A satellite signal transmitted from a satellite transponder to earth’s station. A. Uplink B. Downlink C. Terrestrial D. Earthbound

A satellite signal transmitted from a satellite transponder to earth’s station.
A. Uplink
B. Downlink
C. Terrestrial
D. Earthbound
by

1 Answer

Answer :

B. Downlink
by

Related questions

Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Description : Satellite signal transmitted from a satellite transponder to earth’s station. A. Vertically polarized B. Uplink C. Downlink D. RHCP

Last Answer : C. Downlink

Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Description : Known as the satellite transmitted signal form a satellite transponder to earth’s station. A. Uplink B. Down link C. RHCP D. Vertically polarized

Last Answer : B. Down link

The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal

Description : The signal path from earth station satellite A. Uplink signal B. Reflected signal C. Incident signal D. Downlink signal

Last Answer : A. Uplink signal

A microwave link between the earth station and the down-town terminal. A. STL B. Uplink C. Downlink D. Terrestrial link

Description : A microwave link between the earth station and the down-town terminal. A. STL B. Uplink C. Downlink D. Terrestrial link

Last Answer : D. Terrestrial link

The signal path from satellite to earth-based receiver. A. Downlink signal B. Uplink signal C. Incident signal D. Reflected signal

Description : The signal path from satellite to earth-based receiver. A. Downlink signal B. Uplink signal C. Incident signal D. Reflected signal

Last Answer : A. Downlink signal

Is a loss of power of a satellite downlink signal due to earth’s atmosphere. A. Atmospheric loss B. Path loss C. Radiation loss D. RFI

Description : Is a loss of power of a satellite downlink signal due to earth’s atmosphere. A. Atmospheric loss B. Path loss C. Radiation loss D. RFI

Last Answer : B. Path loss

Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Description : Designed to receive a signal from a transmitting station on the ground and retransmit it to a receiving station located elsewhere A. Communication satellite B. Repeater C. Relay station D. Transponder

Last Answer : A. Communication satellite

The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Description : The total space loss of transmission and reception for two ground stations with uplink frequency 8GHz and a downlink of 6 GHz with angle of elevations of 3˚ and 7˚ A respectively is A. 403 dB B. 100 dB C. 20 dB D. 215 dB

Last Answer : A. 403 dB

What is the uplink receiver frequency if the downlink transmitter is on channel 4 (3.84 Ghz)? A. 6.065 GHz B. 6.84 GHz C. 6.65 GHz D. 6.05 GHz

Description : What is the uplink receiver frequency if the downlink transmitter is on channel 4 (3.84 Ghz)? A. 6.065 GHz B. 6.84 GHz C. 6.65 GHz D. 6.05 GHz

Last Answer : A. 6.065 GHz

Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station

Description : Station located on an object which is beyond and is intended to go beyond the major portion of the earth’s atmosphere. A. Terrestrial station B. Space station C. Satellite station D. Mobile satellite station

Last Answer : B. Space station

State the reason for keeping uplink and downlink frequency different in satellite communication.

Description : State the reason for keeping uplink and downlink frequency different in satellite communication.

Last Answer : Uplink frequency is used for transmission of signals from earth station transmitter to satellite. Downlink frequency is used for transmission of signals from satellite to earth station receiver. ... the same antenna to be used for both receiving and transmitting simplifying satellite hardware.

The Ku frequency band used in satellite communication (for uplink and downlink) is:

Description : The Ku frequency band used in satellite communication (for uplink and downlink) is: (1) 14 GHz and 11 GHz (2) 30 GHz and 20 GHz (3) 70 GHz and 50 GHz (4) 60 GHz and 45 GHz 

Last Answer : The Ku frequency band used in satellite communication (for uplink and downlink) is: 14 GHz and 11 GHz 

A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Description : A satellite receives an uplink frequency of _______ MHz from a ground station of 3700 MHz. A. 8150 MHz B. 1475 MHz C. 2225 MHz D. 5925 MHz

Last Answer : D. 5925 MHz

What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Description : What satellite subsystem monitors onboard conditions such as temperature and battery voltage and transmits this data back to a ground station for analysis? A. Communications subsystem B. AKM C. TTC D. Transponder

Last Answer : C. TTC

What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Description : What is the propagation delay when a signal is transmitter by an earth station to a geosynchronous satellite about 38,500 km above earth’s equator and then received by the same earth station? A. 256 msec B. 128 msec C. 300 msec D. 400 msec

Last Answer : A. 256 msec

First communication satellites used frequencies of A. 6 GHz for uplink B. 3 GHz for uplink C. 6 GHz for downlink D. 5 GHz for downlink

Description : First communication satellites used frequencies of A. 6 GHz for uplink B. 3 GHz for uplink C. 6 GHz for downlink D. 5 GHz for downlink

Last Answer : 6 GHz for uplink

What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Description : What is the local oscillator (mixer) frequency of the satellite with an uplink frequency in GHz band? A. 3500 MHz B. 4500 MHz C. 2225 MHz D. 2555 MHz

Last Answer : C. 2225 MHz

Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard

Description : Essentially a satellite ___________ is a radio repeater in the sky A. transponder B. comparator C. duplexer D. billboard

Last Answer : A. transponder

The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Description : The satellite communications channels in a transponder are defined by the A. LNA B. bandpass filter C. mixer D. input signals

Last Answer : B. bandpass filter

The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Description : The key electronic component in a communications satellite is the A. telemetry equipment B. on-board computer C. command and control system D. transponder

Last Answer : D. transponder

What is the first passive satellite transponder? A. Sun B. Early Bird C. Score D. Moon

Description : What is the first passive satellite transponder? A. Sun B. Early Bird C. Score D. Moon

Last Answer : B. Early Bird

Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Description : Which of the following is the basic component of a communications satellite receiver? A. On-board computer B. Reflector C. Telemetry D. Transponder

Last Answer : D. Transponder

What is the data rate in Mbps of a single satellite transponder considering an S/N of 30 dB? A. 35.8 B. 3.58 C. 358 D. 3580

Description : What is the data rate in Mbps of a single satellite transponder considering an S/N of 30 dB? A. 35.8 B. 3.58 C. 358 D. 3580

Last Answer : C. 358

Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder

Description : Which of the following satellite subsystem provides stabilization in orbit and senses changes in orientation? A. Attitude control subsystem B. TTC C. AKM D. Transponder

Last Answer : A. Attitude control subsystem

What is the typical satellite transponder bandwidth? A. 24 MHz B. 500 MHz C. 36 MHz D. 48 MHz

Description : What is the typical satellite transponder bandwidth? A. 24 MHz B. 500 MHz C. 36 MHz D. 48 MHz

Last Answer : C. 36 MHz

What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz

Description : What is the quardband between transponder channels in the commercial C-band for satellite communications? A. 6 MHz B. 36 MHz C. 4 MHz D. 2 MHz

Last Answer : C. 4 MHz

The first passive satellite transponder. A. Early bird B. Score C. Moon D. Sputnik

Description : The first passive satellite transponder. A. Early bird B. Score C. Moon D. Sputnik

Last Answer : C. Moon

Which of the following is the uplink frequency in C-band? A. 5.925 GHz B. 4.2 GHz C. 7.425 GHz D. 3.7 GHz

Description : Which of the following is the uplink frequency in C-band? A. 5.925 GHz B. 4.2 GHz C. 7.425 GHz D. 3.7 GHz

Last Answer : A. 5.925 GHz

In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Description : In radio signal emission designation, the fifth symbol means A. Details of signals B. Type of information transmitted C. Nature of multiplexing D. Nature of signal modulating the main carrier

Last Answer : C. Nature of multiplexing

A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Description : A transmitted signal 5 meters in wavelength is received by an antenna coil having a 50-Ω resistance and a 0.01 H inductance. What is the capacitance of the tuner shunting the antenna coil at this point? A. 0.704 fF B. 0.704 μF C. 0.704 nF D. 0.704 mF

Last Answer : A. 0.704 fF

What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Description : What height of an ionized layer is determined from the time interval between the transmitted signal and the ionospheric echo at vertical incidence? A. Virtual height B. Apparent height C. Actual height D. Effective height

Last Answer : A. Virtual height

In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Description : In radio regulation, the first symbol in the designation of radio emission is ______. A. Bandwidth B. Nature of signal(s) modulation the main carrier C. Type of modulation of the main carrier D. Type of information to be transmitted

Last Answer : C. Type of modulation of the main carrier

The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Description : The stability of transmitted signal from a simple Hartley oscillator single transmitter which is coupled to and antenna wire affected by ______. A. Chirping of oscillator B. Closer coupling between the oscillator and the antenna. C. Location of antenna D. Material of antenna

Last Answer : B. Closer coupling between the oscillator and the antenna.

Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Description : Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Last Answer : C. Major lobe radiation

What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Description : What is the method of diversity reception where the signal is transmitted on 2 different frequencies over the same path? A. Quadruple B. Frequency C. Polarization D. Space

Last Answer : B. Frequency

Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Description : Which of the following is not usually a part of a transponder are defined by the A. LNA B. Mixer C. Modulator D. HPA

Last Answer : C. Modulator

How many transponder channels are realized in the commercial C-band without frequency re-use? A. 24 B. 12 C. 36 D. 48

Description : How many transponder channels are realized in the commercial C-band without frequency re-use? A. 24 B. 12 C. 36 D. 48

Last Answer : B. 12

What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Description : What is the maximum theoretical data rate of the above problem if one transponder is used for binary transmission? A. 36 Mbps B. 72 Mbps C.18 Mbps D. 144 Mbps

Last Answer : B. 72 Mbps

Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder

Description : Combination of modulator, channel and detector. A. Transceiver B. Discrete channel C. T/R channel D. Transponder

Last Answer : B. Discrete channel

What height must a satellite be placed above the surface of the earth in order for its rotation to be equal to earth’s rotation? A. 26,426.4 miles B. 27,426.4 miles C. 23,426.4 miles D. 22,426.4 miles

Description : What height must a satellite be placed above the surface of the earth in order for its rotation to be equal to earth’s rotation? A. 26,426.4 miles B. 27,426.4 miles C. 23,426.4 miles D. 22,426.4 miles

Last Answer : D. 22,426.4 miles

A satellite beam that covers almost 42.4% of the earths surface. A. Zone beam B. Hemispheric beam C. Spot beam D. Global beam

Description : A satellite beam that covers almost 42.4% of the earths surface. A. Zone beam B. Hemispheric beam C. Spot beam D. Global beam

Last Answer : D. Global beam

A satellite beam that covers almost 42.4% of earths surface. A. Spot beam B. Global beam C. Zone beam D. Hemispheric beam

Description : A satellite beam that covers almost 42.4% of earths surface. A. Spot beam B. Global beam C. Zone beam D. Hemispheric beam

Last Answer : B. Global beam

The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Description : The control routine necessary to keep the satellite in position is referred to as A. station keeping B. station tracking C. station monitoring D. station maintaining

Last Answer : A. station keeping

What is the approximate path loss from satellite-to-earth station? A. 100 dB B. 150 dB C. 175 dB D. 200 dB

Description : What is the approximate path loss from satellite-to-earth station? A. 100 dB B. 150 dB C. 175 dB D. 200 dB

Last Answer : D. 200 dB

A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Description : A ground station is operating to a geostationary satellite at a 5° angle of elevation. Calculate the round-trip time between ground station and satellite. A. 275 s B. 275 ms C. 137.5 s D. 137.5 ms

Last Answer : B. 275 ms

In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping

Description : In satellite communications, what means of attitude control is using the angular momentum of the spinning body to provide the roll and yaw stabilization? A. Spin stabilization B. Radial stabilization C. Three-axis stabilization D. Station keeping

Last Answer : A. Spin stabilization

What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Description : What satellite system parameter represents the quality of a satellite or an earth station receiver? A. Gain-to-Equivalent Noise Temperature Ratio (G/Te) B. Energy of Bit-to-Noise Density Ratio (Eb/No) C. Carrier-to-Noise Density Ratio (C/No) D. Bit energy

Last Answer : A. Gain-to-Equivalent Noise Temperature Ratio (G/Te)

Satellite system or part of a satellite system, consisting of only one satellite and the operating earth station. A. Satellite system B. Satellite network C. Space system D. Multi-satellite link

Description : Satellite system or part of a satellite system, consisting of only one satellite and the operating earth station. A. Satellite system B. Satellite network C. Space system D. Multi-satellite link

Last Answer : B. Satellite network

A satellite which simply reflects the signal without further amplification A. Passive satellite B. Active satellite C. Geostationary satellite D. Domestic satellite

Description : A satellite which simply reflects the signal without further amplification A. Passive satellite B. Active satellite C. Geostationary satellite D. Domestic satellite

Last Answer : A. Passive satellite

_________ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Horn antenna B. LNA C. Satellite receiver D. Satellite dish

Description : _________ detects the satellite signal relayed from the feed and converts it to an electric current, amplifies and lower its frequency. A. Horn antenna B. LNA C. Satellite receiver D. Satellite dish

Last Answer : B. LNA