Franki pile (C) Pressure pile (D) Vibro pile

Description : The compaction of concrete in the drilled pile hole is done by compressed air in the case of (A) Simplex pile (B) Franki pile (C) Pressure pile (D) Vibro pile

Last Answer : Answer: Option C

Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Description : Negative skin friction on piles (A) Is caused due to relative settlement of the soil (B) Is caused in soft clays (C) Decreases the pile capacity (D) All of the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Description : Pick up the incorrect statement from the following: (A) Space between the exterior walls of a warehouse and bag piles should be 30 cm (B) Cement bags should preferably be piled on wooden planks (C) Width and height of the pile should not exceed 3 m and 2.70 m respectively (D) None of these

Last Answer : Answer: Option D

The bearing capacity of piles is determined by (A) Dynamic formula (B) Static formula (C) Pile load tests (D) All the above

Description : The bearing capacity of piles is determined by (A) Dynamic formula (B) Static formula (C) Pile load tests (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity of a pile is obtained by dividing the ultimate bearing capacity with a suitable factor of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Description : Pick up the correct statement from the following: (A) The bearing capacity of a pile is defined as the load which can be sustained by the pile without producing excessive settlement (B) The safe bearing capacity ... of safety (C) The factor of safety for piles is taken as 6 (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Description : Pick up the correct statement from the following: (A) The sand in the sand pile is well compacted (B) The sand is kept moist at the time of placing and tamping (C) Sand piles are generally used under column loads (D) All of the above

Last Answer : Answer: Option D

In case of Raymond pile (A) Lengths vary from 6 m to 12 m (B) Diameter of top of piles varies from 40 cm to 60 cm (C) Diameter of pile at bottom varies from 20 cm to 28 cm (D) All the above

Description : In case of Raymond pile (A) Lengths vary from 6 m to 12 m (B) Diameter of top of piles varies from 40 cm to 60 cm (C) Diameter of pile at bottom varies from 20 cm to 28 cm (D) All the above

Last Answer : Answer: Option D

Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. Friction piles are also called floating piles 2. Minimum number of piles to qualify as a pile group is three. 3. The group efficiency of a pile group may be either less than 100% or more than 100%. ... ) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

The pile which is provided with a bulb filled with concrete at its lower end, is known as (A) Simplex pile (B) Mac-Arthur pile (C) Raymond pile (D) Franki pile

Description : The pile which is provided with a bulb filled with concrete at its lower end, is known as (A) Simplex pile (B) Mac-Arthur pile (C) Raymond pile (D) Franki pile

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which transfers its load to the surrounding soil (C) A pile is a slender member which transfers its load by friction (D) A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Description : Pick up the correct statement from the following: (A) A pile is a slender member which transfers the load through its lower end on a strong strata (B) A pile is a slender member which ... A pile is a cylindrical body of concrete which transfers the load at a depth greater than its width

Last Answer : Answer: Option B

Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Description : Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Last Answer : Option D

Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Description : Cast iron piles (A) Are suitable for works under sea water (B) Resist shocks or vibrations (C) Are suitable for use as batter piles (D) Are useful for heavy vertical loads

Last Answer : Answer: Option D

Place three piles of matches on a table, one with 11 matches, the second with 7, and the third with 6. You are to move matches so that each pile holds 8 matches. You may add to any pile only as many matches as it already contains. All the matches must come from one other pile. For example, if a pile holds 6 matches, you may add 6 to it, no more or less. You have three moves. -Riddles

Description : Place three piles of matches on a table, one with 11 matches, the second with 7, and the third with 6. You are to move matches so that each pile holds 8 matches. You may add to any pile only as many ... a pile holds 6 matches, you may add 6 to it, no more or less. You have three moves. -Riddles

Last Answer : First pile to second; second to third; third to first:Pile Initial number First move Second move Third move First1111-7=444+4=8Second77+7=1414-6=88Third666+6=1212-4=8

Pick up the correct statement from the following: (A) The pile driven in sand is called sand pile (B) The drilled hole filled with sand is called sand pile (C) The sand piles are used for bearing purposes (D) None of these

Description : Pick up the correct statement from the following: (A) The pile driven in sand is called sand pile (B) The drilled hole filled with sand is called sand pile (C) The sand piles are used for bearing purposes (D) None of these

Last Answer : Option A

A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Description : A pre-cast pile generally used, is (A) Circular (B) Square (C) Octagonal (D) Square with corners chamfered

Last Answer : Answer: Option D

A short, hollow cast iron cylinder with a wall thickness of 1 cm is to carry a compressive load of 10 tonnes. If the working stress in compression is 800 kg/cm2, the outside diameter of the cylinder should not be less than a) 0.5cm b) 5 cm c) 2.5cm d) 4.5 cm

Description : A short, hollow cast iron cylinder with a wall thickness of 1 cm is to carry a compressive load of 10 tonnes. If the working stress in compression is 800 kg/cm2, the outside diameter of the cylinder should not be less than a) 0.5cm b) 5 cm c) 2.5cm d) 4.5 cm

Last Answer : b) 5 cm

A cylindrical rod of iron whose height is eight times its radius is melted and cast into spherical balls each of half the radius of the cylinder. -Maths 9th

Description : A cylindrical rod of iron whose height is eight times its radius is melted and cast into spherical balls each of half the radius of the cylinder. -Maths 9th

Last Answer : Let radius of iron rod = r ∴∴ Height = 8r ∴∴ Volume of iron rod =π×(r)2×8r⇒8πr3=π×(r)2×8r⇒8πr3 ⇒⇒ Radius of spherical ball =r2=r2 Volume of spherical ball =43π(r2)3=43π(r2)3 Let n balls are casted ∴n×43π(r38)=8πr3∴n×43π(r38)=8πr3 ⇒n6=8⇒n=48

A cylindrical rod of iron whose radius is one-fourth of its height is melted and cast into spherical balls of the same radius as that of the cylinder. -Maths 9th

Description : A cylindrical rod of iron whose radius is one-fourth of its height is melted and cast into spherical balls of the same radius as that of the cylinder. -Maths 9th

Last Answer : Let radius of cylindrical rod =r ⇒ height =4r Volume of cylindrical rod =πr2h =πr2(4r) =4πr3 Volume of spherical balls of radius r=34​πr3 No. of balls =34​πr34πr3​=

Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Description : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2.0mm respectively. The resistivity of the ma

Last Answer : Find the resistance of a hollow cylindrical conductor of length 1.0m and inner and outer radii 1.0mm and 2 ... the material is `2.0xx10^(-8)(Omega)m`.

Which of the following vibro-meters have frequency ratio (ω/ω n ) << 1? A. Accelerometers B. Velometers C. Both A. and B. D. None of the above

Description : Which of the following vibro-meters have frequency ratio (ω/ω n )

Last Answer : A. Accelerometers

Manholes are less common in (A) Cast iron pipes (B) Steel pipes (C) Hume steel pipes (D) R.C.C. pipes

Description : Manholes are less common in  (A) Cast iron pipes  (B) Steel pipes  (C) Hume steel pipes  (D) R.C.C. pipes

Last Answer : (A) Cast iron pipes 

A ferrous metal is (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Description : A ferrous metal is (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Last Answer : Answer: Option D

Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Description : Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Last Answer : Answer: Option D

Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Description : Depending on the chemical composition and mechanical properties, iron may be classified as (A) Cast iron (B) Wrought iron (C) Steel (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Rust is due to formation of oxides (B) Cast iron oxidises less (C) Steel oxidises most (D) All the above

Description : Pick up the correct statement from the following: (A) Rust is due to formation of oxides (B) Cast iron oxidises less (C) Steel oxidises most (D) All the above

Last Answer : Answer: Option D

Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)

Last Answer : Answer: Option D

Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel

Last Answer : Answer: Option B

The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Last Answer : Answer: Option C

In soft clay of low bearing capacity, the type of steel pile generally used, is (A) H-pile (B) Screw pile (C) Disc pile (D) Pipe pile

Description : In soft clay of low bearing capacity, the type of steel pile generally used, is (A) H-pile (B) Screw pile (C) Disc pile (D) Pipe pile

Last Answer : Answer: Option B

Entire cell is enclosed by a steel casing that is protected usually by _____ and _____. • Nickel, chromium • Chromium, molybdenum • Aluminium, molybdenum • Nickel, aluminium

Description : Entire cell is enclosed by a steel casing that is protected usually by _____ and _____. • Nickel, chromium • Chromium, molybdenum • Aluminium, molybdenum • Nickel, aluminium

Last Answer : • Chromium, molybdenum

Semi steel' is (A) Produced by adding 10-20% steel to the cupola charge (B) Stronger than cast iron (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Semi steel' is (A) Produced by adding 10-20% steel to the cupola charge (B) Stronger than cast iron (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Shares are make of a) Chilled cast iron b) Steel c) Both d) None

Description : Shares are make of a) Chilled cast iron b) Steel c) Both d) None

Last Answer : Both

The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Description : The coefficient of static friction will have the highest value in case of a.Mild steel and mild steel b.Mild steel and copper c.Cast iron and steel d.Rope and wood e.Any of the above loctions

Last Answer : d. Rope and wood

Why does a stainless steel griddle always stick where a cast iron one does not?

Description : Why does a stainless steel griddle always stick where a cast iron one does not?

Last Answer : Cast iron cookware becomes seasoned through use. This makes foods stick less. Stainless steel griddles don't have that seasoned finish so they need to be oiled with each use.

Alloy steel containing chromium to resist rusting is known as (a) wrought iron (b) cast iron (c) hard steel (d) stainless steel

Description : Alloy steel containing chromium to resist rusting is known as (a) wrought iron (b) cast iron (c) hard steel (d) stainless steel

Last Answer : Ans:(d)

Alloy steel containing chromium, to resist rusting, is known as (a) Wrought iron (b) Cast iron (c) Hard steel (d) Stainless steel

Description : Alloy steel containing chromium, to resist rusting, is known as (a) Wrought iron (b) Cast iron (c) Hard steel (d) Stainless steel

Last Answer : Ans:(d)

Sand may be used as ballast for A. Wooden sleeper B. Cast iron sleeper C. Steel sleeper D. None of These

Description : Sand may be used as ballast for A. Wooden sleeper B. Cast iron sleeper C. Steel sleeper D. None of These

Last Answer : B [Cast iron sleeper]

Coal ash (or cinder) is used in initial stages of a new construction of railway for A. Wooden sleeper B. Steel sleeper C. Cast iron sleeper D. None of These

Description : Coal ash (or cinder) is used in initial stages of a new construction of railway for A. Wooden sleeper B. Steel sleeper C. Cast iron sleeper D. None of These

Last Answer : A [Wooden sleeper]

Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Description : Which one of the following contains maximum percentage of carbon? (1) Cast iron (2) Stainless steel (3) Wrought iron (4) High speed steel

Last Answer : (1) Cast iron Explanation: Cast Iron is a hard, brittle, nonmalleable iron-carbon alloy, cast into shape, containing 2 to 4.5 percent carbon. Steels contain less than 2% and usually less than 1% carbon, ... percent carbon. Wrought iron is an iron alloy with very low carbon (0.04 to 0.08%) content.

The purest form of Iron is : (1) Cast iron (2) Steel (3) Pig iron (4) Wrought iron

Description : The purest form of Iron is : (1) Cast iron (2) Steel (3) Pig iron (4) Wrought iron

Last Answer : (4) Wrought iron Explanation: Wrought iron is an iron alloy with a very low carbon content in Contrast to steel, and has fibrous inclusions, known as slag. This is what gives it a " ... qualifies because current standards for commercially pure iron require a carbon content of less than 0.008 wt%.

Which is the purest form of iron? (1) Steel (2) Cast iron (3) Pig iron (4) Wrought iron

Description : Which is the purest form of iron? (1) Steel (2) Cast iron (3) Pig iron (4) Wrought iron

Last Answer : (4) Wrought iron Explanation: Iron is a chemical element with the symbol Fe and atomic number 26. It is a metal in the first transition series. It is the most common element (by mass) forming the ... the Earth's crust. Wrought iron is the purest form of iron. It contains less than 0.25% carbon.

Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Description : Supporting legs of a plate and frame filter is normally made of (A) Stainless steel (B) Cast iron (C) High speed steel (D) Wooden plank

Last Answer : (B) Cast iron

Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel

Last Answer : (B) Lead

The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Description : The fermenter used in the production of penicillin (by deep fermentation process) is made of (A) Glass (B) Glass lined steel (C) High silicon cast iron (D) Porcelain

Last Answer : (B) Glass lined steel

SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Description : SO3 is absorbed using H2SO4 in a (A) Cast iron packed tower (B) Stainless steel plate tower (C) Packed steel tower lined with acid proof bricks (D) None of these

Last Answer : (C) Packed steel tower lined with acid proof bricks

Which one contains the least percentage of carbon?(A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Description : Which one contains the least percentage of carbon? (A) Wrought iron (B) High speed steel (C) Cast iron (D) Pig iron

Last Answer : (A) Wrought iron

The carbonating tower used in Solvay process of soda ash manufactureis made of(A) Cast iron(B) Stainless steel(C) Karbate(D) Lead lined steel

Description : The carbonating tower used in Solvay process of soda ash manufactureis made of (A) Cast iron (B) Stainless steel (C) Karbate (D) Lead lined steel

Last Answer : (A) Cast iron

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin