The pollutants in environment are measured in PPM, what is the full form of PPM

The pollutants in environment are measured in PPM, what
is the full form of PPM
by

1 Answer

Answer :

Parts Per Million
by

Related questions

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : (4) parts per million Explanation: PPM is an abbreviation of Parts Per Million. It is commonly used as a measure of small levels of pollutants in air, water, body fluids, etc. Parts per million is the mass ratio between the pollutant component and the solution.

The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Description : The presence of pollutants in the environment is usually expressed in ppm, where ppm stands for: (1) particles per mole (2) purity per microgram (3) pollutant prevent measures (4) parts per million

Last Answer : parts per million

Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Description : Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Last Answer : (A) 5

Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)

Description : Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)

Last Answer : D. Dots Per Inch (DPI)

Printer resolution is usually measured in ________ A. Characters Per Minute (CPM) B. Pixels Per Inch (PPI) C. Pages Per Minute (PPM) D. Dots Per Inch (DPI)

Description : Printer resolution is usually measured in ________ A. Characters Per Minute (CPM) B. Pixels Per Inch (PPI) C. Pages Per Minute (PPM) D. Dots Per Inch (DPI)

Last Answer : D. Dots Per Inch (DPI)

Pollutants that are introduced into the environment by human activity are called as ------? A. Qualitative pollutants (Answer) B. Quantitative pollutants C. Anthropogenic pollutants D. All of Above

Description : Pollutants that are introduced into the environment by human activity are called as ------? A. Qualitative pollutants (Answer) B. Quantitative pollutants C. Anthropogenic pollutants D. All of Above

Last Answer : A. Qualitative pollutants (Answer)

Certain substances are classified as water pollutants, others as air pollutants and still others as land pollutants. Which of the following pollutes all three parts of our environment? w) fluorocarbons x) smog y) acid rain z) ozone

Description : Certain substances are classified as water pollutants, others as air pollutants and still others as land pollutants. Which of the following pollutes all three parts of our environment? w) fluorocarbons x) smog y) acid rain z) ozone

Last Answer : ANSWER: Y -- ACID RAIN

As per international norms, the maximum permissible value of noise level in the industrial environment is __________ decibels as measured at a distance of 1.5 metres from the source of noise. (A) 110 (B) 85 (C) 60 (D) 45

Description : As per international norms, the maximum permissible value of noise level in the industrial environment is __________ decibels as measured at a distance of 1.5 metres from the source of noise. (A) 110 (B) 85 (C) 60 (D) 45

Last Answer : (B) 85

Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Description : Solid Sulphur (32 g/mole)pH = 7.16pH in ppm?

Last Answer : PO43−

What is PPM ?

Last Answer : ppm full name parts per milion. But it is a part of the parts per notation method. When something is dissolved in a solution, after a certain period of time the liquids remain the same in all places ... ppm is less , thus ppm is the only way to measure the solution in solution. Source: Bismay.com

Assertion : BOD of river polluted by sewage is more than 20 ppm. Reason: Polluted river contains excess of organic matter.

Description : Assertion : BOD of river polluted by sewage is more than 20 ppm. Reason: Polluted river contains excess of organic matter.

Last Answer : Assertion : BOD of river polluted by sewage is more than 20 ppm. Reason: Polluted river contains excess ... true but reason is wrong D. Both are wrong

Drinking of mineral water with very low levels of pesticides (about 0.02 ppm) for long periods may:

Description : Drinking of mineral water with very low levels of pesticides (about 0.02 ppm) for long periods may:

Last Answer : Drinking of mineral water with very low levels of pesticides (about 0.02 ppm) for long ... . cause leukaemia D. Produce immunity against mosquito.

A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be

Description : A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be

Last Answer : A 500 g toothpaste sample has 0.4 g fluoride concentration. The fluoride concentration in terms of ppm will be A. 200 B. 400 C. 500 D. 800

Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm of potassium chloride is :

Description : Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm of potassium chloride is :

Last Answer : Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm ... : A. 8 B. 4 C. 3 D. 2

If air contains `gt` 100 ppm of `O_(3)` , it causes

Description : If air contains `gt` 100 ppm of `O_(3)` , it causes

Last Answer : If air contains `gt` 100 ppm of `O_(3)` , it causes A. headache and nausca B. hyper tension C. Anoxia D. Hyper thyrodisim

How do you prepare 1000 ppm chloride solution from NaCl?

Description : How do you prepare 1000 ppm chloride solution from NaCl?

Last Answer : What volume of this solution do you desire? Let's say you wantto make 1 liter of such a solution. You would weigh out 1 gram(1000 mg) of NaCl and dissolve it in enough water to make a ... 1000 mg/liter,this is how you make 1 liter of that solution. For larger orsmaller volumes, adjust appropriately.

Is chlorine dangerous at 0.5 ppm?

Description : Is chlorine dangerous at 0.5 ppm?

Last Answer : The permissible exposure limit of OSHA is 1 ppm.

How to convert ph to ppm?

Description : How to convert ph to ppm?

Last Answer : Write an equation representing the ppm concentration: ppm = mass solute (mg) ÷ volume solution (L) Extract the data from the question: mass solute (NaCl) = 0.0045 g. ... Convert the mass in grams to a mass in milligrams: mass NaCl = 0.0045 g = 0.0045 g × 1000 mg/g = 4.5 mg.

Upper safe limit of fluorine in water is (A) 0.4 ppm (B) 0.8 ppm (C) 1.2 ppm (D) 2 ppm

Description : Upper safe limit of fluorine in water is (A) 0.4 ppm (B) 0.8 ppm (C) 1.2 ppm (D) 2 ppm

Last Answer : Answer : C

Dental caries occur due to (A) Drinking water containing less than 0.2 ppm of fluorine (B) Drinking water containing greater than 1.2 ppm of fluorine (C) Drinking water containing high calcium (D) Drinking water containing heavy metals

Description : Dental caries occur due to (A) Drinking water containing less than 0.2 ppm of fluorine (B) Drinking water containing greater than 1.2 ppm of fluorine (C) Drinking water containing high calcium (D) Drinking water containing heavy metals

Last Answer : Answer : A

Fluorosis occurs due to (A) Drinking water containing less than 0.2 ppm of fluorine (B) Drinking water containing high calcium (C) Drinking water containing greater than 1.2 ppm of fluroine (D) Drinking water containing heavy metals

Description : Fluorosis occurs due to (A) Drinking water containing less than 0.2 ppm of fluorine (B) Drinking water containing high calcium (C) Drinking water containing greater than 1.2 ppm of fluroine (D) Drinking water containing heavy metals

Last Answer : Answer : C

What is the concentration of solution in ppm if 2 kg of 2,4-D is mixed with 1000 lit of water?

Description : What is the concentration of solution in ppm if 2 kg of 2,4-D is mixed with 1000 lit of water?

Last Answer : Ans.2000

The permissible and normal limit of EC, RSC, SAR (meq 1 –1 ) and Boron content (ppm)

Description : The permissible and normal limit of EC, RSC, SAR (meq 1 –1 ) and Boron content (ppm)

Last Answer : Ans.2–4, < 2.5, < 10 and 10,000 ha

The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Last Answer : (1) decibel Explanation: Noise pollution refers to any unpleasant, damaging or irritating noise that has the potential to harm people, wildlife or the environment. The decibel (dB) is the main unit used ... can also be measured. by its pitch, which is the frequency of sound vibrations per second.

Which Unit is used to measure the speed of a printer? A. DPI B. CPM C. PPM D. None of the Above

Description : Which Unit is used to measure the speed of a printer? A. DPI B. CPM C. PPM D. None of the Above

Last Answer : C. PPM

For the survival of fish in a river stream, the minimum dissolved oxygen is prescribed A. 3 ppm B. 4 ppm C. 5 ppm D. 10 ppm

Description : For the survival of fish in a river stream, the minimum dissolved oxygen is prescribed A. 3 ppm B. 4 ppm C. 5 ppm D. 10 ppm

Last Answer : ANS: B

If the depletion of oxygen is found to be 5 ppm after incubating a 2.5% solution of sewage sample for 5 days at 21°C, B.O.D. of the sewage is A. 50 ppm B. 100 ppm C. 150 ppm D. 200 ppm

Description : If the depletion of oxygen is found to be 5 ppm after incubating a 2.5% solution of sewage sample for 5 days at 21°C, B.O.D. of the sewage is A. 50 ppm B. 100 ppm C. 150 ppm D. 200 ppm

Last Answer : ANS: D

If 2% solution of a sewage sample is incubated for 5 days at 20°C and depletion of oxygen was found to be 5 ppm, B.O.D. of the sewage is A. 200 ppm B. 225 ppm C. 250 ppm D. None of these

Description : If 2% solution of a sewage sample is incubated for 5 days at 20°C and depletion of oxygen was found to be 5 ppm, B.O.D. of the sewage is A. 200 ppm B. 225 ppm C. 250 ppm D. None of these

Last Answer : ANS: C

Pick up the correct statement from the following: A. Hydrogen sulphide gas in excess, may cause corrosion of concrete sewers B. 4 ppm of Dissolved Oxygen (D.O.) is ensured before discharging the treated sewage in river C. Solubility of oxygen in sewage is 95% of that of distilled water D. All the above

Description : Pick up the correct statement from the following: A. Hydrogen sulphide gas in excess, may cause corrosion of concrete sewers B. 4 ppm of Dissolved Oxygen (D.O.) is ensured before discharging the treated ... river C. Solubility of oxygen in sewage is 95% of that of distilled water D. All the above

Last Answer : ANS: D

Pick up the correct statement from the following: A. In treated sewage, 4 ppm of D.O. is essential B. Only very fresh sewage contains some dissolved oxygen C. The solubility of oxygen in sewage is 95% that is in distilled water D. All the above

Description : Pick up the correct statement from the following: A. In treated sewage, 4 ppm of D.O. is essential B. Only very fresh sewage contains some dissolved oxygen C. The solubility of oxygen in sewage is 95% that is in distilled water D. All the above

Last Answer : ANS: D

Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Description : Ethyl mercaptan is added to the Doctor negative LPG for facilitating the detection of its leakage (by bad odour) to the extent of about __________ ppm. (A) 1 (B) 50 (C) 5000 (D) 10000

Last Answer : (B) 50

What do you mean by (a) ppm (b) mass%

Description : What do you mean by (a) ppm (b) mass%

Last Answer : Ans. (a) It is the parts of a component or solute per million parts of the solution. (b) The mass% of a component in a given solution is the mass of the component per 100 g of the solution.

Disolved oxygen (DO) in water should be? A. 400 to 800 ppm B. 4000 to 8000 ppm C. 0.4 to 0.5 ppm D. 4 to 5 ppm (Answer)

Description : Disolved oxygen (DO) in water should be? A. 400 to 800 ppm B. 4000 to 8000 ppm C. 0.4 to 0.5 ppm D. 4 to 5 ppm (Answer)

Last Answer : D. 4 to 5 ppm (Answer)

Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons (b) permission to use only pure diesel with a maximum of 500 ppm sulphur as fuel for vehicles (c) use of non-polluting compressed natural gas (CNG) only as fuel by all buses and trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Description : Steps taken by the Government of India to control air pollution include (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and ... trucks (d) compulsory mixing of 20% ethyl alcohol with petrol and 20% biodiesel with diesel.

Last Answer : (a) compulsory PUC (Pollution under control) certification of petrol driven vehicles which tests for carbon monoxide and hydrocarbons

The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Description : The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Last Answer : (B) 30 ppm

The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Description : The average concentration of carbon dioxide in the atmosphere is : (A) 0.03 ppm (B) 30 ppm (C)0.3 ppm (D) 300 ppm

Last Answer : (D) 300 ppm

The present level of carbon-dioxide in atmosphere is : (A)190 ppm (B) 295 – 300 ppm (C) 420 – 460 ppm (D) 490 ppm

Description : The present level of carbon-dioxide in atmosphere is : (A)190 ppm (B) 295 – 300 ppm (C) 420 – 460 ppm (D) 490 ppm

Last Answer : (B) 295 – 300 ppm

Storage life of vegetables increased by the use of GA spray at harvesting time a. 50 ppm b. 100 ppm c. 200 ppm d. None of above

Description : Storage life of vegetables increased by the use of GA spray at harvesting time a. 50 ppm b. 100 ppm c. 200 ppm d. None of above

Last Answer : 50 ppm

Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000

Description : Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000

Last Answer : (A) 50

Tolerable limit of nitrogen oxides in air is __________ ppm. (A) 0.1 (B) 1 (C) 5 (D) 25

Description : Tolerable limit of nitrogen oxides in air is __________ ppm. (A) 0.1 (B) 1 (C) 5 (D) 25

Last Answer : (C) 5

TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100(D) 1000

Description : TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100 (D) 1000

Last Answer : (A) 0.1

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Description : Dissolved oxygen content in river water is around __________ ppm. (A) 5 (B) 100 (C) 250 (D) 500

Last Answer : (A) 5

Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Description : Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Last Answer : (D) 5000

A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Last Answer : (D) 10000 to 100000

Death may occur, when SO2 concentration in atmospheric air exceeds __________ ppm.(A) 20 (B) 100 (C) 400 (D) 200

Description : Death may occur, when SO2 concentration in atmospheric air exceeds __________ ppm. (A) 20 (B) 100 (C) 400 (D) 200

Last Answer : (C) 400

TLV of mercury in potable (drinking) water is about __________ ppm. (A) 0.001 (B) 0.1 (C) 1 (D) 5

Description : TLV of mercury in potable (drinking) water is about __________ ppm. (A) 0.001 (B) 0.1 (C) 1 (D) 5

Last Answer : (A) 0.001

When the concentration of SO2 in air is greater than __________ ppm, it gives a pungent smell. (A) 0.01 (B) 0.1 (C) 1 (D) 4

Description : When the concentration of SO2 in air is greater than __________ ppm, it gives a pungent smell. (A) 0.01 (B) 0.1 (C) 1 (D) 4

Last Answer : (D) 4

Beyond what concentration of H2S in air, acute danger to human life exists? (A) 50 ppm (B) 100 ppm (C) 300 ppm (D) 700 ppm

Description : Beyond what concentration of H2S in air, acute danger to human life exists? (A) 50 ppm (B) 100 ppm (C) 300 ppm (D) 700 ppm

Last Answer : (D) 700 ppm