Study the following statements. (i) Hydraulic lime is suitable for white washing, (ii) Fat lime is suitable for whitewashing, (iii) Hydraulic lime is suitable for making mortar, (iv) Fat lime is suitable for making mortar.

Study the following statements.
 (i) Hydraulic lime is suitable for white washing,
 (ii) Fat lime is suitable for whitewashing,
 (iii) Hydraulic lime is suitable for making mortar,
 (iv) Fat lime is suitable for making mortar.
by

1 Answer

Answer :

Answer: Option B
(B) (ii) and (iii)
by

Related questions

Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Description : Lime mortar is generally made with (A) Quick lime (B) Fat lime (C) Hydraulic lime (D) Plain lime

Last Answer : Answer: Option C

Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Description : Pick up the incorrect statement from the following: (A) Hydraulic lime is generally obtained by burning kankar (B) Hydraulic lime sets slowly as compared to fat lime (C) Hydraulic lime is generally used in lime mortar (D) None of these

Last Answer : Answer: Option D

The commonly used lime in white washing, is (A) White lime (B) Fat lime (C) Hydraulic lime (D) Quick lime

Description : The commonly used lime in white washing, is (A) White lime (B) Fat lime (C) Hydraulic lime (D) Quick lime

Last Answer : Answer: Option B

The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Description : The commonly used lime in white washing is a) Hydraulic lime b) Slaked lime c) Plain lime d) White lime*

Last Answer : d) White lime*

Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, if cement mortar 1:6 is used\ Which of these statements are correct? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Description : Consider the following statements: Maximum slenderness ratio of load-bearing masonry walls for a dwelling having more than two storeys shall not exceed. 1. 12, if lime mortar is used 2. 18, if cement-lime mortar 1:2:9 is used 3. 24, ... ? (a) 1 and 2 only b) 2 and 3 only c) 1 and 3 only d)1, 2 and 3

Last Answer : b) 2 and 3 only

For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Description : For construction of structures under water, the type of lime used, is (A) Hydraulic lime (B) Fat lime (C) Quick lime (D) Pure lime

Last Answer : Answer: Option A

The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Description : The lime which contains mainly calcium oxide and slacks with water, is (A) Fat lime (B) Quick lime (C) Hydraulic lime (D) Poor lime

Last Answer : Answer: Option B

Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to river flow The correct answer is (A) (i) and (ii) (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Description : Study the following statements. (i) Levees are constructed parallel to river flow (ii) Spurs are constructed parallel to river flow (iii) Levees are constructed transverse to river flow (iv) Spurs are constructed transverse to ... (B) (i) and (iv) (C) (ii) and (iii) (D) (iii) and (iv)

Last Answer : Answer: Option B

The normal curing period for lime mortar, is: (A) 1 day (B) 3 days (C) 7 days (D) 10 days

Description : The normal curing period for lime mortar, is: (A) 1 day (B) 3 days (C) 7 days (D) 10 days

Last Answer : Answer: Option C

The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Description : The proportions of lime and sand in the mortar normally used in brick construction are (A) 1 : 2 (B) 1 : 4 (C) 1 : 6 (D) 1 : 8

Last Answer : Answer: Option A

For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Description : For brick construction, the lime-sand mortar, is (A) 1 : 1 (B) 1 : 2 (C) 1 : 3 (D) 1 : 4

Last Answer : Answer: Option B

The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Description : The mortar in which both cement and lime are used as binding materials, is called (A) Cement mortar (B) Lime mortar (C) Fire resistant mortar (D) Gauged mortar

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed plan should be provided (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Description : Pick up the correct statement from the following: (A) Lime mortar with cement in the ratio of in 10 is cheaper and better for outside plaster (B) For very cold or very hot climate, a compact and closed ... (C) On the sea coast, an exposed and open house is generally preferred (D) All the above

Last Answer : Answer: Option D

Which of the following lime can set under water also a) Fat Lime b) Lean lime* c) Hydraulic line d) Quick lime

Description : Which of the following lime can set under water also a) Fat Lime b) Lean lime* c) Hydraulic line d) Quick lime

Last Answer : b) Lean lime*

The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Description : The lime which contains mainly calcium oxide and slacks with water, is known as a) Fat lime b) Quicklime* c) Hydraulic lime d) Poor line

Last Answer : b) Quicklime*

The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Description : The minimum percentage of silica, alumina and ferric oxide in lime for white washing, is (A) 20 (B) 15 (C) 5 (D) 0

Last Answer : Answer: Option D

Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Description : Quick lime (A) Generates heat when added to water (B) Reacts with carbon dioxide (C) May be used for white-washing (D) All the above

Last Answer : Answer: Option D

Which of the following salts do not have the water of crystalisation? (i) Bleaching Powder (ii) Plaster of Paris (iii) washing soda (iv) Baking soda (a) (ii) and (iv) (b) (i) and (iii) (c) (ii) and (iii) (d) (i) and (iv)

Description : Which of the following salts do not have the water of crystalisation? (i) Bleaching Powder (ii) Plaster of Paris (iii) washing soda (iv) Baking soda (a) (ii) and (iv) (b) (i) and (iii) (c) (ii) and (iii) (d) (i) and (iv)

Last Answer : (d) (i) and (iv)

The lime which contains high percentage of calcium oxide, is generally called (A) Fat lime (B) Rich lime (C) White lime (D) None of these

Description : The lime which contains high percentage of calcium oxide, is generally called (A) Fat lime (B) Rich lime (C) White lime (D) None of these

Last Answer : Answer: Option D

why put lime in the mortar?

Description : What is the role of lime in mortar? Why put it in?

Last Answer : If you don't put it in, it will crack quickly if I know it.

What is the ratio of slaked lime and sand in mortar ?

Description : What is the ratio of slaked lime and sand in mortar ?

Last Answer : Ratio is 1:3

Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : (1) Slaked lime Explanation: Mortar is a workable paste used to bind construction blocks together and fill the gaps between them. The blocks may be stone, brick, cinder blocks, etc. Mortar becomes hard ... Mortar can also be used to fix, or point, masonry when the original mortar has washed away.

Define lime mortar. Explain its Properties.

Description : Define lime mortar. Explain its Properties.

Last Answer : Lime Mortar:-Lime Mortar is a paste prepared by adding required quantity of water to a mixture of lime and fine aggregate like sand. Properties of Lime Mortar : 1)It should be capable of ... not develop cracks and they should be able  To maintain their appearance for a sufficiently long period.

Mortar is a mixture of water, sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Description : Mortar is a mixture of water, sand and (1) Slaked lime (2) Quick lime (3) Limestone (4) Gypsum

Last Answer : Slaked lime

The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Description : The main constituent which imparts hydraulicity to hydraulic lime is (A) Calcium oxide (B) Silica (C) Clay (D) Water

Last Answer : Answer: Option C

Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Description : Lime putty (A) Is made from hydraulic lime (B) Is made by adding lime to water (C) Can be used only upto three days (D) All of above

Last Answer : Answer: Option D

Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Description : Hydraulic lime is obtained by (A) Burning of lime stone (B) Burning of kankar (C) Adding water to quick lime (D) Calcination of pure clay

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Description : Pick up the correct statement from the following: (A) Quick lime is obtained by burning pure lime stone (B) Hydraulic lime is obtained by burning lime stone containing clay 5% to 30% (C) Poor lime is obtained by burning lime stone containing impurities more than 5% (D) All the above

Last Answer : Answer: Option D

The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is soft (iv) Loaded draft +1.8 m when bottom is rock Of these statements (A) (i) and (ii) are correct (B) (i) and (iii) are correct (C) (ii) and (iv) are correct (D) (iii) and (iv) are correct

Description : The maximum harbour depth below lowest low water is generally equal to (i) Loaded draft +1.2 m when bottom is rock (ii) Loaded draft +1.8 m when bottom is soft (iii) Loaded draft +1.2 m when bottom is ... ) and (iii) are correct (C) (ii) and (iv) are correct (D) (iii) and (iv) are correct

Last Answer : (D) (iii) and (iv) are correct

The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Description : The part of a derrick crane include (i) Mast (ii) Boom (iii) Bull wheel (iv) Jack Of these statements (A) (i), (ii) and (iv) are correct (B) (ii), (iii) and (iv) are correct (C) (i), (iii) and (iv) are correct (D) (i), (ii) and (iii) are correct

Last Answer : (D) (i), (ii) and (iii) are correct

Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on its yield stress, (iv) Factor of safety for concrete should be based on its ultimate stress. The correct statements are (A) (i) and (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Description : Examine the following statements: (i) Factor of safety for steel should be based on its yield stress, (ii) Factor of safety for steel should be based on its ultimate stress, (iii) Factor of safety for concrete should be based on ... (iii) (B) (i) and (iv) (C) (ii) and (iii) (D) (ii) and (iv

Last Answer : Answer: Option B

Choose the most suitable sentence to begin the body of the letter. (i) I wish to draw our attention to the increasing number of theft in our locality. (ii) I will draw your attention to the increasing number of thefts in our locality. (iii) I wish to draw your attention to the increasing number of thefts in our locality. (iv) I wish the thieves would draw our attention to the increasing number of thefts.

Description : Choose the most suitable sentence to begin the body of the letter. (i) I wish to draw our attention to the increasing number of theft in our locality. (ii) I will draw your attention to the ... in our locality. (iv) I wish the thieves would draw our attention to the increasing number of thefts.

Last Answer : (iii) I wish to draw your attention to the increasing number of thefts in our locality.

Suggest a suitable subject for this letter. (i) Thefts are on the increase. (ii) Increasing threat of theft in Shyam Nagar. (iii) necessity of appointing day and night guards by the RWA. (iv) to call a meeting of the area residents.

Description : Suggest a suitable subject for this letter. (i) Thefts are on the increase. (ii) Increasing threat of theft in Shyam Nagar. (iii) necessity of appointing day and night guards by the RWA. (iv) to call a meeting of the area residents.

Last Answer : Increasing threat of theft in Shyam Nagar Gurgaon

Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Description : Write the suitable cutter for carrying following operations on milling machine (i) Gear Tooth (ii) Parting off (iii) Keyway (iv) V-grooves (v) Rounding of corner (vi) Cutting of narrow slot and groove

Last Answer : (i) Gear Tooth : Form milling cutter, Cylindrical type or End mill type, Gear cutter. (ii) Parting off: Slitting Cutter (iii) Keyway : Staggered teeth side milling cutter, End mill cutter, key ... milling cutter. Selection of a cutter depends upon type and size of slot or groove to be produced. 

Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT configuration having current gain less than one. (iv) BJT configuration suitable for impedance matching. (v) BIT configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.

Description : Identify type of BJT configuration having following features : (i) BJT configuration having the least current gain. (ii) KIT configuration called as voltage follower. (iii) BJT ... configuration suitable for voltage amplification. (vi) BJT configuration having the least output impedance.  

Last Answer : (i) BJT configuration having the least current gain : Common Base Configuration  (ii) KIT configuration called as voltage follower: Common Collector Configuration  (iii) BJT ... Emitter Configuration  (vi) BJT configuration having the least output impedance: Common Collector Configuration

Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Description : Quick lime is (i) Slow in setting (ii) Rapid in slacking (iii) Good in strength The correct answer is (A) Only (i) (B) Only (ii) (C) Both (i) and (ii) (D) Both (ii) and (

Last Answer : Answer: Option C

Concrete contains (i)Siliceous aggregates, having higher coefficient of expansion (ii)Igneous aggregates, having intermediate coefficient of expansion (iii)Lime stones, having lowest coefficient of expansion [ A ] i and iii [ B ] ii and iii [ C ] i and ii [ D ] i, ii and iii

Description : Concrete contains (i)Siliceous aggregates, having higher coefficient of expansion (ii)Igneous aggregates, having intermediate coefficient of expansion (iii)Lime stones, having lowest coefficient of expansion [ A ] i and iii [ B ] ii and iii [ C ] i and ii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

Explain the working principle of the following dynamometers with suitable sketches, if necessary: (i) Hydraulic Dynamometer. (ii) Eddy Current Dynamometer.

Description : Explain the working principle of the following dynamometers with suitable sketches, if necessary: (i) Hydraulic Dynamometer. (ii) Eddy Current Dynamometer.

Last Answer : (i) Hydraulic Dynamometer: In principle, hydraulic dynamometer construction is similar to that of a fluid flywheel. Hydraulic dynamometer consists of an impeller or inner rotating member coupled to the output shaft ... Eddy current oppose the rotor motion thus loading the engine.

Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the figure represents. (ii)Identify Ain the figure and mention its function. (iii)Mention the fate of the inner cell mass after implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Description : Study the given figure below and answer the question that follow important-questions-for-class-12-biology-cbse-fertilisation-pregnancy-and-embryonic-development-t-33-3 (i)Name the stage of human embryo the ... implantation in the uterus. (iv)Where are the stem cells located in this embryo? -Biology

Last Answer : (i)The stage is blastocyst. (ii) A—Trophoblast. It helps in attachment to endometrium during implantation and provides nourishment to developing embryo. (iii) Inner cell mass acts as precursor to embryo ... into ectoderm and endoderm. (iv) Stem cells are located in inner cell mass of embryo.

Effects of Telemedicine results in i) Medical assistants at the remote sites ii) Small hospitals can have hardware costs reduced iii) Research study and scope for medical and cost effectiveness iv) All of these

Description : Effects of Telemedicine results in i) Medical assistants at the remote sites ii) Small hospitals can have hardware costs reduced iii) Research study and scope for medical and cost effectiveness iv) All of these

Last Answer : iv) All of these

ICT is used extensively in i) Wider access to learning and participation ii) Antisocial activities involving harassment of individuals iii) Flexibility to study where, when and how best suits individual needs and preferences iv) Both A & C

Description : ICT is used extensively in i) Wider access to learning and participation ii) Antisocial activities involving harassment of individuals iii) Flexibility to study where, when and how best suits individual needs and preferences iv) Both A & C

Last Answer : iv) Both A & C

Field study is related to (i) Real life situations (ii) Experimental situations (iii) Laboratory situations (iv) None of the above

Description : Field study is related to (i) Real life situations (ii) Experimental situations (iii) Laboratory situations (iv) None of the above

Last Answer : (i) Real life situations

Research design of a study should not include (i) Objectives (ii) Hypothesis (iii) Findings (iv) Blue print of Research

Description : Research design of a study should not include (i) Objectives (ii) Hypothesis (iii) Findings (iv) Blue print of Research

Last Answer : (iii) Findings

How did Anne feel when she was punished the third time by Mr Keesing? i) She was happy as she had to write three essays on the same topic. ii) She enjoyed making fun of Mr. Keesing in her own way. iii) She was worried as she had run out of original ideas for her essay. iv) She was thrilled at another opportunity to showcase her writing abilities.

Description : How did Anne feel when she was punished the third time by Mr Keesing? i) She was happy as she had to write three essays on the same topic. ii) She enjoyed making fun of Mr. Keesing ... of original ideas for her essay. iv) She was thrilled at another opportunity to showcase her writing abilities.

Last Answer : iii) She was worried as she had run out of original ideas for her essay.

Suggest the type of glass used for the following work: i) Making panel of partition wall ii) Cashier Cabin iii) Skylight iv) Door Shutter

Description : Suggest the type of glass used for the following work: i) Making panel of partition wall ii) Cashier Cabin iii) Skylight iv) Door Shutter

Last Answer : i) Making panel of partition wall: Block glass OR Sheet Glass OR chipped and ground glass OR soda lime glass ii) Cashier Cabin-Polished plate glass OR bullet proof glass OR soda lime glass OR laminated ... clear window glass or lead glass iv) Door Shutter: Soda lime glass OR tempered glass

Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Description : Select insulating materials for following parts : (i) Insulation between heating element and base plate of electric iron. (ii) Insulation used over copper or aluminium conductor used for making coils. (iii) Transformer bushings. (iv) Insulation between transmission line and pole.

Last Answer : Parts Insulating Materials  Insulation between heating element and base plate of electric iron. Mica Insulation used over copper or aluminium conductor used for making coils.  ... Transformer bushings Porcelain  Insulation between transmission line and pole. Porcelain

Hydraulic lime is not used in plastering because it may result in a) Blistering* b) Efflorescence c) Flaking d) Fluorescence

Description : Hydraulic lime is not used in plastering because it may result in a) Blistering* b) Efflorescence c) Flaking d) Fluorescence

Last Answer : a) Blistering*