How the light signal is transmitted through the fiber?

How the light signal is transmitted through the fiber?
by

1 Answer

Answer :

Ans. There are three major parts:
1. Transmitter: it converts electrical signal into light signals
2. Optical fiber: it carries the signal from one place to another
3. Receiver: it converts light signal into electrical signal
Pulse of light represented by “1” and absence of light is represented by “0”. Any information can be represented by the pattern of 1’s and 0’s.
by

Related questions

Why would it be advantages to use blue light with compound microscope?

Description : Why would it be advantages to use blue light with compound microscope?

Last Answer : Ans. The limit, to which a microscope can be used to resolve details, depends upon the width of the objective. A wider objective and use of blue light (short wavelength) produces less diffraction and allows more details to be viewed.

If a person looking through microscope at the full moon, how would the appearance of moon be changed by covering of objective lens?

Description : If a person looking through microscope at the full moon, how would the appearance of moon be changed by covering of objective lens?

Last Answer : Ans. He will observe the full image but its brightness will be reduced. In other word, the intensity of light will decreased.

One can buy cheap microscope for use of children. The images seen in such microscope have colored edges, why is this so?

Description : One can buy cheap microscope for use of children. The images seen in such microscope have colored edges, why is this so?

Last Answer : Ans. The images in microscope have colored edges because of defects in lenses. Such a defect is known as chromatic aberration. In such a problem, a lens can’t bring all rays of white light to a single point on image. So image is not sharp and has colored edges.

Explain the difference between the angular magnification and resolving power of optical instrument. What limits the magnification of an optical instrument?

Description : Explain the difference between the angular magnification and resolving power of optical instrument. What limits the magnification of an optical instrument?

Last Answer : Angular magnification: The ratio of the angle subtended by the image as seen through the optical device to that subtended by the object at the un-aided eye Resolving Power: It is the ... object under examination. The magnification of an optical instrument is limited due to defects in lenses.

What do you understand by linear magnification and angular magnification? Explain how a convex lens is used as a magnifier?

Description : What do you understand by linear magnification and angular magnification? Explain how a convex lens is used as a magnifier?

Last Answer : Linear Magnification: The ratio of the size of image to the size of object is called linear magnification. Angular magnification: The ratio of the angle subtended by the image as seen through the optical ... lens used as a magnifier when an object is brought within the focal length of convex lens.

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. a. Acceptance angle b. Modes c. Sensors d. Aperture

Last Answer : b. Modes

Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Description : Is the different angle of entry of light into an optical fiber when the diameter of the core is many times the wavelength of the light transmitted. ∙ a. Acceptance angle ∙ b. Modes ∙ c. Sensors ∙ d. Aperture

Last Answer : b. Modes

Which of the following events occurred first? (1) Albert Einstein propounded the General Theory of Relativity (2) Max Planck unveiled the Quantum Theory (3) Marconi first transmitted a wireless signal (4) Madame Marie Curie be-came the first woman Nobel Prize winner

Description : Which of the following events occurred first? (1) Albert Einstein propounded the General Theory of Relativity (2) Max Planck unveiled the Quantum Theory (3) Marconi first transmitted a wireless signal (4) Madame Marie Curie be-came the first woman Nobel Prize winner

Last Answer : (2) Max Planck unveiled the Quantum Theory Explanation: General Theory of Relativity: a theory of gravitation developed by Einstein in the years 1907-1915; Quantum Theory of Max Planck: 1900; ... woman Nobel Prize winner: shared her 1903 Nobel Prize in Physics with her husband Pierre Curie.

Which of the following events occurred first? (1) Albert Einstein propounded the General Theory of Relativity (2) Max Planck unveiled the Quantum Theory (3) Marconi first transmitted a wireless signal (4) Madame Marie Curie became the first woman Nobel Prize winner

Description : Which of the following events occurred first? (1) Albert Einstein propounded the General Theory of Relativity (2) Max Planck unveiled the Quantum Theory (3) Marconi first transmitted a wireless signal (4) Madame Marie Curie became the first woman Nobel Prize winner

Last Answer : (2) Max Planck unveiled the Quantum Theory Explanation: General Theory of Relativity: a theory of gravitation developed by Einstein in the years 1907-1915; Quantum Theory of Max Planck: 1900; ... transmission on December 11, 1901; and Madame Curie becoming the first woman Nobel Prize winner.

In an optical fibre the signal is transmitted – (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Description : In an optical fibre the signal is transmitted – (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Last Answer : (3) due to total internal reflection Explanation: Total internal reflection is the basic concept be-hind the optical fiber. Optical fiber employs the transmission of light down fibers of plastic ... refractive index to allow more light to be guided along the fiber through total internal refraction.

A television channel is characterized by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Description : A television channel is characterized by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Last Answer : (1) frequency of transmitted signal Explanation: A television channel is a physical or virtual channel over which a television station or television network is distributed. Channel numbers represent actual frequencies used to ... .75 MHz for analog audio (FM), or 55.31 MHz for digital ATSC (8VSB).

Unwanted signal that distorts a transmitted signal is called A. analogue B. noise C. digital D. tuning

Description : Unwanted signal that distorts a transmitted signal is called A. analogue B. noise C. digital D. tuning

Last Answer : noise

Phenomena in which signal transmitted in one circuit creates undesired effect in other circuit is known as A. crosstalk B. signal attenuation C. sampling D. crosslinking

Description : Phenomena in which signal transmitted in one circuit creates undesired effect in other circuit is known as A. crosstalk B. signal attenuation C. sampling D. crosslinking

Last Answer : crosslinking

In an optical fibre the signal is transmitted (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Description : In an optical fibre the signal is transmitted (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Last Answer :  due to total internal reflection

A television channel is characterised by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Description : A television channel is characterised by (1) frequency of transmitted signal (2) velocity of transmitted signal (3) physical dimension of television screen (4) size of picture tube

Last Answer : frequency of transmitted signal

Which waves cannot be transmitted through vacuum - (1) Light (2) Heat (3) Sound (4) Electromagnetic

Description : Which waves cannot be transmitted through vacuum - (1) Light (2) Heat (3) Sound (4) Electromagnetic

Last Answer : (3) Sound Explanation: Sound waves cannot be transmitted through vacuum. It is transmitted by the movement of particles along with the direction of the motion of the sound wave. More generally, sound is a mechanical disturbance which is dependent upon a medium to travel.

These waves cannot be transmitted through vacuum (1) Light (2) Sound (3) Heat (4) Electromagnetic

Description : These waves cannot be transmitted through vacuum (1) Light (2) Sound (3) Heat (4) Electromagnetic

Last Answer : Sound

The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation

Description : The loss in signal power as light travels down a fiber is called a. Dispersion b. Scattering c. Absorption d. Attenuation

Last Answer : d. Attenuation

ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Description : ECE Board Exam November 1996 The loss in signal power as light travels down a fiber is A. attenuation B. propagation C. absorption D. scattering

Last Answer : A. attenuation

The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption

Description : The loss in signal power as light travels down the fiber is called a. attenuation b. progragation c. scattering d. interruption

Last Answer : attenuation

The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Description : Why are visible-light LEDs not used for fiber optics? ∙ a. It has high losses ∙ b. It has short wave ∙ c. It has low attenuation ∙ d. It has weak signal

Last Answer : ∙ a. It has high losses

The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation

Description : The loss in signal power as light travels down a fiber is called ∙ a. Dispersion ∙ b. Scattering ∙ c. Absorption ∙ d. Attenuation

Last Answer : ∙ d. Attenuation

The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Description : The loss in signal power as light travels down the fiber is called ............. A) Attenuation B) Propagation C) Scattering D) Interruption

Last Answer : A) Attenuation

The speed of light through a single-mode optical fiber is approximately: w) c (equal to 3 x 108 m/s) x) 70 percent of c y) 80 percent of c z) 90 percent of c

Description : The speed of light through a single-mode optical fiber is approximately: w) c (equal to 3 x 108 m/s) x) 70 percent of c y) 80 percent of c z) 90 percent of c

Last Answer : ANSWER: X -- 70 PERCENT OF c

It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Description : It indicates what signal frequencies can be propagated through a given distance of fiber cable. ∙ A. Bandwidth Distance Product ∙ B. Pulse width dispersion ∙ C. Rise time ∙ D. Cutoff frequency

Last Answer : A. Bandwidth Distance Product

Which of the following events occurred first? (1) Albert Einstein propounded the General Theory of Relativity (2) Max Planck unveiled the Quantum Theory (3) Marconi first transmitted a wireless signal (4) Madame Marie Curie be-came the first woman Nobel Prize winner

Description : Which of the following events occurred first? (1) Albert Einstein propounded the General Theory of Relativity (2) Max Planck unveiled the Quantum Theory (3) Marconi first transmitted a wireless signal (4) Madame Marie Curie be-came the first woman Nobel Prize winner

Last Answer : (2) Max Planck unveiled the Quantum Theory Explanation: General Theory of Relativity: a theory of gravitation developed by Einstein in the years 1907-1915; Quantum Theory of Max Planck: 1900; ... woman Nobel Prize winner: shared her 1903 Nobel Prize in Physics with her husband Pierre Curie.

A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Last Answer : B. Downlink

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Description : What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Last Answer : A. Virtual height

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Description : The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Last Answer : B. Closer coupling between the oscillator and the antenna.

Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Last Answer : B. Down link

Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Description : Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Last Answer : C. Major lobe radiation

What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Description : What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Last Answer : B. Frequency

Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Description : Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Last Answer : C. Downlink

A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Description : A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Last Answer : C. cross talk

ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Description : ARQ is transmitted in the event of: (A) Loss of signal (B) Error in received data (C) Improve reliability (D) During time out

Last Answer : (B) Error in received data

Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Description : Sound waves transmitted from a source are sometimes weak when they reach the detector. What instrument is needed to boost the weak signal?

Last Answer : An amplifier.

What signal is used to synchronize the coherent oscillator to a fixed phase relationship with the transmitted pulse?

Description : What signal is used to synchronize the coherent oscillator to a fixed phase relationship with the transmitted pulse?

Last Answer : Coho lock pulse.

A function of an optic isolator ∙ a. Cancels reflective waves ∙ b. Amplifies signal transmitted ∙ c. Filters unnecessary signals ∙ d. All of these

Description : A function of an optic isolator ∙ a. Cancels reflective waves ∙ b. Amplifies signal transmitted ∙ c. Filters unnecessary signals ∙ d. All of these

Last Answer : a. Cancels reflective waves

If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is

Description :  If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m 

Last Answer :  If it takes a transmitted signal 1m sec to go up to the target and come back after reflection, how far is the transmitter from the target? A) 150 Km B) 150 m C) 15 Km D) 1500 m 

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in – (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to an-other place without the movement of particles is called conduction Example: Heat transfer through Metal rods. On the ... heated particles of the substance. The fluids (liquids and gases) are heated by this process.

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in - (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : (2) Convection Explanation: The process of heat transfer from one place to another place without the movement of particles is called conduction,

Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Description : Heat is transmitted from higher temperature to lower temperature through the actual motion of the molecules in (1) Conduction (2) Convection (3) Radiation (4) Both conduction and convection

Last Answer : Convection

Trichomonas vaginalis is transmitted through a) water b) light c) sexual contact c) none of these

Description : Trichomonas vaginalis is transmitted through a) water b) light c) sexual contact c) none of these

Last Answer : c) sexual contact

In order for fiber optics to work, the incident light inside the fiber must hit the wall of the fiber at: w) 90 degrees x) 45 degrees y) an angle greater than the critical angle z) none of the above

Description : In order for fiber optics to work, the incident light inside the fiber must hit the wall of the fiber at: w) 90 degrees x) 45 degrees y) an angle greater than the critical angle z) none of the above

Last Answer : ANSWER: Y -- AN ANGLE GREATER THAN THE CRITICAL ANGLE 

Fiber optics cable used in communication, works on the principle of (1) regular reflection of light (2) diffuse reflection of light (3) refraction of light (4) total internal reflection of light

Description : Fiber optics cable used in communication, works on the principle of (1) regular reflection of light (2) diffuse reflection of light (3) refraction of light (4) total internal reflection of light

Last Answer : total internal reflection of light