Pick up the correct statement from the following: (A) Sandy clayloam contains highest percentage of sand (B) Silty clayloam contains highest percentage of silt (C) Stiff boulder clay offers maximum shear strength (D) Soft chalk carries least safe load

Pick up the correct statement from the following:
(A) Sandy clayloam contains highest percentage of sand
(B) Silty clayloam contains highest percentage of silt
(C) Stiff boulder clay offers maximum shear strength
(D) Soft chalk carries least safe load
by

1 Answer

Answer :

Answer: Option B
by

Related questions

Which of the following soil texture is lighter than others? a Silty clay loam. b Clay loam. c Sandy loam. d Loamy sand.

Description : Which of the following soil texture is lighter than others? a Silty clay loam. b Clay loam. c Sandy loam. d Loamy sand.

Last Answer : d Loamy sand.

Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The chloride in sea shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Description : Pick up the correct statement from the following: (A) Sand obtained from pits, is washed to remove clay and silt (B) Sand obtained from flooded pits, need not be washed before use (C) The ... shore sand and shingle may cause corrosion of reinforcement if the concrete is porous (D) All the above

Last Answer : Answer: Option D

The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Description : The liquid limit and plastic limit exist in (A) Sandy soils (B) Silty soils (C) Gravel soils (D) Clay soils

Last Answer : (D) Clay soils

The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Description : The soil which is a mixture of sand, clay and silt is known as: (a) loamy soil (b) sandy soil (c) clayey soil (d) desert soil

Last Answer : Ans: (a)

Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio of shear strength in natural state to the remoulded shear strength under undrained conditions is called degree of sensitivity (C) The difference between the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Description : Pick up the correct statement from the following: (A) The property of a soil that enables it to become stiff in a relatively short time on standing is called thixotropy (B) The ratio ... the undisturbed shear strength and remoulded shear strength is known remoulding loss (D) All the above

Last Answer : (D) All the above

The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Description : The soil which contains finest grain particles, is (A) Coarse sand (B) Fine sand (C) Silt (D) Clay

Last Answer : (D) Clay

The specific retention is least in case of (A) Clay (B) Sand (C) Silt (D) Coarse gravel

Description : The specific retention is least in case of (A) Clay (B) Sand (C) Silt (D) Coarse gravel

Last Answer : (D) Coarse gravel

The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Description : The most suitable material for the central impervious core of a zoned embankment type dam is (A) Clay (B) Coarse sand (C) Silty clay (D) Clay mixed with fine sand

Last Answer : Answer: Option D

The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Description : The least bearing capacity of soil is that of (A) Hard rock (B) Moist clay (C) Soft rock (D) Coarse sandy soil

Last Answer : Answer: Option B

………….. soil has the least SBC of the soil. a) Hard moorum b) Stiff clay c) Black cotton soil* d) Soft rock

Description : ………….. soil has the least SBC of the soil. a) Hard moorum b) Stiff clay c) Black cotton soil* d) Soft rock

Last Answer : c) Black cotton soil*

Match the following : A. Chernozems 1. Rich in calcium carbonate B. Black soil 2. Contains aluminium compound C. Laterite 3. Richest soils in the world D. Terra Rosa 4. Formed in limestone E. Alluvial soil 5. It is a mixture of clay, sand and silt A B C D E (a) 1 2 3 4 5 (b) 3 1 2 4 5 (c) 4 5 3 1 2 (d) 3 4 5 2 1

Description : Match the following : A. Chernozems 1. Rich in calcium carbonate B. Black soil 2. Contains aluminium compound C. Laterite 3. Richest soils in the world D. Terra Rosa 4. Formed in limestone E. Alluvial soil 5. It is a mixture of clay, sand and ... 1 2 3 4 5 (b) 3 1 2 4 5 (c) 4 5 3 1 2 (d) 3 4 5 2 1

Last Answer : Ans: (b)

Which of the following are the components of loamy soils? 1. Red soil 2. Clay soil 3. Alluvial soil 4. Silt soil 5. Sandy soil In d i a n So i l , Se a s o n s a n d N a t u r a l Ve g e t a t i o n (a) I and II (b) I, III and IV (c) II and V (d) II, III and V

Description : Which of the following are the components of loamy soils? 1. Red soil 2. Clay soil 3. Alluvial soil 4. Silt soil 5. Sandy soil In d i a n So i l , Se a s o n s a n d N a t u r a l Ve g e t a t i o n (a) I and II (b) I, III and IV (c) II and V (d) II, III and V

Last Answer : Ans: (c)

performance of naphthalic anhydride against EPTC was marginal in which type of soils a).clay b). clay loam c). loamy d). sandy silt

Description : performance of naphthalic anhydride against EPTC was marginal in which type of soils a).clay b). clay loam c). loamy d). sandy silt

Last Answer : d). sandy silt

Pick up the correct statement from the following: (A) Failure plane carries maximum shear stress (B) Failure plane does not carry maximum shear stress (C) Failure plane carries shear stress equal to maximum shear stress (D) None of these

Description : Pick up the correct statement from the following: (A) Failure plane carries maximum shear stress (B) Failure plane does not carry maximum shear stress (C) Failure plane carries shear stress equal to maximum shear stress (D) None of these

Last Answer : Option B

The stone whose crushing strength is maximum, is (A) Granite (B) Chalk (C) Slate (D) Sand stone

Description : The stone whose crushing strength is maximum, is (A) Granite (B) Chalk (C) Slate (D) Sand stone

Last Answer : Answer: Option A

(C)A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Description : A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Last Answer : (C) Coarse gravel

A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Description : A well is considered to be good if it is sunk into (A) Clay (B) Sand (C) Coarse gravel (D) Silt

Last Answer : (C) Coarse gravel

Which of the following soils has more plasticity index? (A) Sand (B) Silt (C) Clay (D) Gravel

Description : Which of the following soils has more plasticity index? (A) Sand (B) Silt (C) Clay (D) Gravel

Last Answer : (C) Clay

If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Description : If the permeability of a soil is 0.8 mm/sec, the type of soil is (A) Gravel (B) Sand (C) Silt (D) Clay

Last Answer : (B) Sand

the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Description : the plasticity index of a soil mass is zero, the soil is (A) Sand (B) Silt (C) Clay (D) Clayey silt

Last Answer : (A) Sand

Cohesionless soil is (A) Sand (B) Silt (C) Clay (D) Clay and silt

Description : Cohesionless soil is (A) Sand (B) Silt (C) Clay (D) Clay and silt

Last Answer : (A) Sand

The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index (C) Decrease in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Description : The admixture of coarser particles like sand or silt to clay causes (A) Decrease in liquid limit and increase in plasticity index (B) Decrease in liquid limit and no change in plasticity index ... in both liquid limit and plasticity index (D) Increase in both liquid limit and plasticity index

Last Answer : Answer: Option C

Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Description : Which of the following is the correct order of increasing size of the grains of soil particles? 1. Clay 2. Silt 3. Sand 4. Gravel (a) BCDA (b) ABCD (c) DCBA (d) ADCB

Last Answer : Ans: (b)

Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no plasticity (C) The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Description : Pick up the correct statement about silt soil from the following: (A) The silt soil has particle size from 0.02 mm to 0.06 mm (B) In organic fine grained silt soil possesses no ... The least plastic type normally consists of more or less equidimensional grains of quartz (D) All the above

Last Answer : Answer: Option D

In order of increasing percentage of silica, the correct sequence is (A) Sandy clay, calcareous clay, pure clay (B) Calcareous clay, pure clay, sandy clay (C) Pure clay, sandy clay, calcareous clay (D) None of these

Description : In order of increasing percentage of silica, the correct sequence is (A) Sandy clay, calcareous clay, pure clay (B) Calcareous clay, pure clay, sandy clay (C) Pure clay, sandy clay, calcareous clay (D) None of these

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) A maximum value of dry density is obtained at optimum water content (B) At low value of water content most soils tend to be stiff (C) At high water content, the dry density decreases with an increase of water content (D) All the above

Description : Pick up the correct statement from the following: (A) A maximum value of dry density is obtained at optimum water content (B) At low value of water content most soils tend to be stiff (C) At high water content, the dry density decreases with an increase of water content (D) All the above

Last Answer : Answer: Option D

Which of the following soil type has the highest field capacity ? (A) Loam (B) Silty loam (C) Clayey loam (D) Clay

Description : Which of the following soil type has the highest field capacity ? (A) Loam (B) Silty loam (C) Clayey loam (D) Clay

Last Answer : (D) Clay

Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. 3. Angle of internal friction  is zero, with some value of cohesion c. Which of these statements is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Description : Consider the following statements: For pure clay, the shear strength parameters will be 1. Cohesion c = 0; and angle of internal friction  will be maximum. 2. Cohesion c is maximum; and angle of internal friction  is also maximum. ... is/are correct? (a) 1, 2 & 3 (b) 1 only (c) 3 only (d) 2 only

Last Answer : (c) 3 only

Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %

Description : Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm (C) The material having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Description : Pick up the correct statement from the following: (A) The maximum size of a coarse aggregate, is 75 mm and minimum 4.75 mm (B) The maximum size of the fine aggregate, is 4.75 mm and minimum 0.075 mm ( ... having particles of size varying from 0.06 mm to 0.002 mm, is known as silt (D) All the ab

Last Answer : Answer: Option D

Loess' is silty clay formed by the action of (A) Water (B) Glacier (C) Wind (D) Gravitational force

Description : Loess' is silty clay formed by the action of (A) Water (B) Glacier (C) Wind (D) Gravitational force

Last Answer : (C) Wind

What is the name of the soil that is 60 silt 20 sand and 20 clay?

Description : What is the name of the soil that is 60 silt 20 sand and 20 clay?

Last Answer : Need answer

What is a type of soil that has significant amounts of sand silt and clay.?

Description : What is a type of soil that has significant amounts of sand silt and clay.?

Last Answer : Loamy Soil.

The relative proportion of sand, silt and clay is termed as

Description : The relative proportion of sand, silt and clay is termed as

Last Answer : Ans. Soil texture

Deep black soil is productive due to high proportion of (a) sand and zinc (b) gravel and calcium (c) clay and humus (d) silt and earthworm.

Description : Deep black soil is productive due to high proportion of (a) sand and zinc (b) gravel and calcium (c) clay and humus (d) silt and earthworm.

Last Answer : (c) clay and humus

The relative proportion of sand, silt and clay is called (A) Soil texture (B) Soil aggregation (C) Soil structure (D) Soil taxonomy

Description : The relative proportion of sand, silt and clay is called (A) Soil texture (B) Soil aggregation (C) Soil structure (D) Soil taxonomy

Last Answer : (A) Soil texture

Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the rate of (P/4) + 3.0 percentage of water where P is the percentage of water for standard consistency (C) A cube mould of 10 cm × 10 cm × 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Description : Pick up the incorrect statement from the following. For performing compressive strength test of cement (A) Cement and standard sand mortar are used in the ratio of 1 : 3 (B) Water is added at the ... cm 10 cm is used (D) The prepared moulds are kept in a atmosphere of 50% relative humidity

Last Answer : Answer: Option A

The ratio of emax and emin of silty sand, is (A) 2.0 (B) 2.5 (C) 3.0 (D) 3.5

Description : The ratio of emax and emin of silty sand, is (A) 2.0 (B) 2.5 (C) 3.0 (D) 3.5

Last Answer : Answer: Option C

Which of the following soil type is most suitable for garlic cultivation ? (A) Loamy sand (B) Sandy loam (C) Loam (D) Clay

Description : Which of the following soil type is most suitable for garlic cultivation ? (A) Loamy sand (B) Sandy loam (C) Loam (D) Clay

Last Answer : (B) Sandy loam

Consider the following statements: 1. For a saturated soil, Skempton’s B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing strength in case of dense sand. Which of these statements are correct? (a) 1, 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Description : Consider the following statements: 1. For a saturated soil, Skempton's B-parameter is nearly equal to unity. 2. For an undisturbed sensitive clay, the stress-strain curve shows a peak. 3. Interlocking contributes significantly to the shearing ... 2 & 3 (b) 1 & 2 only (c) 2 & 3 only (d) 1 & 3 only

Last Answer : (a) 1, 2 & 3

Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Description : Pick up the incorrect statement from the following: (A) Porosity of clay sand soil is 45% (B) Porosity of pure sand is 35% (C) Porosity of sand stone is up to 15% (D) None of these

Last Answer : (D) None of these

The stone whose crushing strength is least, is (A) Granite (B) Chalk (C) Marble (D) Slate

Description : The stone whose crushing strength is least, is (A) Granite (B) Chalk (C) Marble (D) Slate

Last Answer : Answer: Option B

Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Description : Quicksand is a) Moist sand containing a small percentage of clay b) Is a condition which generally occurs in coarse sands c) Is a condition in which cohesive properties of soil increase rapidly d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

Last Answer : d) Is a condition in which a cohesion less soil loses its strength because of upward flow of water

The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Description : The steel pile which is generally sunk in soft clay or loose sand of low bearing capacity, is (A) H-pile (B) Pipe pile (C) Screw pile (D) Disc pile

Last Answer : Answer: Option C

Pick up the correct statement from the following: (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in the river, is called trap efficiency (B) Small capacity reservoirs on large rivers generally, silt less (C) Large capacity reservoirs on small rivers generally silt more (D) All the above

Description : Pick up the correct statement from the following:  (A) The ratio of the total sediment deposited in the reservoir to the total sediment flowing in  the river, is called trap efficiency  ( ... less  (C) Large capacity reservoirs on small rivers generally silt more  (D) All the above

Last Answer : (D) All the above

Which type of soil is best for knolkhol ? (A) Loam (B) Clayey loam (C) Silty clayey loam (D) Clay

Description : Which type of soil is best for knolkhol ? (A) Loam (B) Clayey loam (C) Silty clayey loam (D) Clay

Last Answer : (B) Clayey loam

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity index of the soil (C) Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Description : Pick up the correct statement from the following: (A) In soils, the flow index indicates variation in shear strength with water content (B) Liquid limit minus plastic limit, is known as plasticity ... Plastic limit minus shrinkage limit, is known as shrinkage index of the soil (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is more than that of coarse sand (C) If the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Description : Pick up the correct statement from the following: (A) Adding 5% to 6% of moisture content by weight, increases the volume of dry sand from 18% to 38% (B) The bulking of fine sand is ... the percentage content of moisture exceeds 10%, increase in bulk of sand starts increasing (D) All the above

Last Answer : Answer: Option D

Lowest pore space percentage recorded in — soil a. Clay b. Clay loam c. Loamy d. Sandy

Description : Lowest pore space percentage recorded in — soil a. Clay b. Clay loam c. Loamy d. Sandy

Last Answer : d. Sandy