Increase in water content in a cement concrete (i) Increases workability (ii) Increases the strength [ A ] i [ B ] ii [ C ] both (i) and (ii) [ D ] neither (i) nor (ii)

Increase in water content in a cement concrete
(i) Increases workability
(ii) Increases the strength
[ A ] i
[ B ] ii
[ C ] both (i) and (ii)
[ D ] neither (i) nor (ii)
by

1 Answer

Answer :

[ A ] i
by

Related questions

Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the concrete (C) The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Description : Pick up the correct statement from the following: (A) An increase in water content must be accompanied by an increase in cement content (B) Angular and rough aggregates reduce the workability of the ... The slump of the concrete mix decreases due to an increase in temperature (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Description : Pick up the correct statement from the following: (A) Water enables chemical reaction to take place with cement (B) Water lubricates the mixture of gravel, sand and cement (C) Strength of concrete structure largely depends upon its workability (D) All the above

Last Answer : (D) All the above

C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Description : C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Last Answer : Answer: Option A

Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Description : Workability of concrete mix with low water cement ratio is determined by (A) Tensile strength test (B) Slump test (C) Compaction factor test (D) Flexural strength test

Last Answer : Answer: Option C

Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Description : Workability of concrete mix with low water cement ratio is determined by [ A ] Tensile strength test [ B ] Slump cone test [ C ] Compaction factor test [ D ] Flexural strength test

Last Answer : [ C ] Compaction factor test

The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content

Description : The workability of concrete is mostly influenced by its [ A ] Water cement ratio [ B ] Aggregate cement ratio [ C ] Cement content [ D ] Water content

Last Answer : [ A ] Water cement ratio

Slump test for concrete is carried out, to determine (A) Strength (B) Durability (C) Workability (D) Water content

Description : Slump test for concrete is carried out, to determine (A) Strength (B) Durability (C) Workability (D) Water content

Last Answer : Answer: Option C

Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Description : Addition of pozzolana to cement (A) Decreases workability (B) Increases strength (C) Increases heat of hydration (D) None of these

Last Answer : Answer: Option D

As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Description : As compared to ordinary Portland cement, use of pozzolana cement (A) Reduces workability (B) Increases bleeding (C) Increases shrinkage (D) Increases strength

Last Answer : Answer: Option C

The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Description : The basic purpose of a retarder in concrete is (A) To increase the initial setting time of cement paste in concrete (B) To decrease the initial setting time of cement paste in concrete (C) To render the concrete more water tight (D) To improve the workability of concrete mix

Last Answer : Answer: Option A

Air entrainment in the concrete increases (A) Workability (B) Strength (C) The effects of temperature variations (D) The unit weight

Description : Air entrainment in the concrete increases (A) Workability (B) Strength (C) The effects of temperature variations (D) The unit weight

Last Answer : (A) Workability

The use of air-entraining agents in concretes (a) Increases workability of concrete (b) Decreases bleeding (c) Decreases strength (d) All of these

Description : The use of air-entraining agents in concretes (a) Increases workability of concrete (b) Decreases bleeding (c) Decreases strength (d) All of these

Last Answer : (d) All of these

The entrained air in concrete [ A ] Increases the strength [ B ] Decreases the resistance to weathering [ C ] Increases the workability [ D ] Decreases the workability

Description : The entrained air in concrete [ A ] Increases the strength [ B ] Decreases the resistance to weathering [ C ] Increases the workability [ D ] Decreases the workability

Last Answer : [ C ] Increases the workability

The workability of concrete is expressed by (a) Water-cement ratio (b) Slump value (c) Compaction factor (d) Both (a) and (b)

Description : The workability of concrete is expressed by (a) Water-cement ratio (b) Slump value (c) Compaction factor (d) Both (a) and (b)

Last Answer : (d) Both (a) and (b)

Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Description : Strength of concrete increases with (A) Increase in water-cement ratio (B) Increase in fineness of cement (C) Decrease in curing time (D) Decrease in size of aggregate

Last Answer : (B) Increase in fineness of cement

The strength of cement concrete increases with (a) The increase of water cement ratio. (b) The decrease of water cement ratio. (c) The increase of cement ratio (d) None of these

Description : The strength of cement concrete increases with (a) The increase of water cement ratio. (b) The decrease of water cement ratio. (c) The increase of cement ratio (d) None of these

Last Answer : (a) The increase of water cement ratio.

Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Description : Pick up the correct statement from the following: (A) Higher workability indicates unexpected increase in the moisture content (B) Higher workability indicates deficiency of sand (C) If the concrete mix is dry, the slump is zero (D) All the above

Last Answer : Answer: Option D

Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Last Answer : Answer: Option A

The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep

Description : The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep

Last Answer : [ C ] Bleeding

Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced

Description : Higher workability of concrete is required if the structure is (A) Made with cement concrete (B) Thick and reinforced (C) Thin and heavily reinforced (D) Thick and heavily reinforced

Last Answer : Answer: Option D

Workability of concrete is directly proportional to (A) Aggregate cement ratio (B) Time of transit (C) Grading of the aggregate (D) All of above

Description : Workability of concrete is directly proportional to (A) Aggregate cement ratio (B) Time of transit (C) Grading of the aggregate (D) All of above

Last Answer : Answer: Option C

Increase in the moisture content in concrete (A) Reduces the strength (B) Increases the strength (C) Does not change the strength (D) All of the abo

Description : Increase in the moisture content in concrete (A) Reduces the strength (B) Increases the strength (C) Does not change the strength (D) All of the above

Last Answer : Answer: Option A

Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Description : Proper proportioning of concrete, ensures (A) Desired strength and workability (B) Desired durability (C) Water tightness of the structure (D) All the above

Last Answer : Option D

The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Description : The 'transition temperature' for ductile to brittle behaviour of steel increases with increase in the __________ content in steel. (A) Carbon (B) Manganese (C) Both 'a' nor 'b' (D) Neither 'a' nor 'b'

Last Answer : (A) Carbon

Grading of sand causes great variation in (A) Workability of concrete (B) Strength of concrete (C) Durability of concrete (D) All the above

Description : Grading of sand causes great variation in (A) Workability of concrete (B) Strength of concrete (C) Durability of concrete (D) All the above

Last Answer : (D) All the above

For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above

Description : For given water content, workability decreases if the concrete aggregates contain an excess of (A) Thin particles (B) Flat particles (C) Elongated particles (D) All the above

Last Answer : (D) All the above

Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Description : Workability of concrete for a given water content is good if the aggregates, are (A) Rounded aggregate (B) Irregular aggregate (C) Angular aggregate (D) Flaky aggregate

Last Answer : Answer: Option A

Workability of concrete for a given water content is good, if the aggregates are [ A ] Rounded [ B ] Irregular [ C ] Angular [ D ] Flaky

Description : Workability of concrete for a given water content is good, if the aggregates are [ A ] Rounded [ B ] Irregular [ C ] Angular [ D ] Flaky

Last Answer : [ A ] Rounded

Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases(D) None of these (C) Increased, strength of concrete is not affected

Description : Pick up the incorrect statement from the following. If water cement ratio is (A) Increased, strength of concrete increases (B) Decreased, strength of concrete increases (C) Increased, strength of concrete is not affected (D) None of these

Last Answer : Answer: Option C

An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Description : An excess of flaky particles in concrete aggregates (A) Decreases the workability (B) Increases the quantity of water and sand (C) More than 15% are not desirable (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination of the moisture content (C) The absorption and porosity of an aggregate influence the property of the concrete (D) All the above

Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above

Last Answer : Answer: Option D

Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Description : Pick up the correct statement from the following: (A) The concrete gains strength due to hydration of cement (B) The concrete does not set at freezing point (C) The strength of concrete increases with its age (D) All the above

Last Answer : Answer: Option D

Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a period of 24 months, the strength of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Description : Pick up the incorrect statement from the following: (A) With passage of time, the strength of cement increases (B) With passage of time, the strength of cement decreases (C) After a ... of cement reduces to 50% (D) The concrete made with storage deteriorated cement, gains strength with time

Last Answer : Answer: Option A

Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period of 24 months, the strength of cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Description : Select incorrect statement from the following [ A ] With passage of time, the strength of cement decreases [ B ] With passage of time, the strength of cement increases [ C ] After a period ... cement reduces to 50% [ D ] The concrete made with storage deteriorated cement; gains strength with time.

Last Answer : [ B ] With passage of time, the strength of cement increases

Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by a straight horizontal line on the grading curve (C) The omission of a certain size of aggregate in concrete increases the workability but also increases the liability to segregation (D) All the above

Description : Pick up the correct statement from the following: (A) Continuous grading is not necessary for obtaining a minimum of air voids (B) The omission of a certain size of aggregate is shown by ... in concrete increases the workability but also increases the liability to segregation (D) All the above

Last Answer : Answer: Option D

The entrained air in concrete (A) Increases workability (B) Decreases workability (C) Decreases resistance to weathering (D) Increases stress

Description : The entrained air in concrete (A) Increases workability (B) Decreases workability (C) Decreases resistance to weathering (D) Increases stress

Last Answer : Answer: Option A

The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above

Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above

Last Answer : (D) All the above

Workability of a concrete – mix is determined by (i)Slump cone test (ii)Compaction factor test (iii)Vee bee test [ A ] i [ B ] ii [ C ] i and ii [ D ] i, ii and iii

Description : Workability of a concrete – mix is determined by (i)Slump cone test (ii)Compaction factor test (iii)Vee bee test [ A ] i [ B ] ii [ C ] i and ii [ D ] i, ii and iii

Last Answer : [ D ] i, ii and iii

The main factors affecting the permeability of concrete are (i)Grade of concrete (ii)Minimum cement content (iii)Maximum water cement ratio [ A ] i [ B ] i and ii [ C ] ii and iii [ D ] i, ii and iii

Description : The main factors affecting the permeability of concrete are (i)Grade of concrete (ii)Minimum cement content (iii)Maximum water cement ratio [ A ] i [ B ] i and ii [ C ] ii and iii [ D ] i, ii and iii

Last Answer : [ C ] ii and iii

The main factors affecting the permeability of concrete are (i)Grade of concrete (ii)Minimum cement content (iii)Maximum water cement ratio [ A ] i [ B ] i and ii [ C ] ii and iii [ D ] i, ii and iii

Description : The main factors affecting the permeability of concrete are (i)Grade of concrete (ii)Minimum cement content (iii)Maximum water cement ratio [ A ] i [ B ] i and ii [ C ] ii and iii [ D ] i, ii and iii

Last Answer : [ C ] ii and iii

The function of gypsum addition during cement making is to (A) Increase the density of cement (B) Decrease the cement setting rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The function of gypsum addition during cement making is to (A) Increase the density of cement (B) Decrease the cement setting rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Decrease the cement setting rate

The foundations are placed below ground level, to increase (A) Strength (B) Workability (C) Stability of structure (D) All the above

Description : The foundations are placed below ground level, to increase (A) Strength (B) Workability (C) Stability of structure (D) All the above

Last Answer : Answer: Option C

Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Description : Lime concrete is generally used for (A) Wall foundations (B) Flooring at ground level (C) Both (A) and (B) (D) Neither (A) nor (b)

Last Answer : Answer: Option B

The entrained concrete is used in lining walls and roofs for making (A) Heat insulated (B) Sound insulated (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : The entrained concrete is used in lining walls and roofs for making (A) Heat insulated (B) Sound insulated (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Description : After storage, the strength of cement (A) Decreases (B) Increases (C) Remains same (D) May increase or decrease

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Description : When a cohesionless soil attains quick condition, it looses (A) Shear strength (B) Bearing capacity (C) Both (a) and (b) (D) Neither (a) nor (6

Last Answer : Answer: Option C

Factor of safety against sliding of a slope, is the ratio of (A) Actual cohesion to that required to maintain stability of slope (B) Shear strength to shear stress along the surface (C) Neither (a) nor (b) (D) Both (a) and (b)

Description : Factor of safety against sliding of a slope, is the ratio of (A) Actual cohesion to that required to maintain stability of slope (B) Shear strength to shear stress along the surface (C) Neither (a) nor (b) (D) Both (a) and (b)

Last Answer : Answer: Option D

With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : With increase in the oxygen content of the coal, its __________ decreases. (A) Calorific value (B) Caking power (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement and aggregates (C) Least weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Description : For given workability the grading requiring the least amount of water is one that gives (A) Greatest surface area for the given cement and aggregates (B) Least surface area for the given cement ... weight for the given cement and aggregates (D) Greatest weight for the given cement and aggregates

Last Answer : Answer: Option A