In order of increasing percentage of silica, the correct sequence is (A) Sandy clay, calcareous clay, pure clay (B) Calcareous clay, pure clay, sandy clay (C) Pure clay, sandy clay, calcareous clay (D) None of these

In order of increasing percentage of silica, the correct sequence is
(A) Sandy clay, calcareous clay, pure clay
(B) Calcareous clay, pure clay, sandy clay
(C) Pure clay, sandy clay, calcareous clay
(D) None of these
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Description : Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Last Answer : Answer: Option B

The percentage of alumina and silica in good fire clay vary respectively is (A) 25, 75 (B) 30, 70 (C) 35, 65 (D) All of these

Description : The percentage of alumina and silica in good fire clay vary respectively is (A) 25, 75 (B) 30, 70 (C) 35, 65 (D) All of these

Last Answer : Answer: Option A

The rocks in which argil (or clay) predominates, are called (A) Siliceous rocks (B) Argillaceous rocks (C) Calcareous rocks (D) Igneous rocks

Description : The rocks in which argil (or clay) predominates, are called (A) Siliceous rocks (B) Argillaceous rocks (C) Calcareous rocks (D) Igneous rocks

Last Answer : Answer: Option B

The rocks having alumina or clay as their major constituents are known as (A) Siliceous rocks (B) Argillaceous rocks (C) Calcareous rocks (D) Sedimentary rocks

Description : The rocks having alumina or clay as their major constituents are known as (A) Siliceous rocks (B) Argillaceous rocks (C) Calcareous rocks (D) Sedimentary rocks

Last Answer : Answer: Option B

Lowest pore space percentage recorded in — soil a. Clay b. Clay loam c. Loamy d. Sandy

Description : Lowest pore space percentage recorded in — soil a. Clay b. Clay loam c. Loamy d. Sandy

Last Answer : d. Sandy

The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Description : The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Last Answer : (D) Clay soils

The minimum depth of building foundations on (A) Sandy soils is 80 cm to 100 cm (B) Clay soils is 90 cm to 160 cm (C) Rocky soils is 5 cm to 50 cm (D) All the above

Description : The minimum depth of building foundations on (A) Sandy soils is 80 cm to 100 cm (B) Clay soils is 90 cm to 160 cm (C) Rocky soils is 5 cm to 50 cm (D) All the above

Last Answer : Answer: Option D

Rotary drilling is the fastest method in case of (A) Rocky soils (B) Clay soils (C) Sandy soil (D) All of these

Description : Rotary drilling is the fastest method in case of (A) Rocky soils (B) Clay soils (C) Sandy soil (D) All of these

Last Answer : Answer: Option D

The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Description : The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Last Answer : Answer: Option B

Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided (A) Silica (B) Mud (C) Clay (D) Organic matter

Description : Standard unit of turbidity of water is in one litre of distilled water, one milligram of finely divided  (A) Silica  (B) Mud  (C) Clay  (D) Organic matter 

Last Answer : (A) Silica 

The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Description : The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Last Answer : Answer: Option C

Consider the following types of turbines: 1. Francis 2. Pelton with a single jet 3. Kaplan The correct sequence of these turbines in increasing order of their specific speeds is (a) 1, 3 & 2 (b) 2, 1 & 3 (c) 1, 2 & 3 (d) 2, 3 & 1

Description : Consider the following types of turbines: 1. Francis 2. Pelton with a single jet 3. Kaplan The correct sequence of these turbines in increasing order of their specific speeds is (a) 1, 3 & 2 (b) 2, 1 & 3 (c) 1, 2 & 3 (d) 2, 3 & 1

Last Answer : (b) 2, 1 & 3

Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Description : Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Last Answer : Answer: Option D

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the footing. 3. Size effects in plate load tests are more important in case of cohesionless soils. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. The benefit of surcharge and depth of foundation is only marginal in case of footings on purely cohesive soils. 2. The bearing capacity of a footing in pure clay increases with increase in size of the ... , 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (d) 1 & 3 only

Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 percent (C) Roughly 1 to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Description : Pick up the correct statement from the following: (A) The percentage of absorption for firebricks varies from 5 to 10 (B) The percentage of silica in silica bricks is to the extent of about 95 to 97 ... to 2 percent of lime in silica bricks is added to act as binding material (D) All the above

Last Answer : Answer: Option D

Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water is an important consideration for selecting a coagulant Which of the following statements are correct ? a) 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : a) 1, 2 and 3

Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Description : Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Last Answer : Ans: (b)

Which of the following characteristics is not true of alluvial soils? (a) These vary from sandy loam to clay in texture (b) These are generally rich in phosphorus but poor in potash (c) These are usually fine grained (d) These are by far the most fertile

Description : Which of the following characteristics is not true of alluvial soils? (a) These vary from sandy loam to clay in texture (b) These are generally rich in phosphorus but poor in potash (c) These are usually fine grained (d) These are by far the most fertile

Last Answer : Ans: (b)

The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Description : The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Last Answer : Ans: (a)

Which of the following are the components of loamy soils? 1. Red soil 2. Clay soil 3. Alluvial soil 4. Silt soil 5. Sandy soil In d i a n So i l , Se a s o n s a n d N a t u r a l Ve g e t a t i o n (a) I and II (b) I, III and IV (c) II and V (d) II, III and V

Description : Which of the following are the components of loamy soils? 1. Red soil 2. Clay soil 3. Alluvial soil 4. Silt soil 5. Sandy soil In d i a n So i l , Se a s o n s a n d N a t u r a l Ve g e t a t i o n (a) I and II (b) I, III and IV (c) II and V (d) II, III and V

Last Answer : Ans: (c)

Clay soils require: a. A longer time for absorption of irrigation water than sandy soils b. A shorter time for absorption of irrigation water than sandy soils c. About the same time for absorption of irrigation water as sandy soils d. More or less time for absorption than sandy soils, depending on the pH of the clay

Description : Clay soils require: a. A longer time for absorption of irrigation water than sandy soils b. A shorter time for absorption of irrigation water than sandy soils c. About the same time for absorption of ... soils d. More or less time for absorption than sandy soils, depending on the pH of the clay

Last Answer : A longer time for absorption of irrigation water than sandy soils

. Which soil has highest efficiency? (A)Loamy soil (B) Sandy soil (C) Clay soil (D) None of these

Description : . Which soil has highest efficiency? (A)Loamy soil (B) Sandy soil (C) Clay soil (D) None of these

Last Answer : (C) Clay soil

Which soil has highest efficiency? (A)Loamy soil (B) Sandy soil (C) Clay soil (D) None of these

Description : Which soil has highest efficiency? (A)Loamy soil (B) Sandy soil (C) Clay soil (D) None of these

Last Answer : (C) Clay soil

Which of the following soil type is most suitable for garlic cultivation ? (A) Loamy sand (B) Sandy loam (C) Loam (D) Clay

Description : Which of the following soil type is most suitable for garlic cultivation ? (A) Loamy sand (B) Sandy loam (C) Loam (D) Clay

Last Answer : (B) Sandy loam

Rabi Oilseeds Mustard can be grown under which soil? a. Heavy clay soil b. Light loam c. Light sandy soil d. All of the above e. None of the above

Description : Rabi Oilseeds Mustard can be grown under which soil? a. Heavy clay soil b. Light loam c. Light sandy soil d. All of the above e. None of the above

Last Answer : e. None of the above

Wind Erosion will be higher from? a. Clay Soil b. Sandy Soil c. A barren sandy soil d. Loam Soil e. None of these

Description : Wind Erosion will be higher from? a. Clay Soil b. Sandy Soil c. A barren sandy soil d. Loam Soil e. None of these

Last Answer : c. A barren sandy soil

Which of the following soil texture is lighter than others? a Silty clay loam. b Clay loam. c Sandy loam. d Loamy sand.

Description : Which of the following soil texture is lighter than others? a Silty clay loam. b Clay loam. c Sandy loam. d Loamy sand.

Last Answer : d Loamy sand.

Alluvial soils vary in nature from sandy loam to clay. They are generally - a. poor in potash and rich in phosphorus b. poor in both potash and phosphorus c. rich in both potash and phosphorus d. rich in potash and poor in phosphorus

Description : Alluvial soils vary in nature from sandy loam to clay. They are generally - a. poor in potash and rich in phosphorus b. poor in both potash and phosphorus c. rich in both potash and phosphorus d. rich in potash and poor in phosphorus

Last Answer : d. rich in potash and poor in phosphorus

Split application of fertilizer is useful in — soils. a. Clay b. Loamy c. Sandy d. None of these

Description : Split application of fertilizer is useful in — soils. a. Clay b. Loamy c. Sandy d. None of these

Last Answer : c. Sandy

Rapid infiltration rate is recorded in — soil a. Clay b. Loamy soil c. Sandy soil d. None of these

Description : Rapid infiltration rate is recorded in — soil a. Clay b. Loamy soil c. Sandy soil d. None of these

Last Answer : c. Sandy soil

performance of naphthalic anhydride against EPTC was marginal in which type of soils a).clay b). clay loam c). loamy d). sandy silt

Description : performance of naphthalic anhydride against EPTC was marginal in which type of soils a).clay b). clay loam c). loamy d). sandy silt

Last Answer : d). sandy silt

Herbicide leaching is prominent in a). Sandy b). Sandy loam c). Clay loam d). loam

Description : Herbicide leaching is prominent in a). Sandy b). Sandy loam c). Clay loam d). loam

Last Answer : a). Sandy

Highly soluble herbicides like 2,4-D salt, Dalapon and TCA have to be avoided in which of the soil type a). Peat b). Red c). Clay d). Sandy

Description : Highly soluble herbicides like 2,4-D salt, Dalapon and TCA have to be avoided in which of the soil type a). Peat b). Red c). Clay d). Sandy

Last Answer : d). Sandy

Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Description : Pick up the correct statement from the following: (A) Sand stones may be divided into calcareous, siliceous and ferruginous sand stones (B) Concrete using sand stones, cracks due to excessive shrinkage (C) Broken bricks produce a concrete having good fire resisting qualities (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Description : Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Last Answer : (D) None of these

The fire clay contains pure (A) Lime (B) Oxide of iron (C) Hydrated aluminium silicate (D) Magnesium

Description : The fire clay contains pure (A) Lime (B) Oxide of iron (C) Hydrated aluminium silicate (D) Magnesium

Last Answer : Answer: Option C

Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Description : Portland cement manufactured from pure white chalk and clay but free from iron-oxide, is known as (A) Quick setting cement (B) Rapid hardening cement (C) White cement (D) Low heat Portland cement

Last Answer : Answer: Option C

For preparing porcelains, the clay should be (A) Sufficiently pure (B) Of high degree of tenacity (C) Of good plasticity (D) All the above

Description : For preparing porcelains, the clay should be (A) Sufficiently pure (B) Of high degree of tenacity (C) Of good plasticity (D) All the above

Last Answer : Answer: Option D

Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Description : Coke oven walls are lined with __________ bricks. (A) Silica (B) Tar-dolomite (C) Low thermal conductivity (D) Fire clay

Last Answer : (A) Silica

Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Description : Which of the following adsorbent is used in the refining of sugar? (A) Bone charcoal (B) Wood charcoal (C) Silica gel (D) Activated clay

Last Answer : (A) Bone charcoal

The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Description : The maximum percentage of chemical ingredient of cement is that of (A) Magnesium oxide (B) Iron oxide (C) Silica (D) Lime

Last Answer : Answer: Option D

The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Description : The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Last Answer : Answer: Option D

Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Description : Percentage content of silica in window glass, is (A) 40 to 45 (B) 50 to 55 (C) 60 to 65 (D) 70 to 75

Last Answer : Answer: Option D

Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Description : Percentage of silica in a good brick earth lies between (A) 5 to 10 % (B) 20 to 30 % (C) 50 to 60 % (D) 70 to 80

Last Answer : Answer: Option C

The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Description : The maximum percentage of chemical ingredient of cement is (a) Alumina (b) Iron oxide (c) Lime (d) Silica

Last Answer : (c) Lime

The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Description : The minimum percentage of chemical ingredient of cement is [ A ] Iron oxide [ B ] Silica [ C ] Lime [ D ] Magnesium oxide

Last Answer : [ D ] Magnesium oxide