Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate
Last Answer : Answer: Option A
Description : C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus
Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above
Last Answer : Answer: Option D
Description : The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content
Last Answer : [ A ] Water cement ratio
Description : For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement ... weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates
Description : Grading of sand causes great variation in (A) Workability of concrete (B) Strength of concrete (C) Durability of concrete (D) All the above
Last Answer : (D) All the above
Description : Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is ... to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members
Last Answer : (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete
Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test
Last Answer : Answer: Option C
Description : The workability of concrete is expressed by (a) Water-cement ratio (b) Slump value (c) Compaction factor (d) Both (a) and (b)
Last Answer : (d) Both (a) and (b)
Description : Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test
Last Answer : [ C ] Compaction factor test
Description : In order to obtain the best workability of concrete, the preferred shape of aggregate is (A) Rounded (B) Elongated (C) Angular (D) All of the above
Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate
Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above
Description : Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate
Last Answer : (B) Increase in fineness of cement
Description : The ratio of differenct ingredients (cement, sand and aggregate) in concrete mix of grade M20 is. (a) 1:1:2 (b) 1:1.5:2 (c) 1:2:4 (d) 1:3:6
Last Answer : (b) 1:1.5:2
Description : According to the rule of water cement ratio, the strength of concrete wholly depends upon. (a) The quality of cement. (b) The quality of cement mixed with aggregate. (c) The amount of water used in preparation of concrete mix. (d) All of the above
Last Answer : (c) The amount of water used in preparation of concrete mix.
Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix
Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above
Description : Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced
Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above
Description : Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)
Last Answer : [ A ] i
Description : The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep
Last Answer : [ C ] Bleeding
Description : The maximum amount of dust which may be permitted in aggregates is (A) 5% of the total aggregates for low workability with a coarse grading (B) 10% of the total aggregates for low workability with ... of the total aggregates for a mix having high workability with fine grading (D) All the above
Description : Inert material of a cement concrete mix, is (A) Water (B) Cement (C) Aggregate (D) None of these
Description : For the construction of cement concrete floor, the maximum permissible size of aggregate, is (A) 4 mm (B) 6 mm (C) 8 mm (D) 10 mm
Description : Strength of cement concrete primarily depends upon (A) Quality of water (B) Quantity of aggregate (C) Quantity of cement (D) Water-cement
Description : The deleterious materials present in the aggregate (a) Prevent normal hydration of cement (b) Reduce the strength and durability of concrete. (c) Modify the setting action and cause efloresecence. (d) All of the above
Last Answer : (d) All of the above
Description : The material used as an ingredient of concrete is usually (a) Cement (b) Aggregate (c) Water (d) All the above
Last Answer : (d) All the above
Description : Inert material of a cement concrete mix, is [ A ] Water [ B ] Aggregate [ C ] Cement [ D ] None of these
Last Answer : [ B ] Aggregate
Description : Modulus of elasticity of concrete is primarily influenced by [ A ] Elastic properties of aggregate [ B ] Curing of concrete [ C ] Age of concrete [ D ] Mix proportion and type of cement
Last Answer : [ A ] Elastic properties of aggregate
Description : The risk of segregation is more for (A) Wetter mix (B) Larger proportion of maximum size aggregate (C) Coarser grading (D) All the above
Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above
Description : According to IS: 4561978, the flexural strength of concrete is (A) Directly proportional to compressive strength (B) Inversely proportional to compressive strength (C) Directly proportional to square root of compressive strength (D) Inversely proportional to square root of compressive strength
Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these
Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength
Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching
Last Answer : (D) Batching
Description : The strength and quality of concrete, depend upon: (A) Grading of aggregates (B) Surface area of aggregates (C) Shape of aggregates (D) All the above
Description : The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.
Last Answer : (d) All of these.
Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching
Last Answer : [ D ] Batching
Description : The strength and quality of concrete depends upon (i)Grading of aggregates (ii)Shape of aggregates (iii)Surface area of aggregates (iv)Surface texture of aggregates [ A ] i, ii and iv [ B ] ii, iii and iv [ C ] i, iii and iv [ D ] i, ii, iii and iv
Last Answer : [ D ] i, ii, iii and iv
Description : For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above
Description : Air entrainment in the concrete increases (A) Workability (B) Strength (C) The effects of temperature variations (D) The unit weight
Last Answer : (A) Workability
Description : Wp and Wf are the weights of a cylinder containing partially compacted and fully compacted concrete. If the compaction factor (Wp/Wf ) is 0.95, the workability of concrete is (A) Extremely low (B) Very low (C) Low (D) High
Last Answer : Option D
Description : Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above
Description : If the slump of a concrete mix is 60 mm, its workability is (A) Very low (B) Low (C) Medium (D) High
Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above
Description : The entrained air in concrete (A) Increases workability (B) Decreases workability (C) Decreases resistance to weathering (D) Increases stress
Description : Workability of concrete is measured by (A) Vicat apparatus test (B) Slump test (C) Minimum void method (D) Talbot Richa
Last Answer : Answer: Option B
Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above
Description : Pick up the correct statement from the following: (A) Segregation is necessary for a workable concrete (B) Consistency does not affect the workability of concrete (C) If the concrete mix is dry, the slump is maximum (D) None of these