Which of the following lime can set under water also a) Fat Lime b) Lean lime* c) Hydraulic line d) Quick lime

Which of the following lime can set under water also  
a) Fat Lime
b) Lean lime*
c) Hydraulic line
d) Quick lime
by

1 Answer

Answer :

b) Lean lime*
by

Related questions

The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Description : The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Last Answer : b) Quicklime*

For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Description : For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Last Answer : Answer: Option A

The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Description : The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Last Answer : Answer: Option B

Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Description : Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Last Answer : Answer: Option C

The commonly used lime in white washing, is (A) White lime (B) Fat lime (C) Hydraulic lime (D) Quick lime

Description : The commonly used lime in white washing, is (A) White lime (B) Fat lime (C) Hydraulic lime (D) Quick lime

Last Answer : Answer: Option B

The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Description : The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Last Answer : d) White lime*

Hydraulic lime is not used in plastering because it may result in a) Blistering* b) Efflorescence c) Flaking d) Fluorescence

Description : Hydraulic lime is not used in plastering because it may result in a) Blistering* b) Efflorescence c) Flaking d) Fluorescence

Last Answer : a) Blistering*

In arch bridges, Cracks/ lean/ bulge in parapet walls, Bulging or separation of spandrel from arch barrel, are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Description : In arch bridges, Cracks/ lean/ bulge in parapet walls, Bulging or separation of spandrel from arch barrel, are the signs of distressed bridge under a) Group I b) Group II* c) Both of the above d) None of the above

Last Answer : b) Group II*

Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Description : Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Last Answer : Answer: Option D

Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Description : Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Last Answer : Answer: Option B (B) (ii) and (iii)

Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Description : Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Last Answer : Answer: Option D

Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Description : Sand is mixed with lime to a) Reduced cost b) Reduced setting time c) Prevent shrinkage and cracking* d) Improve visual appearance

Last Answer : c) Prevent shrinkage and cracking

Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Description : Soundness test of cement is done to determine its a) Durability in seawater b) Free lime content* c) Iron oxide content d) Alumina content

Last Answer : b) Free lime content*

Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Description : Which of the following constituents impart plasticity to brick earth a) Alumina* b) Silica c) Lime d) Magnesia

Last Answer : a) Alumina*

The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Description : The main ingredients of Portland cement are a) Lime and silica* b) Lime and Alumina c) Alumina magnesia d) Silica and Alumina

Last Answer : a) Lime and silica*

Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur with resultant loss of weight. When weight loss exceeds 10–15% of body weight, the complications of malnutrition interact with disease processes, with increased morbidity and mortality rates. The goal of nutritional support is maintenance of body cell mass and limitation of weight loss to less than 10% preinjury. The major impact of nutritional support in the trauma patient is to aid host defense. Under-nutrition may compromise the available host defense mechanism and may thus increase the likelihood of invasive sepsis, multiple organ system failure, and death. Resuscitation, oxygenation and arrest

Description : Answer: b Metabolic response to injury results in increased energy expenditure. If energy intake is less than expenditure, oxidation of body fat stores and erosion of lean body mass will occur ... requirements, caloric requirements should be distributed at a ratio of 70% as glucose and 30% as fat

Last Answer : Which of the following statement(s) is/are true concerning body fuel reserves? a. The largest fuel reserve in the body is skeletal muscle b. Fat provides about 9 calories/gram c. Free glucose and glycogen stores are a trivial fuel reserve d. Body protein is a valuable storage form of energy

Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Description : Which type of following cement is used for mass concrete work a) High Alumina cement b) Quick setting cement c) Rapid hardening cement d) Low heat cement*

Last Answer : d) Low heat cement*

What is the full form of PQRS used for Track renewal works. a. Plasser quick Relaying system* b. Please quick return services c. Poor Quality renewal system d. None of above

Description : What is the full form of PQRS used for Track renewal works. a. Plasser quick Relaying system* b. Please quick return services c. Poor Quality renewal system d. None of above

Last Answer : a. Plasser quick Relaying system*

The term ____ can be used on the labels of foods that can be eaten frequently without exceeding dietary guidelines for one or more of these components: fat, saturated fat, cholesterol, sodium, and calories. a. free c. lean b. reduced d. low

Description : The term ____ can be used on the labels of foods that can be eaten frequently without exceeding dietary guidelines for one or more of these components: fat, saturated fat, cholesterol, sodium, and calories. a. free c. lean b. reduced d. low

Last Answer : d. low

The word ____ on a label, means that a product contains no amount of, or only trivial or “physiologically inconsequential” amounts of, one or more of these components: fat, saturated fat, cholesterol, sodium, sugars, and calories. a. Low c. Lean b. Free d. Reduced

Description : The word ____ on a label, means that a product contains no amount of, or only trivial or “physiologically inconsequential” amounts of, one or more of these components: fat, saturated fat, cholesterol, sodium, sugars, and calories. a. Low c. Lean b. Free d. Reduced

Last Answer : b. Free

The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Description : The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Last Answer : Answer: Option C

Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Description : Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Last Answer : Answer: Option D

The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Explain the manufacturing process of hydraulic lime.

Description : Explain the manufacturing process of hydraulic lime. 

Last Answer : 1. Burning of impure limestone / kankar containing clay containing less than 30 %. With coal or charcoal as fuel. 2. If soft limestone is used, it is powdered, mixed with clay in right proportion & ... long as it is protected from air & moisture. After slaking it should be used within a week. 

Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Description : Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above

Last Answer : (D) All the above

If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Description : If the unit weight of sand particles is 2.696 g/cc. and porosity in loose state is 44%, the critical hydraulic gradient for quick sand condition, is (A) 0.91 (B) 0.92 (C) 0.93 (D) 0.95

Last Answer : (D) 0.95

The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to(A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Description : The hydraulic head that would produce a quick condition in a sand stratum of thickness 1.5 m, specific gravity 2.67 and voids ratio 0.67 is equal to (A) 1.0 m (B) 1.5 m (C) 2.0 m (D) 3 m

Last Answer : (B) 1.5 m

The following instrument is used to set out a right angle (a) Cross staff (b) Optical staff (c) Prism square (d) None of the above (e) All the above*

Description : The following instrument is used to set out a right angle (a) Cross staff (b) Optical staff (c) Prism square (d) None of the above (e) All the above*

Last Answer : e) All the above*

Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set in between the head and the plate. c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Description : Renewal of slack rivets should be taken up in steel girder bridges: a) All rivets which are hand loose or which have lost 50% of their head by corrosion. b) All hammer loose rivets where corrosion has set ... . c) In end stiffeners when the percentage of hammer loose rivets is >30% d) All the above*

Last Answer : d) All the above*

Describe an activity to observe what happens when quick lime is added to water taken in a beaker. State two important observations and name the type of reaction taking place. -Chemistry

Description : Describe an activity to observe what happens when quick lime is added to water taken in a beaker. State two important observations and name the type of reaction taking place. -Chemistry

Last Answer : Answer. Aim: To observe what happens when quicklime is added to water taken in a beaker. Materials Required:- Quicklime (calcium oxide), water, beaker.Procedure: 1. Take 5 g of calcium oxide in a ... example for each of decomposion reaction carried out with help of (i) Electricity (ii) Heat (iii)

Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : (1) Slaked lime Explanation: Mortar is a workable paste used to bind construction blocks together and fill the gaps between them. The blocks may be stone, brick, cinder blocks, etc. Mortar becomes hard ... Mortar can also be used to fix, or point, masonry when the original mortar has washed away.

When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Description : When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Last Answer : (1) heat is liberated Explanation: When quick lime is added to water, then a chemical reaction takes places and slaked lime is formed, evolving heat in this process. It makes the water boil.

Which one among the following substances evolved heat when dissolved in water? (1) Glucose (2) Fructose (3) Quick lime (4) Salt peter

Description : Which one among the following substances evolved heat when dissolved in water? (1) Glucose (2) Fructose (3) Quick lime (4) Salt peter

Last Answer : (3) Quick lime Explanation: Quicklime is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. When limestone is heated, at about 1000° C it undergoes thermal decomposition.

Putty is (A) Made with finely powdered chalk and linseed oil (B) Used for fixing glass panes (C) Softened by a solution of pearl ash and quick-lime soaked in water (D) All the above

Description : Putty is (A) Made with finely powdered chalk and linseed oil (B) Used for fixing glass panes (C) Softened by a solution of pearl ash and quick-lime soaked in water (D) All the above

Last Answer : Answer: Option D

Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Description : Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Last Answer : Answer: Option D

When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Description : When quick lime is added to water (1) heat is liberated (2) heat is absorbed (3) temperature decreases (4) no heat change takes place

Last Answer :  heat is liberated

Mortar is a mixture of water, sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water, sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : Slaked lime

The concrete under water minimum grade of cement recommended by IS code a) M 10 b) M 15 c) M 20* d) M 25

Description : The concrete under water minimum grade of cement recommended by IS code a) M 10 b) M 15 c) M 20* d) M 25

Last Answer : c) M 20*

Periodicity of Under water inspection a) Once in a year b) Once in two years* c) Whenever high flood occurs d) Along with detailed inspection of SE/Br

Description : Periodicity of Under water inspection a) Once in a year b) Once in two years* c) Whenever high flood occurs d) Along with detailed inspection of SE/Br

Last Answer : b) Once in two years*

____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Description : ____ is defined as the set of technologies that can construct physical solid models from CAD data a.Rapid Production b.Rapid prototyping c.Lean Manufacturing d.Artificial intelligence

Last Answer : b.Rapid prototyping

“B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Description : “B” class station is provided only on (a) Single lines (b) Double line (c) On both single as well as double line* (d) None of them

Last Answer : c) On both single as well as double line*

For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m

Description : For new lines, width of formation in bank for N.G single line is (a) 3.35 m (b) 3.70 m* (c ) 5.25 m (e) 5.85 m

Last Answer : b) 3.70 m*

For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m

Description : For new lines, width of formation in cutting for N.G. single line is (a) 3.35 m* (b) 3.70 m (c) 5.25 m (d) 5.85 m

Last Answer : a) 3.35 m*

For new lines, width of formation in bank for M.G. single line is (a) 5.25 m (b) 5.85 m* (c ) 6.25 m (e) 6.85 m

Description : For new lines, width of formation in bank for M.G. single line is (a) 5.25 m (b) 5.85 m* (c ) 6.25 m (e) 6.85 m

Last Answer : (b) 5.85 m*

For new lines, width of formation in cutting for M.G. single line is (a) 5.25 m* (b) 5.85 m (c) 6.25 m (d) 6.85 m

Description : For new lines, width of formation in cutting for M.G. single line is (a) 5.25 m* (b) 5.85 m (c) 6.25 m (d) 6.85 m

Last Answer : (a) 5.25 m*

Number of Elastic clips used for one K to BG single line section having 13 length & concrete sleepers of M+7 sleeper density are (a) 5280 (b) 6160* (c) 6250 (d) 6500

Description : Number of Elastic clips used for one K to BG single line section having 13 length & concrete sleepers of M+7 sleeper density are (a) 5280 (b) 6160* (c) 6250 (d) 6500

Last Answer : (b) 6160*

Number of sleepers required having sleeper density of M+7 for one Km of BG single line is (a) 1360 (b) 1540* (c) 1660 (d) None of the above

Description : Number of sleepers required having sleeper density of M+7 for one Km of BG single line is (a) 1360 (b) 1540* (c) 1660 (d) None of the above

Last Answer : (b) 1540*

The number of standard rails (13 m) for one km. BG section single line section is (a) 120 (b) 154* (c) 168 (d) 196

Description : The number of standard rails (13 m) for one km. BG section single line section is (a) 120 (b) 154* (c) 168 (d) 196

Last Answer : (b) 154*

The centre to centre spacing formation width for double line section is (a) 4725 mm (b) 5025 (c) 5330* (d) 5500

Description : The centre to centre spacing formation width for double line section is (a) 4725 mm (b) 5025 (c) 5330* (d) 5500

Last Answer : c) 5330*