How Mechanical Draft Cooling Towers Are Classified?

How Mechanical Draft Cooling Towers Are Classified?
by

1 Answer

Answer :

Mechanical draft cooling tower is classified into three types:
1. Forced draft tower.
2. Induced draft counterflow tower.
3. Induced draft cross flow tower.
by

Related questions

What Are The Advantages Of Hyperbolic Natural-draft Cooling Towers?

Description : What Are The Advantages Of Hyperbolic Natural-draft Cooling Towers?

Last Answer :  Since no fans are used power cost and auxiliary equipments cost is reduced.  Hyperbolic tower chimney creates its own draft even when there is no wind.  Ground fogging and warm air re-circulation are avoided in hyperbolic towers.  The structure is more or less self-supported.

Define Forced Draft And Induced Draft Cooling Towers?

Description : Define Forced Draft And Induced Draft Cooling Towers?

Last Answer : If the fan is located at the bottom of the tower and air is blown by the fan up through the descending water it is called as forced draft cooling towers. If the fan is located at the top of the ... on the tower's side and drawn up and discharge through the fan casing, it is called as induced draft.

How The Dry Type Cooling Towers Are Classified?

Description : How The Dry Type Cooling Towers Are Classified?

Last Answer : The dry type cooling towers are classified into two types ‘as follows: 1. Indirect dry type (or) Heller cooling system 2. Direct dry type-cooling system

How The Atmospheric (or) Natural Draught Cooling Towers Are Classified?

Description : How The Atmospheric (or) Natural Draught Cooling Towers Are Classified?

Last Answer : In atmospheric (or) natural cooling towers, the natural air provides the required cooling without the use of fans. This is classified into three types: 1. Natural draft spray filled towers. 2. Natural draft packed type towers. 3. Hyperbolic cooling towers.

Name Different Types Of Cooling Towers?

Description : Name Different Types Of Cooling Towers?

Last Answer : The cooling towers are classified as follows. According to the construction of material: 1. Timber for small tower 2. Ferro concrete for large capacity stations. 3. Multi deck concrete towers for ... air draught: 1. Atmospheric (or) Natural draught cooling system 2. Mechanical draught cooling tower.

What Is The Working Principle Of Cooling Towers?

Description : What Is The Working Principle Of Cooling Towers?

Last Answer : The hot water is sprayed from the top of the tower, while the air is made to flow from the bottom of the tower to the top. This air cools the hot water in the cooling tower. Air evaporates ... and leaves at the top of the tower and cooled water leaves at the bottom and recirculated to the condenser.

What Are The Factors That Affect The Rate Of Evaporation Of Water In Cooling Towers?

Description : What Are The Factors That Affect The Rate Of Evaporation Of Water In Cooling Towers?

Last Answer :  Amount of water surface area exposed.  The time of exposure.  The relative velocity of air passing over the droplets.  The RH of air.  The direction of airflow relative to water.

What Are The Advantages Of Induced Draft Cooling Tower Over Forced Draft Cooling Tower?

Description : What Are The Advantages Of Induced Draft Cooling Tower Over Forced Draft Cooling Tower?

Last Answer : 1. The outlet water comes in contact with the driest air and warmest water comes in contact with most humid air. 2. The re-circulation is seldom a problem. 3. The first cost is low due to the reduction in pump power consumption.

Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of forced draft cooling tower is reduced by the recirculation of the humid and hot discharged air (C) A natural draft cooling tower is recommended to be used, when the air humidity is low and air temperature is also low (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Description : Pick out the wrong statement pertaining to the cooling towers. (A) In case of induced draft cooling tower, the fan is placed at the top of the tower (B) Effectiveness of ... Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

Last Answer : (D) Effectiveness of a mechanical draft cooling tower is reduced with increase in air wet-bulb temperature

What Is The Use Of Draft Tube?

Description : What Is The Use Of Draft Tube?

Last Answer : The draft tube is used to regain the kinetic energy of water coming out of reaction turbine. It enables the reaction turbine to be placed over tailrace level.

What Is The Function Of Cooling System In Diesel Power Plant?

Description : What Is The Function Of Cooling System In Diesel Power Plant?

Last Answer : The function of cooling system is to remove heat from the engine cylinder to keep the temperature of the cylinder in low range and extend engine life.

How The Ash Handling System Is Classified?

Description : How The Ash Handling System Is Classified?

Last Answer : 1. Mechanical handling system 2. Hydraulic system 3. Pneumatic system 4. Steam jet system

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

. Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Description : . Improved cooling efficiency and minimum usage of material are the key features of ______ a. Natural draft cooling towers b. Cross flow towers c. Hyperbolic cooling d. All of above

Last Answer : Hyperbolic cooling

. _____ type of cooling towers are used with nuclear power plants. a. Cross flow b. Natural draft c. Hyperbolic d. None of above

Description : . _____ type of cooling towers are used with nuclear power plants. a. Cross flow b. Natural draft c. Hyperbolic d. None of above

Last Answer : Hyperbolic

Hyperbolic cooling towers are also referred as a. Natural draft towers b. Cross flow towers c. Hyperboloid towers d. None of the above

Description : Hyperbolic cooling towers are also referred as a. Natural draft towers b. Cross flow towers c. Hyperboloid towers d. None of the above

Last Answer : Hyperboloid towers

Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Description : Hyperbolic cooling towers have become design standard for all natural draft structural towers because usage of . a. Their structural strength b. Minimum usage of material. c. Improving cooling efficiency d. All of the above.

Last Answer : All of the above.

Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Description : Natural draft cooling towers are mainly used in the _____. • Steel industry • Fertilizer industry • Alumina industry • Power stations

Last Answer : Power stations

__________ Cooling towers have become the design standard for all natural-draft cooling towers because oftheir structural strength and minimum usage of material. • HCT • CCT • Hyperboloid • None

Description : __________ Cooling towers have become the design standard for all natural-draft cooling towers because oftheir structural strength and minimum usage of material. • HCT • CCT • Hyperboloid • None

Last Answer : Hyperboloid

Natural draft in hyperbolic cooling towers reduces of fans a) Damage b) Efficiency c) Cost d) Speed

Description : Natural draft in hyperbolic cooling towers reduces of fans a) Damage b) Efficiency c) Cost d) Speed

Last Answer : c) Cost

Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Description : Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Last Answer : Differentiate induced draft and forced draft cooling towers based on (i) Location of fan (ii) Corrosion of blades (iii) Efficiency (iv) Fan size

Describe with neat sketch working of natural draft cooling towers.

Description : Describe with neat sketch working of natural draft cooling towers.

Last Answer : Natural draft cooling tower: -In natural draught cooling tower, the circulation of air is produced by the pressure difference of air inside the tower and outside atmospheric air Hot cooling water falls down ... the pressure difference of air inside and outside of cooling tower (natural flow).

Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Description : Which of the following employs an accessory known as 'drift eliminator'? (A) Multiple effect evaporator (B) Mechanical draft cooling tower (C) Rotary dryer (D) Rotating disc contacto

Last Answer : (B) Mechanical draft cooling tower

Design of hyperbolic cooling tower standard for all cooling tower a) Mechanical draft b) Natural draft c) Both a & b d) Neither a & b

Description : Design of hyperbolic cooling tower standard for all cooling tower a) Mechanical draft b) Natural draft c) Both a & b d) Neither a & b

Last Answer : b) Natural draft

Name The Coolants Commonly Used For Fast Breeder Reactors?

Description : Name The Coolants Commonly Used For Fast Breeder Reactors?

Last Answer :  Liquid metal (Na (or) Na K)  Helium (He)  Carbon dioxide.

What Is Breeding In Nuclear Reactor?

Description : What Is Breeding In Nuclear Reactor?

Last Answer : The process of producing fissionable material from a fertile material such as uranium 238 (U 238) and thorium 232 (Th 232) by neutron absorption is known as breeding.

What Are The Advantages Of Gas Cooled Reactor Nuclear Power Plant?

Description : What Are The Advantages Of Gas Cooled Reactor Nuclear Power Plant?

Last Answer : 1. Fuel processing is simple. 2. The use of C02 as coolant completely eliminates the possibility of explosion in reactor. 3. No corrosion problem.

State Some Advantages Of Pressurized Water Reactor?

Description : State Some Advantages Of Pressurized Water Reactor?

Last Answer :  The pressurized water reactor is compact  In this type, water is used as coolant; moderator and reflector water is cheap and available in plenty)  It requires less number of control rods.

Name The Different Components Of Nuclear Reactor?

Description : Name The Different Components Of Nuclear Reactor?

Last Answer : 1. Nuclear fuel 2. Moderator 3. Control rods 4. Reflectors 5. Reactor vessel 6. Biological shielding 7. Coolant

What Is Meant By Nuclear Fission?

Description : What Is Meant By Nuclear Fission?

Last Answer : Uranium exists in different isotopes of U 238, tP34 and U 235. Out of these, EP35 is most unstable. When unstable heavy nucleus is bombarded with high-energy neutrons, it splits up roughly ... neutrons are released and a large amount of energy is produced. This process is called nuclear fission.

What Are The Different Types Of Load Acting On The Chimney?

Description : What Are The Different Types Of Load Acting On The Chimney?

Last Answer : Its own weight which is considered to act on single vertical force acting through the centroid The wind pressure, which is considered to act on the horizontal force acting on the centroid of vertical projected area.

What Is The Purpose Of Control Rods?

Description : What Is The Purpose Of Control Rods?

Last Answer : The control rods are used to start the chain reaction, maintain the chain reaction at required level and to shut down the reactor during emergency.

What Is The Working Principle Of Magneto Hydrodynamic Power Plant?

Description : What Is The Working Principle Of Magneto Hydrodynamic Power Plant?

Last Answer : The working principle of MHD is as like that of dynamo. Instead of solid conductor high temperature plasma is passed through the magnetic field at sonic speed. When the gas is passed through magnetic field, current is induced. Electrodes collect this induced current.

Name The Different Types Of Mhd Generators?

Description : Name The Different Types Of Mhd Generators?

Last Answer :  Open cycle MHD  Closed cycle MHD  Closed cycle MHD with liquid metal

What Are The Advantages Of Sodium In Fast-breeder Reactors?

Description : What Are The Advantages Of Sodium In Fast-breeder Reactors?

Last Answer :  Sodium has very low absorption cross-sectional area.  It possess good heat transfer properties at high temperature and low pressure.  It does not react with any of the structural materials used in primary circuits.

What Are The Demerits Of Breeder Reactor?

Description : What Are The Demerits Of Breeder Reactor?

Last Answer :  Highly enriched fuel is required  Control is difficult and expensive  Safety must be provided against melt down  Handling of sodium is a major problem

What Are The Advantages Of Breeder Reactors?

Description : What Are The Advantages Of Breeder Reactors?

Last Answer :  It gives high power density than any other reactor.  High breeding is possible.  High burn-up of fuel is achievable.  The operation of the reactor is not limited by Xe poisoning.

What Are The Advantages Using Co2 As Coolant?

Description : What Are The Advantages Using Co2 As Coolant?

Last Answer :  Gases do not react chemically with the structural materials.  Gas can attain any temperature for a particular pressure.  They do not absorb neutron.  The leakage of gas will not affect the reactivity.  The gas coolant provides best neutron economy.

Name Few Types Of Reactors?

Description : Name Few Types Of Reactors?

Last Answer : Fast reactors, Thermal reactors, natural fuel reactors, Enriched Uranium reactors, water moderated reactors, heavy water moderated reactor, graphite moderated reactor, gas cooled reactors and Sodium cooled reactors.

What Are The Desirable Properties Of A Coolant?

Description : What Are The Desirable Properties Of A Coolant?

Last Answer :  It should not absorb neutron  Have high chemical and radiation stability  Non-corrosive  Have high boiling point  Non-toxic

What Are The Desirable Properties Of A Good Moderator?

Description : What Are The Desirable Properties Of A Good Moderator?

Last Answer :  It must be as light as possible It must slow down the neutron as quick as possible.  It must have resistance to corrosion.  It must have good machinability.  It must have good conductivity and high melting point.

Define Fertile Materials And Breeding In Reactors?

Description : Define Fertile Materials And Breeding In Reactors?

Last Answer : There are materials like U 235 and Th232 which are not fissile but can be converted into fissile materials by the bombardment of neutrons. Such materials are known as fertile materials. The process of converting more fertile material into fissile material in a reaction is known as breeding.

Define Multiplication Factor Of A Fission Process?

Description : Define Multiplication Factor Of A Fission Process?

Last Answer : k =number of neutrons of any one generation/number of neutrons of immediately preceding generation.

What Are The Requirements To Sustain Fission Process?

Description : What Are The Requirements To Sustain Fission Process?

Last Answer :  The bombarded neutrons must have sufficient energy to cause fission.  The number of neutrons produced must be able to create the rate of fission.  The fission process must generate energy.  The fission process must be controlled.

Write About Isotopes Of An Element?

Description : Write About Isotopes Of An Element?

Last Answer : Some elements have the same number of protons in the nucleus but different number of neutrons. As a result, these elements have the same atomic number but different mass number. Such type of elements ... mass numbers due to different number of neutrons, are known as in the isotopes of an element.

Write About Atomic Number?

Description : Write About Atomic Number?

Last Answer : The nucleus contains protons and neutrons. The number of protons in a given atom is an atomic number (Z). The atomic number for H is 1 and He is 2.

What Is The Need Of Depreciation Cost?

Description : What Is The Need Of Depreciation Cost?

Last Answer : Depreciation cost is the amount to be set aside per year from the income of the plant to meet the depreciation caused by the age of service, wear and tear of the machinery and equipments. Depreciation amount collected every year helps in replacing and repairing the equipment.

What Includes Operating Cost?

Description : What Includes Operating Cost?

Last Answer : Operating cost includes the following cost.  Cost of fuel  Cost of operating labour,  Cost of maintenance labours and materials.  Cost of supplier like Water for feeding boilers, for condenser and for general use.  Lubrication oil and, grease.  Water treatment chemicals.

What Includes Fixed Cost?

Description : What Includes Fixed Cost?

Last Answer : Fixed cost includes the following cost. 1. Cost of land 2. Cost of building 3. Cost of equipment 4. Cost of installation 5. Interest 6. Depreciation cost 7. Insurance 8. Management cost

Define Load Factor?

Description : Define Load Factor?

Last Answer : Load factor is defined as the ratio of average load to the peak load (or) maximum demand.