A systematic job improvement sequence will consist of :

A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these
by

1 Answer

Answer :

A systematic job improvement sequence will consist of : (A) motion study (B) time study (C) job enrichment (D) all of these

by

Related questions

Continual (Continuous) improvement cycle is based on systematic sequence of -------------- activities. a) SDLC b) PDCA c) waterfall model

Description : Continual (Continuous) improvement cycle is based on systematic sequence of -------------- activities. a) SDLC b) PDCA c) waterfall model

Last Answer :  Ans : b.

The most suitable refrigerant for a commercial ice plant is :

Description : The most suitable refrigerant for a commercial ice plant is : (A) brine (B) NH3 (C) Freon (D) air

Last Answer : Ammonia NH3

Dew point temperature is constant as long as there is :

Description : Dew point temperature is constant as long as there is : (A) no change in moisture content of the air (B) no change in volume of air (C) no change in dry bulb and wet bulb temperature (D) no change in relative and specific humidity of air

Last Answer : Dew point temperature is constant as long as there is : no change in moisture content of the air

The comfort conditions in air conditioning are :

Description : The comfort conditions in air conditioning are : (A) 22 ºC dry bulb temperature and 60% relative humidity (B) 25 ºC dry bulb temperature and 100% relative humidity (C) 20º C dry bulb temperature and 75% relative humidity (D) 15º C bulb temperature and 80% relative humidity

Last Answer : The comfort conditions in air conditioning are : 22 ºC dry bulb temperature and 60% relative humidity 

Air is normally dehumidified by :

Description : Air is normally dehumidified by : (A) injecting water (B) passing steam (C) heating (D) cooling

Last Answer : 1

A fluid in equilibrium cannot sustain :

Description : A fluid in equilibrium cannot sustain : (A) tensile stress (B) compressive stress (C) shear stress (D) bending stress

Last Answer : A fluid in equilibrium cannot sustain : shear stress 

Euler’s dimensionless number relates the following :

Description : Euler’s dimensionless number relates the following : (A) Inertial force and gravity (B) Viscous force and Inertial force (C) Pressure force and Inertial force (D) Pressure force and viscous force

Last Answer : Euler’s dimensionless number relates the following : Pressure force and Inertial force

Power transmitted through a pipe is maximum when the loss of head due to friction is :

Description : Power transmitted through a pipe is maximum when the loss of head due to friction is : (A) one-half of the total head supplied (B) one-third of the total head supplied (C) one-fourth of the total head supplied (D) zero

Last Answer : Power transmitted through a pipe is maximum when the loss of head due to friction is : one-third of the total head supplied 

The efficiency of a centrifugal pump is maximum when its blades are :

Description : The efficiency of a centrifugal pump is maximum when its blades are : (A) straight (B) bent forward (C) bent backward (D) bent forward first and then backward

Last Answer : The efficiency of a centrifugal pump is maximum when its blades are : bent backward

In axial flow fans and turbines, fluid enters and leaves as follows :

Description :  In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Last Answer : In axial flow fans and turbines, fluid enters and leaves as follows : (A) radially, axially (B) axially, radially (C) axially, axially (D) radially, radially

Military type of organisation is known as :

Description : Military type of organisation is known as : (A) line organisation (B) functional organisation (C) line and staff organisation (D) line, staff and functional organisation 

Last Answer : Military type of organisation is known as : line organisation

Production cost refers to prime cost plus :

Description : Production cost refers to prime cost plus : (A) factory overheads (B) factory and administration overheads (C) factory, administration and sales overheads (D) factory, administration, sales overheads and profit

Last Answer : Production cost refers to prime cost plus : factory overheads

In inventory control theory, the economic order quantity is :

Description : In inventory control theory, the economic order quantity is : (A) average level of inventory (B) optimum lot size (C) capacity of a warehouse (D) lost size corresponding to break-even analysis

Last Answer : In inventory control theory, the economic order quantity is : optimum lot size 

In value engineering, the term value refers to :

Description : In value engineering, the term value refers to : (A) manufacturing cost of the product (B) selling price of the product (C) total cost of the product (D) utility of the product

Last Answer : In value engineering, the term value refers to : utility of the product

The main object of scientific layout is :

Description : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Last Answer : The main object of scientific layout is : (A) to produce better quality of product (B) to utilise maximum floor area (C) to minimise production delays (D) all of these

Gantt chart is used for :

Description : Gantt chart is used for : (A) inventory control (B) material handling (C) production schedule (D) machine repair schedules

Last Answer : Gantt chart is used for :  production schedule

A twist drill is a :

Description :  A twist drill is a : (A) side cutting tool (B) front cutting tool (C) end cutting tool (D) none of these

Last Answer :  A twist drill is a : end cutting tool 

Tool life is most affected by :

Description : Tool life is most affected by : (A) cutting speed (B) tool geometry (C) feed and depth (D) microstructure of material being cut

Last Answer : Tool life is most affected by : cutting speed 

The usual ratio of forward and return stroke in shaper is :

Description : The usual ratio of forward and return stroke in shaper is : (A) 2:1 (B) 1:2 (C) 2:3 (D) 3:2

Last Answer : The usual ratio of forward and return stroke in shaper is :  3:2

Binding material used in cemented carbide tools is :

Description : Binding material used in cemented carbide tools is : (A) Nickel (B) Cobalt (C) Chromium (D) Silicon

Last Answer : Binding material used in cemented carbide tools is : Cobalt 

Angle between the shear plane and work surface is known as :

Description : Angle between the shear plane and work surface is known as : (A) lip angle (B) rake angle (C) cutting angle (D) shear angle

Last Answer : Angle between the shear plane and work surface is known as : shear angle

Material having highest cutting speed is :

Description : Material having highest cutting speed is : (A) Cast iron (B) Bronze (C) Aluminium (D) High carbon steel

Last Answer : Material having highest cutting speed is : Aluminium

If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is

Description : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : ... at the first one (C) One fourth of the first one (D) One and half times the first one

Last Answer : If the rotating mass of a rim type flywheel is distributed on another rim type flywheel whose mean radius is half the mean radius of the former, then the energy stored in the latter at the same speed will be : One fourth of the first one

The train value of a gear train is :

Description : The train value of a gear train is : (A) equal to velocity ratio (B) reciprocal of velocity ratio (C) always greater than unity (D) none of the above

Last Answer : The train value of a gear train is : reciprocal of velocity ratio

The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as :

Description : The ratio of maximum displacement of the forced vibration to the deflection due to static force is known as : (A) Damping Factor (B) Damping Coefficient (C) Logarithmic Decrement (D) Magnification Factor

Last Answer : Magnification Factor

Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting

Description : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : (A) 2:3 (B) 3:5 (C) 3:2 (D) 7:4

Last Answer : Two metallic blocks having masses in the ratio 2:3 are made to slide down a frictionless inclined plane starting from rest position. When the blocks reach the bottom of the inclined plane, they will have their kinetic energies in the ratio : 2:3

A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as

Description : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as 1. Shift 2. Sand wash 3. Swell 4. Scab

Last Answer : A casting defect which occurs near the ingates as rough lumps on the surface of a casting is known as Sand wash

The property of sand due to which the sand grains stick together, is called

Description : The property of sand due to which the sand grains stick together, is called 1. Collapsibility 2. Permeability 3. Cohesiveness 4. Adhesiveness

Last Answer : The property of sand due to which the sand grains stick together, is called Cohesiveness 

In die casting, machining allowance is

Description : In die casting, machining allowance is 1. Small 2. Large 3. Very large 4. Not provided

Last Answer : In die casting, machining allowance is Not provided

The mode of deformation of the metal during spinning is

Description : The mode of deformation of the metal during spinning is 1.Bending 2.Stretching 3.Bending and stretching 4.Rolling and stretching

Last Answer : The mode of deformation of the metal during spinning is Bending and stretching

Structural sections such as rails, angles, I-beams are made by

Description : Structural sections such as rails, angles, I-beams are made by 1. Hot rolling 2. Hot drawing 3. Hot piercing 4. Hot extrusion

Last Answer : Structural sections such as rails, angles, I-beams are made by Hot rolling

The process extensively used for making bolts and nuts is

Description : The process extensively used for making bolts and nuts is 1. Hot piercing 2. Extrusion 3. Cold peening 4. Cold heading

Last Answer : The process extensively used for making bolts and nuts is Cold heading

The cold chisels are made by

Description : The cold chisels are made by 1. Drawing 2. Rolling 3. Forging 4. Piercing

Last Answer : The cold chisels are made by Forging 

Welding of glass is done by

Description : Welding of glass is done by 1. Ultrasonic welding 2. Electron beam welding 3. Laser beam welding 4. Explosive welding

Last Answer : Welding of glass is done by Laser beam welding

Linde welding uses

Description : Linde welding uses 1.Neutral flame and rightward technique 2.Carburizing flame and rightward technique 3.Neutral flame and leftward technique 4.Oxidizing flame and leftward technique

Last Answer : Linde welding uses Carburizing flame and rightward technique

Is there a systematic way to distinguish tastes (i.e., like the aroma wheel for **** but for food in general)?

Description : Is there a systematic way to distinguish tastes (i.e., like the aroma wheel for wine but for food in general)?

Last Answer : answer:Not having any luck with general food yet. Hold on. Basic tastes. Tongue map is phoney. Maybe check this out. This site looks decent enough. Here’s a tequila wheel. One for beer. wine several Maybe check out this Journal I dunno.

Puppy training question: Is there some way, reasonably systematic, to find out what treats your dog might like more than others?

Description : Puppy training question: Is there some way, reasonably systematic, to find out what treats your dog might like more than others?

Last Answer : Well, you can usually deduce some of it from what they like in food. Like my cats like tuna, but not salmon or whitefish or other common seafood for cat food, and they like chicken but not ... more, but rather because the rules became clear and were consistent and you were patient and she had time.

Explain why a systematic error can’t be corrected for by taking the mean of many readings.?

Description : Explain why a systematic error can’t be corrected for by taking the mean of many readings.?

Last Answer : I don't understand the relevance of the image to the question. However, your basic idea seems to be close to the correct idea. A systematic error is in contrast to random ... actual value should be. This is why scientists must account for their estimated error using various statistical tools

How does systematic formation of minerals take place? -Geography

Description : How does systematic formation of minerals take place? -Geography

Last Answer : The basic source of all minerals is the hot magma in the interior of the earth. When magma cools, crystals of minerals appear and a systematic series of minerals are formed in sequence to solidify so as to form rocks.

Which software browse the Internet in a systematic manner? (a) Web crawler (b) Web browser -Technology

Description : Which software browse the Internet in a systematic manner? (a) Web crawler (b) Web browser -Technology

Last Answer : (a) Web search engine works by storing information about many Web pages, retrieved by a Web crawler.

What is systematic botany? -Biology

Description : What is systematic botany? -Biology

Last Answer : answer:

What is systematic zoology? -Biology

Description : What is systematic zoology? -Biology

Last Answer : answer:

What is the grouping of organisms into categories according to a systematic plan? -Do You Know?

Description : What is the grouping of organisms into categories according to a systematic plan? -Do You Know?

Last Answer : answer:

Statistical table is the systematic arrangement of numerical data presented in rows and columns. What are the rules to be followed while constructing such a table?

Description : Statistical table is the systematic arrangement of numerical data presented in rows and columns. What are the rules to be followed while constructing such a table?

Last Answer : Statistical table is the systematic arrangement of numerical data presented in rows and columns. ... be followed while constructing such a table?

State general methods to minimise effect of systematic errors.

Description : State general methods to minimise effect of systematic errors.

Last Answer : State general methods to minimise effect of systematic errors.

What is systematic error? Classify errors into different categories.

Description : What is systematic error? Classify errors into different categories.

Last Answer : What is systematic error? Classify errors into different categories.

What does a systematic investigation designed to develop or contribute to generalizable knowledge?

Description : What does a systematic investigation designed to develop or contribute to generalizable knowledge?

Last Answer : what does "systematic investigation designed to develop or contribute to generalizable knowledge" include:

What am I my name means colored bodies and I contain DNA I pass on traits to new cells in a systematic way?

Description : What am I my name means colored bodies and I contain DNA I pass on traits to new cells in a systematic way?

Last Answer : Try chromosome since the word means color.

What is the systematic mistreatment of members of a group based on color of their skin called?

Description : What is the systematic mistreatment of members of a group based on color of their skin called?

Last Answer : Racism

The systematic killing of a certain group of people is called _______.?

Description : The systematic killing of a certain group of people is called _______.?

Last Answer : genocide