Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Lime mortar is generally made with
(A) Quick lime
(B) Fat lime
(C) Hydraulic lime
(D) Plain lime
by

1 Answer

Answer :

Answer: Option C
by

Related questions

Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Description : Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Last Answer : Answer: Option D

Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Description : Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Last Answer : Answer: Option B (B) (ii) and (iii)

For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Description : For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Last Answer : Answer: Option A

The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Description : The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Last Answer : Answer: Option B

The commonly used lime in white washing, is (A) White lime (B) Fat lime (C) Hydraulic lime (D) Quick lime

Description : The commonly used lime in white washing, is (A) White lime (B) Fat lime (C) Hydraulic lime (D) Quick lime

Last Answer : Answer: Option B

Which of the following lime can set under water also a) Fat Lime b) Lean lime* c) Hydraulic line d) Quick lime

Description : Which of the following lime can set under water also a) Fat Lime b) Lean lime* c) Hydraulic line d) Quick lime

Last Answer : b) Lean lime*

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : (1) Slaked lime Explanation: Mortar is a workable paste used to bind construction blocks together and fill the gaps between them. The blocks may be stone, brick, cinder blocks, etc. Mortar becomes hard ... Mortar can also be used to fix, or point, masonry when the original mortar has washed away.

Mortar is a mixture of water, sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water, sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : Slaked lime

Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Description : Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Last Answer : Answer: Option D

The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Description : The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Last Answer : d) White lime*

Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Description : Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Last Answer : (D) All the above

The normal curing period for lime mortar, is: (A) 1 day (B) 3 days (C) 7 days (D) 10 days

Description : The normal curing period for lime mortar, is: (A) 1 day (B) 3 days (C) 7 days (D) 10 days

Last Answer : Answer: Option C

The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Description : The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Last Answer : Answer: Option A

For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Description : For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Last Answer : Answer: Option B

The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Description : The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Last Answer : Answer: Option D

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Description : The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Last Answer : b) Quicklime*

Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Description : Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Last Answer : Answer: Option D

The lime which contains high percentage of calcium oxide, is generally called (A) Fat lime (B) Rich lime (C) White lime (D) None of these

Description : The lime which contains high percentage of calcium oxide, is generally called (A) Fat lime (B) Rich lime (C) White lime (D) None of these

Last Answer : Answer: Option D

why put lime in the mortar?

Description : What is the role of lime in mortar? Why put it in?

Last Answer : If you don't put it in, it will crack quickly if I know it.

What is the ratio of slaked lime and sand in mortar ?

Description : What is the ratio of slaked lime and sand in mortar ?

Last Answer : Ratio is 1:3

Define lime mortar. Explain its Properties.

Description : Define lime mortar. Explain its Properties.

Last Answer : Lime Mortar:-Lime Mortar is a paste prepared by adding required quantity of water to a mixture of lime and fine aggregate like sand. Properties of Lime Mortar : 1)It should be capable of ... not develop cracks and they should be able  To maintain their appearance for a sufficiently long period.

Putty is (A) Made with finely powdered chalk and linseed oil (B) Used for fixing glass panes (C) Softened by a solution of pearl ash and quick-lime soaked in water (D) All the above

Description : Putty is (A) Made with finely powdered chalk and linseed oil (B) Used for fixing glass panes (C) Softened by a solution of pearl ash and quick-lime soaked in water (D) All the above

Last Answer : Answer: Option D

The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Description : The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Last Answer : Answer: Option C

If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Description : If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Last Answer : (D) 0.95

The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to(A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Description : The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to (A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Last Answer : (B) 1.5 m

Pick up the correct statement from the following: (A) Corrugated sheet iron is made by passing plain sheets between grooved rollers (B) Strength and stiffness of corrugated sheets are considerably increased (C) Corrugated sheets are generally used on slanting roofs (D) All the above

Description : Pick up the correct statement from the following: (A) Corrugated sheet iron is made by passing plain sheets between grooved rollers (B) Strength and stiffness of corrugated sheets are considerably increased (C) Corrugated sheets are generally used on slanting roofs (D) All the above

Last Answer : Answer: Option D

Which one of the following is an air binding material? (A) Gypsum (B) Acid-resistant cement (C) Quick lime (D) All of these

Description : Which one of the following is an air binding material? (A) Gypsum (B) Acid-resistant cement (C) Quick lime (D) All of these

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Slaked lime contains calcium hydroxide (B) Quick lime contains calcium oxide (C) Slaked lime may be obtained from quick lime (D) All the above

Description : Pick up the correct statement from the following: (A) Slaked lime contains calcium hydroxide (B) Quick lime contains calcium oxide (C) Slaked lime may be obtained from quick lime (D) All the above

Last Answer : Answer: Option D

Formula for quick lime, is (A) CaCO3 (B) Ca(OH)2 (C) CO3CO2 (D) None to thes

Description : Formula for quick lime, is (A) CaCO3 (B) Ca(OH)2 (C) CO3CO2 (D) None to thes

Last Answer : Answer: Option A

Quick lime (or caustic lime) (A) Is obtained by the calcination of pure lime stone (B) Has great affinity to moisture (C) Is amorphous (D) All the abov

Description : Quick lime (or caustic lime) (A) Is obtained by the calcination of pure lime stone (B) Has great affinity to moisture (C) Is amorphous (D) All the above

Last Answer : Answer: Option D

Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Description : Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Last Answer : Answer: Option C

Quick lime is (A) Calcium carbonate (B) Calcium oxide (C) Calcium hydroxide (D) None of the above

Description : Quick lime is (A) Calcium carbonate (B) Calcium oxide (C) Calcium hydroxide (D) None of the above

Last Answer : Answer: Option B

Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Description : Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Last Answer : Answer: Option D

For testing compressive and tensile strength of cement, the cement mortar is made by mixing cement and standard sand in the proportions of (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Description : For testing compressive and tensile strength of cement, the cement mortar is made by mixing cement and standard sand in the proportions of (A) 1 : 2 (B) 1 : 3 (C) 1 : 4 (D) 1 : 6

Last Answer : Answer: Option B

A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Description : A circular gravity aqueduct is not generally preferred to because of (A) Its maximum hydraulic mean depth (B) Maximum area per unit of wetted perimeter (C) Minimum cost of construction (D) Its proper support on the ground

Last Answer : (D) Its proper support on the ground

Pick up the correct statement from the following: (A) Air lift pumps are generally used for pumping water from deep wells (B) Jet pumps are generally used for pumping water from small wells (C) The hydraulic ram works on the principle of water hammer (D) All the above

Description : Pick up the correct statement from the following: (A) Air lift pumps are generally used for pumping water from deep wells (B) Jet pumps are generally used for pumping water from small wells (C) The hydraulic ram works on the principle of water hammer (D) All the above

Last Answer : (D) All the above

Pickup the incorrect statement from the following: (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line (B) The pressure conduits may be taken uphill upto a maximum height of 8.3 m (C) Aqueducts and tunnels sections are generally kept circular (D) None of these

Description : Pickup the incorrect statement from the following:  (A) The invert of pressure conduit is independent of the grade of the hydraulic gradient line  (B) The pressure conduits may be taken uphill ... m  (C) Aqueducts and tunnels sections are generally kept circular  (D) None of these 

Last Answer : (D) None of these 

Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) The on-shore wind helps to produce wave action as well as rise of M.S.L. (C) A falling hydraulic gradient occurs in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Description : Pick up the incorrect statement from the following: (A) As a wave of sea water approaches the coast line, it is generally accompanied by a drift of water in the direction of wave advance (B) ... in the direction of the wave (D) The wave while receding carries finer particles out to deep water

Last Answer : (C) A falling hydraulic gradient occurs in the direction of the wave

Hydraulic lime is not used in plastering because it may result in a) Blistering* b) Efflorescence c) Flaking d) Fluorescence

Description : Hydraulic lime is not used in plastering because it may result in a) Blistering* b) Efflorescence c) Flaking d) Fluorescence

Last Answer : a) Blistering*

Explain the manufacturing process of hydraulic lime.

Description : Explain the manufacturing process of hydraulic lime. 

Last Answer : 1. Burning of impure limestone / kankar containing clay containing less than 30 %. With coal or charcoal as fuel. 2. If soft limestone is used, it is powdered, mixed with clay in right proportion & ... long as it is protected from air & moisture. After slaking it should be used within a week. 

Pick up the correct statement from the following: (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours (B) Detention period for sedimentation tanks, using coagulants usually ranges between 2 to 4 hours(C) The horizontally flow velocity in sedimentation tanks, is generally limited to 0.3 m/minute (D) All the above

Description : Pick up the correct statement from the following:  (A) Detention period for plain sedimentation tanks ranges between 4 to 8 hours  (B) Detention period for sedimentation tanks, using coagulants usually ... in sedimentation tanks, is generally limited to 0.3 m/minute  (D) All the above

Last Answer : (D) All the above

Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range between (A) 100 to 250 (B) 250 to 500 (C) 500 to 750 (D) 750 to 1000

Description : Normal values of overflow rate for plain sedimentation tanks in litres/hr/m2 , generally range  between  (A) 100 to 250  (B) 250 to 500  (C) 500 to 750  (D) 750 to 1000 

Last Answer : (C) 500 to 750 

Which plain formed due to the weathering of lime stone? -Do You Know?

Description : Which plain formed due to the weathering of lime stone? -Do You Know?

Last Answer : answer:

Which plain formed due to the weathering of lime stone?

Description : Which plain formed due to the weathering of lime stone?

Last Answer : Karst plains

Which plain formed due to the weathering of lime stone?

Description : Which plain formed due to the weathering of lime stone?

Last Answer : Karst plains

Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Description : Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option B