What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

What is the method of diversity reception where the signal is transmitted on 2 different
frequencies over the same path?
A. Quadruple
B. Frequency
C. Polarization
D. Space
by

2 Answers

Answer :

What is the method of diversity reception where the signal is transmitted on 2 different
frequencies over the same path?
A. Quadruple
B. Frequency
C. Polarization
D. Space
by

Answer :

B. Frequency
by

Related questions

Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Description : Space diversity transmission means transmitting and receiving on _______. A. Two or more antennas operating on two different frequencies B. Two or more identical frequencies C. Two or more antennas operating on the same frequency D. Two or more different frequency

Last Answer : C. Two or more antennas operating on the same frequency

The best solution to fading is _____. A. space diversity B. frequency diversity C. polarization diversity D. wavelength diversity

Description : The best solution to fading is _____. A. space diversity B. frequency diversity C. polarization diversity D. wavelength diversity

Last Answer : A. space diversity

Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Description : Space diversity transmission means transmitting and receiving on A. two or more antennas operating on two different frequencies B. two or more identical frequencies C. two or more different frequencies D. two or more antennas operating on the same frequencies

Last Answer : D. two or more antennas operating on the same frequencies

Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Description : Part of a microwave link can be approximated by free space conditions. The antenna gain are each 40 dB, the frequency is 10 GHz, and the path length is 80 km. Calculate the receive power for a transmitted power of 10 W? A. 0.871 μW B. 871 μW C. 0.871 mW D. 871 nW

Last Answer : A. 0.871 μW

ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the same as that of the intermediate frequency C. Generates a 1kHz note for Morse code reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz

Description : ECE Board Exam March 1996 What is the purpose of a beat frequency oscillator (BFO)? A. Aid in the reception of weak voice-modulated signals B. Generates a signal, whose frequency is the ... reception D. Generates an output, whose frequency differs from that of the intermediate frequency by 1 kHz

Last Answer : C. Generates a 1kHz note for Morse code reception

Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or load resistor B. noise factor expressed in decibels C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signal D. S/N of an ideal system divided by S/N at the output of the receiver or amplifier under test, both working at the same temperature over the same bandwidth and fed from the same source

Description : Indicate the false statement. Noise figure is defined as A. the ratio of the S/N power supplied at the input terminal of a receiver or amplifier to the S/N power supplied to the output or ... under test, both working at the same temperature over the same bandwidth and fed from the same source

Last Answer : C. an unwanted form of energy tending to interfere with the proper and easy reception and reproduction of wanted signals

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Description : Which frequency reuse method is less effective because of Faraday’s effect? A. Dual polarization B. Reducing antenna beamwidth C. Zonal rotation D. Spin stabilization

Last Answer : A. Dual polarization

Two or more antennas separated by 9 wavelengths are used. A. Hybrid diversity B. Space diversity C. Polarized diversity D. Frequency diversity

Description : Two or more antennas separated by 9 wavelengths are used. A. Hybrid diversity B. Space diversity C. Polarized diversity D. Frequency diversity

Last Answer : B. Space diversity

Stacking antennas at various angles results in A. a more omnidirectional reception B. a more unidirectional reception C. a more omnidirectional reception D. an overall reception signal increase

Description : Stacking antennas at various angles results in A. a more omnidirectional reception B. a more unidirectional reception C. a more omnidirectional reception D. an overall reception signal increase

Last Answer : A. a more omnidirectional reception

What region around a broadcasting transmitter in which satisfactory reception of broadcasting signal is not obtained? A. Fringe area B. Primary are C. Secondary area D. Tertiary area

Description : What region around a broadcasting transmitter in which satisfactory reception of broadcasting signal is not obtained? A. Fringe area B. Primary are C. Secondary area D. Tertiary area

Last Answer : A. Fringe area

What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Description : What signal-to-noise ratio is required for satisfactory television reception? A. 10 dB B. 30 dB C. 40 dB D. 20 dB

Last Answer : C. 40 dB

The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Description : The signal to noise ratio that is required for a satisfactory television reception. A. 30 dB B. 40 dB C. 10 dB D. 20 dB

Last Answer : B. 40 dB

How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

Description : How can multiple earth stations share a satellite on the same frequencies? A. Frequency reuse B. Multiplexing C. Mixing D. Frequency hopping

Last Answer : A. Frequency reuse

What determines antenna polarization? A. The frequency of the radiated wave B. The direction of the radiated wave C. The direction of the magnetic field vector D. The direction of the electric field vector

Description : What determines antenna polarization? A. The frequency of the radiated wave B. The direction of the radiated wave C. The direction of the magnetic field vector D. The direction of the electric field vector

Last Answer : D. The direction of the electric field vector

When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Description : When no signal is being received, the loudspeaker is not entirely silent as a result of the presence of A. parasitic oscillations in some of the receiver stages. B. negative feedback in each stage. C. spurious frequencies as a result of improper neutralization. D. internal receiver noise.

Last Answer : D. internal receiver noise.

A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Description : A 1 Mhz carrier is amplitude modulated by a pure 200-Hz audio test tone. Which of the following combinations of frequencies represent the total content of the AM signal? A. 1 MHz and 200 Hz B. 1 MHz and 1000.2 kHz C. 999.8 kHz, 1000 kHz, and 1000.2 kHz D. 999.8 kHz and 1000.2 kHz

Last Answer : C. 999.8 kHz, 1000 kHz, and 1000.2 kHz

A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Description : A porous material is far more efficient at high than low frequency absorption. How to improve sound absorption at lower frequencies using this absorber? A. Increase the thickness B. Decrease the thickness C. Mount with and airspace behind D. Both A and C above

Last Answer : D. Both A and C above

In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Description : In cellular system, _____ defines the geographic distance that is required between cells using identical frequencies in order to avoid interference between the radio transmissions at these cells. A. frequency-reuse ratio B. distance-to-reuse ratio (D/R) C. reuse format plan ratio D. reuse factor

Last Answer : B. distance-to-reuse ratio (D/R)

Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Description : Which of the following is designated as the international distress, safety and calling frequency for radio telephony for stations of the maritime mobile service when using frequencies in the authorized bands between 156 and 174 MHz? A. 165.8 MHz B. 156.8 MHz C. 158.6 MHz D. 168.5 MHz

Last Answer : B. 156.8 MHz

Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Description : Emission on a frequency or frequencies immediately outside the necessary bandwidth which result from the modulation process except spurious emission. A. Radiation B. Noise C. Out of the band D. Interference

Last Answer : C. Out of the band

One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Description : One of the reasons why FDM is being replaced by TDM is A. noise is amplified with voice when an FDM system is used B. it is difficult to place channels side by side C. there is more time than frequency D. Most available frequencies has been used

Last Answer : A. noise is amplified with voice when an FDM system is used

What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Description : What does the noise weighting curve shows? A. Noise signals measured with a 144 handset B. Power levels of noise found in carrier systems C. The interfering effect of other frequencies in a voice ... a reference frequency of one kilohertz D. Interfering effects of signals compared with a 3-kHz tone

Last Answer : C. The interfering effect of other frequencies in a voice channel compared with a reference frequency of one kilohertz

A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Description : A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

Last Answer : B. Downlink

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Description : What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Last Answer : A. Virtual height

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Description : The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Last Answer : B. Closer coupling between the oscillator and the antenna.

Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Last Answer : B. Down link

Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Description : Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Last Answer : C. Major lobe radiation

Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Description : Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Last Answer : C. Downlink

What noise is observable at frequencies in the range from about 8 MHz to somewhat 1.5 GHz? A. Industrial noise B. Atmospheric noise C. Space noise D. Shot noise

Description : What noise is observable at frequencies in the range from about 8 MHz to somewhat 1.5 GHz? A. Industrial noise B. Atmospheric noise C. Space noise D. Shot noise

Last Answer : C. Space noise

Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves

Description : Electromagnetic waves of frequencies arbitrarily lower than 3,000 GHz, propagated in space without artificial guide. A. Space waves B. Terrestrial waves C. Mobile D. Hertzian waves

Last Answer : D. Hertzian waves

A one-hop, full duplex, microwave system in a space diversity arrangement. Determine “how many receivers in all are used?” A. 8 B. 2 C. 4 D. 6

Description : A one-hop, full duplex, microwave system in a space diversity arrangement. Determine “how many receivers in all are used?” A. 8 B. 2 C. 4 D. 6

Last Answer : B. 2

When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Description : When a wide band of frequencies is transmitted simultaneously, each frequency will vary in the amount of fading. What is this variable fading called?

Last Answer : Selective fading.

The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSSC)FHSSD)TDM

Description : The _______ technique uses M different carrier frequencies that are modulated by the source signal. At one moment, the sign modulates one carrier frequency; at the next moment, thesignal modulates another carrier frequency. A) FDM B) DSSS C) FHSS D) TDM

Last Answer : FHSS

Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Description : Type of transmission path that permits communication in the frequency range from 30 to 60 MHz and over distances form about 1000 to 2000 km. A. Ducting B. Ionospheric scatter C. Microwave D. Troposcatter

Last Answer : B. Ionospheric scatter

The polarization of a radio wave: A. Is perpendicular to the electrostatic field of the antenna B. Is the same direction as the electrostatic field of the antenna. C. Is the same direction as the magnetic field of the antenna. D. Is perpendicular to both the electrostatic and magnetic fields of the antenna.

Description : The polarization of a radio wave: A. Is perpendicular to the electrostatic field of the antenna B. Is the same direction as the electrostatic field of the antenna. C. Is the same direction ... field of the antenna. D. Is perpendicular to both the electrostatic and magnetic fields of the antenna.

Last Answer : B. Is the same direction as the electrostatic field of the antenna.

What do you call the energy that was not radiated into space or completely transmitted? A. Incident waves B. Captured waves C. Standing waves D. Modulated waves

Description : What do you call the energy that was not radiated into space or completely transmitted? A. Incident waves B. Captured waves C. Standing waves D. Modulated waves

Last Answer : C. Standing waves

Energy that has neither been radiated into space nor completely transmitted. A. Captured waves B. Incident waves C. Standing waves D. Modulated waves

Description : Energy that has neither been radiated into space nor completely transmitted. A. Captured waves B. Incident waves C. Standing waves D. Modulated waves

Last Answer : C. Standing waves

The signal path from satellite to earth-based receiver. A. Downlink signal B. Uplink signal C. Incident signal D. Reflected signal

Description : The signal path from satellite to earth-based receiver. A. Downlink signal B. Uplink signal C. Incident signal D. Reflected signal

Last Answer : A. Downlink signal

The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal

Description : The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal

Last Answer : A. Uplink signal

Is a loss of power of a satellite downlink signal due to earth’s atmosphere. A. Atmospheric loss B. Path loss C. Radiation loss D. RFI

Description : Is a loss of power of a satellite downlink signal due to earth’s atmosphere. A. Atmospheric loss B. Path loss C. Radiation loss D. RFI

Last Answer : B. Path loss

Diversity reception system is used to minimize the troubles due to

Last Answer : Diversity reception system is used to minimize the troubles due to General fading, Synchronous fading.

In an optical fibre the signal is transmitted – (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Description : In an optical fibre the signal is transmitted – (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Last Answer : (3) due to total internal reflection Explanation: Total internal reflection is the basic concept be-hind the optical fiber. Optical fiber employs the transmission of light down fibers of plastic ... refractive index to allow more light to be guided along the fiber through total internal refraction.

A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Description : A noise where foreign signal enters the path of the transmitted signal is called …… A. Impulse B. Inter modulation C. cross talk D. both b and c

Last Answer : C. cross talk

In an optical fibre the signal is transmitted (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Description : In an optical fibre the signal is transmitted (1) in a straight line path (2) In a curved path (3) due to total internal reflection (4) Due to refraction

Last Answer :  due to total internal reflection

What type of polarization should be used if an antenna is mounted on a moving vehicle at frequencies below 50 megahertz?

Description : What type of polarization should be used if an antenna is mounted on a moving vehicle at frequencies below 50 megahertz?

Last Answer : Vertical polarization.

What is an advantage of using horizontal polarization at high frequencies?

Description : What is an advantage of using horizontal polarization at high frequencies?

Last Answer : Less interference is experienced by man-made noise sources