Which one of the following statements is not correct with respect to PSC beams? (a) Loss due to shrinkage is proportional to water-cement ratio used in concrete (b) Loss due to creep is proportional to the age of the member at the time of loading. (c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete (d) Loss due to friction occurs in post tensioned concrete members

Which one of the following statements is not correct with respect to PSC beams?
(a) Loss due to shrinkage is proportional to water-cement ratio used in concrete
(b) Loss due to creep is proportional to the age of the member at the time of loading.
(c) Loss due to elastic deformation is directly proportionally to the modulus of
elasticity of concrete
(d) Loss due to friction occurs in post tensioned concrete members
by

1 Answer

Answer :

(c) Loss due to elastic deformation is directly proportionally to the modulus of elasticity of concrete
by

Related questions

Pre-stress loss due to friction occurs (A) Only in post-tensioned beams (B) Only in pre-tensioned beams (C) In both post-tensioned and pre-tensioned beams (D) None of the above

Description : Pre-stress loss due to friction occurs (A) Only in post-tensioned beams (B) Only in pre-tensioned beams (C) In both post-tensioned and pre-tensioned beams (D) None of the above

Last Answer : Answer: Option A

Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to frictio

Description : Which of the following losses of pre-stress occurs only in pre-tensioning and not in posttensioning? (A) Elastic shortening of concrete (B) Shrinkage of concrete (C) Creep of concrete (D) Loss due to friction

Last Answer : Answer: Option A

After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Description : After pre-stressing process is completed, a loss of stress is due to (A) Shrinkage of concrete (B) Elastic shortening of concrete (C) Creep of concrete (D) All the above

Last Answer : Answer: Option D

Modulus of elasticity of concrete is primarily influenced by [ A ] Elastic properties of aggregate [ B ] Curing of concrete [ C ] Age of concrete [ D ] Mix proportion and type of cement

Description : Modulus of elasticity of concrete is primarily influenced by [ A ] Elastic properties of aggregate [ B ] Curing of concrete [ C ] Age of concrete [ D ] Mix proportion and type of cement

Last Answer : [ A ] Elastic properties of aggregate

A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Description : A pre-stressed concrete member is preferred because (A) Its dimensions are not decided from the diagonal tensile stress (B) Large size of long beams carrying large shear force need not be adopted (C) Removal of cracks in the members due to shrinkage (D) All the above

Last Answer : Answer: Option D

If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is: (A) (1 - C)mf - eEB) (C - 1)mf + eE(C) (C - 1)mf - eE(D) (1 - C)mf + eE

Description : If C is creep coefficient, f is original pre-stress in concrete, m is modular ratio, E is Young's modulus of steel and e is shrinkage strain, the combined effect of creep and shrinkage is: (A) (1 - C)mf - eE B) (C - 1)mf + eE (C) (C - 1)mf - eE (D) (1 - C)mf + eE

Last Answer : Answer: Option B

The ‘transmission length’ requirement is to be satisfied in the design of (a) Pre-tensioned concrete beams (b) Post-tensioned concrete beam (c) Unbonded post-tensioned concrete (d) Post-tensioned continuous concrete beams

Description : The ‘transmission length’ requirement is to be satisfied in the design of (a) Pre-tensioned concrete beams (b) Post-tensioned concrete beam (c) Unbonded post-tensioned concrete (d) Post-tensioned continuous concrete beams

Last Answer : (a) Pre-tensioned concrete beams

The lower water cement ratio in concrete, introduces (A) Smaller creep and shrinkage (B) Greater density and smaller permeability (C) Improved frost resistance (D) All the above

Description : The lower water cement ratio in concrete, introduces (A) Smaller creep and shrinkage (B) Greater density and smaller permeability (C) Improved frost resistance (D) All the above

Last Answer : Answer: Option D

The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above

Description : The shrinkage of concrete (A) Is proportional to water content is the mix (B) Is proportional to cement concrete (C) Increases with age of concrete (D) All the above

Last Answer : (D) All the above

Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's law is equally applicable to concrete as well as to steel (C) Variation of stress in reinforcement due to changes in external loading is negligible (D) All the above

Description : Pick up the assumption for the design of a pre-stressed concrete member from the following: (A) A transverse plane section remains a plane after bending (B) During deformation limits, Hook's ... of stress in reinforcement due to changes in external loading is negligible (D) All the above

Last Answer : Answer: Option D

Modulus of elasticity of concrete is increased with (a) Higher W/C ratio (b) Shorter curing period (c) Lesser vibration (d) Increase in age

Description : Modulus of elasticity of concrete is increased with (a) Higher W/C ratio (b) Shorter curing period (c) Lesser vibration (d) Increase in age

Last Answer : (d) Increase in age

Shrinkage of concrete is mostly influenced by [ A ] Environmental conditions [ B ] Size of member [ C ] Cement in concrete [ D ] The total amount of water present in concrete

Description : Shrinkage of concrete is mostly influenced by [ A ] Environmental conditions [ B ] Size of member [ C ] Cement in concrete [ D ] The total amount of water present in concrete

Last Answer : [ D ] The total amount of water present in concrete

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity of steel (4) Geometry of the section. Which of these statements are correct? (a) 2, 3 and 4 (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Description : Consider the following statements: Percentage of steel for balanced designed of a singly reinforced rectangular section by limit state method depends on (1) Characteristic strength of concrete (2) Yield strength of concrete (3) Modulus of elasticity ... (b) 1, 3 and 4 (c) 1, 2 and 4 (d) 1, 2 and 3

Last Answer : 1,2,4

Which of the following statements refer to correct purpose as regards testing of concrete by ultrasonic pulse velocity method? 1. To assess the quality of concrete in-situ. 2. To determine the dynamic modulus of elasticity of concrete. 3. To locate the presence of cracks in it (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d)1, 2 and 3

Description : Which of the following statements refer to correct purpose as regards testing of concrete by ultrasonic pulse velocity method? 1. To assess the quality of concrete in-situ. 2. To determine the dynamic modulus of elasticity of concrete. 3 ... and 2 only (b) 1 and 3 only (c) 2 and 3 only (d)1, 2 and 3

Last Answer : (d)1, 2 and 3

The ratio of shear stress and shear strain of an elastic material, is (A) Modulus of Rigidity (B) Shear Modulus (C) Modulus of Elasticity (D) Both (a) and (b)

Description : The ratio of shear stress and shear strain of an elastic material, is  (A) Modulus of Rigidity  (B) Shear Modulus  (C) Modulus of Elasticity  (D) Both (a) and (b) 

Last Answer : (D) Both (a) and (b) 

Workability of concrete is directly proportional to (A) Aggregate cement ratio (B) Time of transit (C) Grading of the aggregate (D) All of above

Description : Workability of concrete is directly proportional to (A) Aggregate cement ratio (B) Time of transit (C) Grading of the aggregate (D) All of above

Last Answer : Answer: Option C

The process of hardening of concrete in the presence of water is called [ A ] Creep [ B ] Hydration [ C ] Shrinkage [ D ] Curing

Description : The process of hardening of concrete in the presence of water is called [ A ] Creep [ B ] Hydration [ C ] Shrinkage [ D ] Curing

Last Answer : [ B ] Hydration

As per IS : 1343, total shrinkage for a pre-tensioned beam, is (A) 3.0 × 10-2 (B) 3.0 × 10-3 (C) 3.0 × 10-5 (D) 3.5 × 10

Description : As per IS : 1343, total shrinkage for a pre-tensioned beam, is (A) 3.0 × 10-2 (B) 3.0 × 10-3 (C) 3.0 × 10-5 (D) 3.5 × 10

Last Answer : Answer: Option D

Slump cone test is used to determine [ A ] Shrinkage of concrete mix [ B ] Creep of concrete [ C ] Workability of concrete mix [ D ] Soundness of concrete

Description : Slump cone test is used to determine [ A ] Shrinkage of concrete mix [ B ] Creep of concrete [ C ] Workability of concrete mix [ D ] Soundness of concrete

Last Answer : [ C ] Workability of concrete mix

The process of keeping the concrete structure moist is called [ A ] Hydration [ B ] Curing [ C ] Creep [ D ] Shrinkage

Description : The process of keeping the concrete structure moist is called [ A ] Hydration [ B ] Curing [ C ] Creep [ D ] Shrinkage

Last Answer : [ B ] Curing

Cube strength of controlled concrete to be used for pre-tensioned and post-tensioned work respectively should not be less than (A) 35 MPa and 42 MPa (B) 42 MPa and 35 MPa (C) 42 MPa and 53 MPa (D) 53 MPa and 42 MPa

Description : Cube strength of controlled concrete to be used for pre-tensioned and post-tensioned work respectively should not be less than (A) 35 MPa and 42 MPa (B) 42 MPa and 35 MPa (C) 42 MPa and 53 MPa (D) 53 MPa and 42 MPa

Last Answer : Answer: Option B

Deformation that occurs due to stress over a period of time is known as ____________ a) Wear resistance b) Fatigue c) Creep d) Fracture

Description : Deformation that occurs due to stress over a period of time is known as ____________ a) Wear resistance b) Fatigue c) Creep d) Fracture

Last Answer : c) Creep

Shrinkage in concrete can be reduced by using (A) Low water cement ratio (B) Less cement in the concrete (C) Proper concrete mix (D) All the above

Description : Shrinkage in concrete can be reduced by using (A) Low water cement ratio (B) Less cement in the concrete (C) Proper concrete mix (D) All the above

Last Answer : Answer: Option D

Shrinkage in concrete can be reduced by using (i) Low water cement ratio (ii) More amount of cement in the concrete (iii) Presaturated aggregates [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Description : Shrinkage in concrete can be reduced by using (i) Low water cement ratio (ii) More amount of cement in the concrete (iii) Presaturated aggregates [ A ] i [ B ] i and ii [ C ] i and iii [ D ] i, ii and iii

Last Answer : [ C ] i and iii

The loss due to relaxation of stress in steel in PSC member depends on 1. Applied stress level 2. Temperature 3. Type of steel (a) 1 and 2 only (b) 2 and 3 only ( c) 1, 2 and 3 (d) 1 and 3 only

Description : The loss due to relaxation of stress in steel in PSC member depends on 1. Applied stress level 2. Temperature 3. Type of steel (a) 1 and 2 only (b) 2 and 3 only ( c) 1, 2 and 3 (d) 1 and 3 only

Last Answer : ( c) 1, 2 and 3

Factor of safety for fatigue loading is the ratio of (a) elastic limit to the working stress (b) Young's modulus to the ultimate tensile strength (c) endurance limit to the working stress (d) elastic limit to the yield point

Description : Factor of safety for fatigue loading is the ratio of (a) elastic limit to the working stress (b) Young's modulus to the ultimate tensile strength (c) endurance limit to the working stress (d) elastic limit to the yield point

Last Answer : (c) endurance limit to the working stress

The ability of a material to resist plastic deformation known as _____________ a) Tensile strength b) Yield strength c) Modulus of elasticity d) Impact strength

Description : The ability of a material to resist plastic deformation known as _____________ a) Tensile strength b) Yield strength c) Modulus of elasticity d) Impact strength

Last Answer : b) Yield strength

Modulus of elasticity is defined as: A. The stress at the proportional limit B. The stress-strain ratio within the proportional limit

Description : Modulus of elasticity is defined as: A. The stress at the proportional limit B. The stress-strain ratio within the proportional limit

Last Answer : B. The stress-strain ratio within the proportional limit

C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Description : C.R.R.I. charts are used to obtain a relationship between strength of concrete and (A) Water cement ratio (B) Workability (C) Grading of aggregate (D) Fineness modulus

Last Answer : Answer: Option A

The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Description : The factors which effects the design of concrete mix is (a) Fineness modulus (b) Water cement ratio (c) Slump (d) All of these

Last Answer : (d) All of these

The strain energy due to volumetric strain (A) Is directly proportional to the volume (B) Is directly proportional to the square of exerted pressure (C) Is inversely proportional to Bulk modulus (D) All the above

Description : The strain energy due to volumetric strain  (A) Is directly proportional to the volume  (B) Is directly proportional to the square of exerted pressure  (C) Is inversely proportional to Bulk modulus  (D) All the above 

Last Answer : (D) All the above 

In a singly reinforced beam (A) Compression is borne entirely by concrete (B) Steel possesses initial stresses when embedded in concrete (C) Plane sections transverse to the centre line of the beam before bending remain plane after bending (D) Elastic moduli for concrete and steel have different values within the limits of deformation of the beam

Description : In a singly reinforced beam (A) Compression is borne entirely by concrete (B) Steel possesses initial stresses when embedded in concrete (C) Plane sections transverse to the centre line ... Elastic moduli for concrete and steel have different values within the limits of deformation of the beam

Last Answer : Answer: Option C

A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Description : A member which does not regain its original shape after removed of load producing deformation is said (A) Plastic (B) Elastic (C) Rigid (D) None of these

Last Answer : (A) Plastic

The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken up by reinforcement alone and none by the concrete. (c) Steel reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Description : The application of elastic theory to the beams is based on the assumption that (a) At any cross-section, plane sections before bending remain plane after bending (b) All tensile stresses are taken ... reinforcement is free from initial stresses when it is embedded in concrete. (d) All of the above

Last Answer : (d) All of the above

The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep

Description : The separation of water or water cement mixture from the freshly laid concrete is known as [ A ] Workability [ B ] Segregation [ C ] Bleeding [ D ] Creep

Last Answer : [ C ] Bleeding

Skin becomes wrinkled in the old age due to (a) loss of elastic tissue in the dermis (b) considerable slag in the rate of dividing cells in the stratum germinativum (c) gradual loss of elasticity in the subcutaneous layer (d) all of these

Description : Skin becomes wrinkled in the old age due to (a) loss of elastic tissue in the dermis (b) considerable slag in the rate of dividing cells in the stratum germinativum (c) gradual loss of elasticity in the subcutaneous layer (d) all of these

Last Answer : Ans:(b)

As per IS: 456-2000, modulus of elasticity of concrete (in N/mm2) is given by [ A ] 5700 vfCK [ B ] 5000 vfCK [ C ] 3700 vfCK [ D ] 3000 vfCK

Description : As per IS: 456-2000, modulus of elasticity of concrete (in N/mm2) is given by [ A ] 5700 vfCK [ B ] 5000 vfCK [ C ] 3700 vfCK [ D ] 3000 vfCK

Last Answer : [ B ] 5000 vfCK

Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C) Curing of concrete is done for proper compaction of cement (D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Description : Pick up the correct statement from the following: (A) Plain cement concrete is equally strong in compression as well as in tension (B) Slump test is performed to check concrete strength (C ... D) Fineness modulus is the index number expressing the relative sizes of both coarse and fine aggregates

Last Answer : Option D

Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Description : Workability of concrete is inversely proportional to (A) Time of transit (B) water-cement ratio (C) The air in the mix (D) Size of aggregate

Last Answer : Answer: Option A

Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Description : Hooke's law (A) Applies to elastic deformation (B) Applies beyond limit of proportionality in stress-strain curve (C) States that stress is inversely proportional to strain upto elastic limit (D) None of these

Last Answer : (A) Applies to elastic deformation

Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements are correct? (a) 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Description : Consider the following statements: Cement mortars richer than 1 : 3 are not used in masonry work because 1. There is no gain in strength of masonry 2. There is high shrinkage 3. They are prone to segregation Which of these statements ... 1, 2 and 3 (b) 1 and 2 only (c) 2 and 3 only (d) 1 and 3 only

Last Answer : (b) 1 and 2 only

The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Description : The ductility of metal is usually expressed in terms of the: A. Yield strength (point where the material is not longer elastic) B. Percent elongation C. Modulus of elasticity (stiffness of the material)

Last Answer : B. Percent elongation

A Gold clasp is more elastic than Cobalt Chrome, but Co-Chrome has high modulus of elasticity. A. The first statement is false the second is true B. Both are true C. The first is true the second is false D. Both are false

Description : A Gold clasp is more elastic than Cobalt Chrome, but Co-Chrome has high modulus of elasticity. A. The first statement is false the second is true B. Both are true C. The first is true the second is false D. Both are false

Last Answer : B. Both are true

Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Description : Creep coefficient is the ratio of [ A ] Ultimate Creep strain to elastic strain [ B ] Elastic strain to ultimate Creep strain [ C ] Elastic strain to plastic strain [ D ] Plastic strain to elastic strain

Last Answer : [ A ] Ultimate Creep strain to elastic strain

In a shaft, the shear stress is not directly proportional to (A) Radius of the shaft (B) Angle of twist (C) Length of the shaft (D) Modulus of rigidity

Description : In a shaft, the shear stress is not directly proportional to  (A) Radius of the shaft  (B) Angle of twist  (C) Length of the shaft  (D) Modulus of rigidity

Last Answer : (C) Length of the shaft

Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly proportional to (A) Modulus of rigidity (B) Angle of twist (C) Reciprocal of the length of the shaft (D) Moment of inertia of the shaft section

Description : Pick up the incorrect statement from the following: The torsional resistance of a shaft is directly  proportional to  (A) Modulus of rigidity  (B) Angle of twist  (C) Reciprocal of the length of the shaft  (D) Moment of inertia of the shaft section 

Last Answer : (D) Moment of inertia of the shaft section 

Minimum steel required in slabs is mainly controlled by the following consideration [ A ] Cracking on the tension side [ B ] Shrinkage and creep [ C ] Both (a) and (b) [ D ] None of the above.

Description : Minimum steel required in slabs is mainly controlled by the following consideration [ A ] Cracking on the tension side [ B ] Shrinkage and creep [ C ] Both (a) and (b) [ D ] None of the above.

Last Answer : [ B ] Shrinkage and creep