Which Unit is used to measure the speed of a printer? A. DPI B. CPM C. PPM D. None of the Above

Which Unit is used to measure the speed of a printer? A. DPI B. CPM C. PPM D. None of the Above
by

1 Answer

Answer :

C. PPM
by
selected

Related questions

What are the units used to count the speed of a printer? 1) CPM 2) DPI 3) PPM 4) BIT

Description : What are the units used to count the speed of a printer? 1) CPM 2) DPI 3) PPM 4) BIT

Last Answer : 4) BIT

Printer resolution is usually measured in ________ A. Characters Per Minute (CPM) B. Pixels Per Inch (PPI) C. Pages Per Minute (PPM) D. Dots Per Inch (DPI)

Description : Printer resolution is usually measured in ________ A. Characters Per Minute (CPM) B. Pixels Per Inch (PPI) C. Pages Per Minute (PPM) D. Dots Per Inch (DPI)

Last Answer : D. Dots Per Inch (DPI)

Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)

Description : Printer resolution is a numerical measure of print quality that is measured in _______ A. Pages Per Minute (PPM) B. Lines Per Minute (LPM) C. Characters Per Second (CPS) D. Dots Per Inch (DPI)

Last Answer : D. Dots Per Inch (DPI)

The unit KIPS is used to measure the speed of: a) Processor b) Disk drive c) Printer d) Tape drive e) None of these

Description : The unit KIPS is used to measure the speed of: a) Processor b) Disk drive c) Printer d) Tape drive e) None of these

Last Answer : a) Processor

The unit of KIPS is used to measure the speed of________ 1) Processor 2) Disk Drive 3) Printer 4) Tape Drive

Description : The unit of KIPS is used to measure the speed of________ 1) Processor 2) Disk Drive 3) Printer 4) Tape Drive

Last Answer : 1) Processor

If a printer is to have a resolution of 600 dpi what does its means?

Description : If a printer is to have a resolution of 600 dpi what does its means?

Last Answer : dpi means dots per inch. If you were to print a straight lineone inch long using the max print setting (600 dpi for yourprinter) that line would consist of 600 dots. Fairly high qualityimage

Which portable printer has the highest dpi?

Description : Which portable printer has the highest dpi?

Last Answer : Kodak and HP have the highest dpi and they also offers great prices on printer and photo ink and they offer the most sheets when you are printing your photos.

The appearance of an image on a website is dependent upon? A. The DPI of the printer B. The SPI of the printer C. The PPI of the monitor D. The SPI of the monitor

Description : The appearance of an image on a website is dependent upon? A. The DPI of the printer B. The SPI of the printer C. The PPI of the monitor D. The SPI of the monitor

Last Answer : C. The PPI of the monitor

“Dpi” stands for: (A) Dots per inch (B) Digits per unit (C) Dots pixel inch (D) Diagrams per inch

Description : “Dpi” stands for: (A) Dots per inch (B) Digits per unit (C) Dots pixel inch (D) Diagrams per inch

Last Answer : (A) Dots per inch

What is the unit Kips used to measure speed ?

Description : What is the unit Kips used to measure speed ?

Last Answer : The unit is used to measure the speed of the Kips processor.

Which of the following Unit can be used to measure the speed of a computer? A. BAUD B. SYPS C. MIPS D. None of the Above

Description : Which of the following Unit can be used to measure the speed of a computer? A. BAUD B. SYPS C. MIPS D. None of the Above

Last Answer : C. MIPS

The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is – (1) decibel (2) decimal (3) ppm (4) None of these

Last Answer : (1) decibel Explanation: Noise pollution refers to any unpleasant, damaging or irritating noise that has the potential to harm people, wildlife or the environment. The decibel (dB) is the main unit used ... can also be measured. by its pitch, which is the frequency of sound vibrations per second.

The unit of noise pollution (level) is : (1) decibel (2) decimal (3) ppm (4) None of these

Description : The unit of noise pollution (level) is : (1) decibel (2) decimal (3) ppm (4) None of these 

Last Answer : decibel

How do I fix the DPI scaling on my laptop?

Description : How do I fix the DPI scaling on my laptop?

Last Answer : answer:Wow, so, I tried entering Safe Mode to fix my computer (someone on another site said to try adjust the text size on Safe Mode) and I must've pressed something wrong during the setup I restarted it and ... ll be returning it as soon as possible. I don't know what the hell is going on, but wow.

How do i change the dpi of a jpeg?

Description : How do i change the dpi of a jpeg?

Last Answer : You’re going to lose a lot of quality if you do that; do you not have the original Illustrator/Photoshop file?

Removal of Windows Service Pack 3 has messed up my Screen DPI?

Description : Removal of Windows Service Pack 3 has messed up my Screen DPI?

Last Answer : 1. Start > Control Panel > Display > Settings (tab) 2. Move the Screen Resolution slider to the right as desired. 3. Click OK.

What is the full form of 'DPI' ? -How To ?

Description : What is the full form of 'DPI' ? -How To ?

Last Answer : The full form of 'DPI' is Dubai Ports International

What is the full form of 'DPI' ? -How To ?

Description : What is the full form of 'DPI' ? -How To ?

Last Answer : The full form of 'DPI' is Dot Per Inch, Data Per Inch

What is the full form of 'DPI' ? -How To ?

Description : What is the full form of 'DPI' ? -How To ?

Last Answer : The full form of 'DPI' is Director of Public Instructions

What is the full form of DPI ?

Description : What is the full form of DPI ?

Last Answer : DPI Full Director of Public Instructions.

What is the full form of Dpi ?

Description : What is the full form of Dpi ?

Last Answer : Dpi 's full form Dots Per Inch

What is the full form of DPI ?

Last Answer : DPI - Dots Per Inch

Which of the following has `ppi-dpi` bonding?

Description : Which of the following has `ppi-dpi` bonding?

Last Answer : Which of the following has `ppi-dpi` bonding? A. `NO_(3)^(-)` B. `SO_(3)^(2-)` C. `BO_(3)^(-)` D. `CO_(3)^(-)`

Which of the following has more number of `p pi-dpi` bonds?(all central atoms are in excited states)

Description : Which of the following has more number of `p pi-dpi` bonds?(all central atoms are in excited states)

Last Answer : Which of the following has more number of `p pi-dpi` bonds?(all central atoms are in excited states) A. `SO_(2)` B ... `SO_(3)^(2-)` D. `CO_(3)^(2-)`

Which of the following contains `p pi-dpi` bonds

Description : Which of the following contains `p pi-dpi` bonds

Last Answer : Which of the following contains `p pi-dpi` bonds A. `NO_(2)` B. `SO_(3)` C. `SO_(2)` D. Both 2 and 3

What is the DPI of a Kodak disposable camera?

Description : What is the DPI of a Kodak disposable camera?

Last Answer : The DPI refers to the dots per inch and refers to the image resolution. It is difficult to know what the DPI from photos from disposable cameras is. The scanner however does control the DPI of the scanned photo.

__________ mean diameter of particles is given by Σ (xi /Dpi ⃗) (A) Mass (B) Volume (C) Arithmetic (D) Volume surface

Description : __________ mean diameter of particles is given by Σ (xi /Dpi ⃗) (A) Mass (B) Volume (C) Arithmetic (D) Volume surface

Last Answer : (B) Volume

With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with the developer then wiping with a cloth c) Wipe clean, using a clean cloth soaked in a solvent remover d) it doesn’t matter how it is done as long as all traces of dye are removed

Description : With the DPI method of inspection after the contact time has elapsed the dye should be removed by: a) Spraying the surface with the remover till all dye has gone then wipe with clean cloth b) Spraying with ... remover d) it doesn't matter how it is done as long as all traces of dye are removed

Last Answer : c) Wipe clean, using a clean cloth soaked in a solvent remover

Best for print. A. DPI B. RGB C. CMYK

Description : Best for print. A. DPI B. RGB C. CMYK

Last Answer : B. RGB

Best for on Screen Display A. DPI B. RGB C. CMYK

Description : Best for on Screen Display A. DPI B. RGB C. CMYK

Last Answer : A. DPI

The number of dots of ink or toner per inch on a printed image. A. DPI B. RGB C. CMYK

Description : The number of dots of ink or toner per inch on a printed image. A. DPI B. RGB C. CMYK

Last Answer : B. RGB

What's the average CPM for banner ads?

Description : What's the average CPM for banner ads?

Last Answer : It depends on the traffic. Not only how many, but also if they are recurring or new. Do you know the rate of unique users, in relation to repeats? Most ads I’ve seen cost a few cents per viewing, with an additional charge per click.

Is Cpm software available on the internet?

Description : Is Cpm software available on the internet?

Last Answer : Yes, CPM software is available on the internet. 3d2f.com/tags/cpm/pert/ is a website with free CPM softward downloads. Yes, CPM software is available on the internet. There are many different ... software at different prices. You can look at the various places to see what requirements you need.

Why PERT is preferred over CPM for evaluation of project ?

Description : Why PERT is preferred over CPM for evaluation of project ?

Last Answer : PERT is based on the approach of multiple time estimates for each activity.

For an activity in a CPM analysis, the early Finish time is 13 and the late Finish time is 13. Duration of activity is 6. Which of the following statements is true? A.The early start is 6 B.The duration of the activity is 13 C.The slack of this activity is 13 D.The activity is on the critical path

Description : For an activity in a CPM analysis, the early Finish time is 13 and the late Finish time  is 13. Duration of activity is 6. Which of the following statements is true?  A.The early start is 6 B. ... of the activity is 13  C.The slack of this activity is 13  D.The activity is on the critical path

Last Answer : D.The activity is on the critical path

The particular task performance in CPM is known A.Dummy B.Event C.Activity D.Contract.

Description : The particular task performance in CPM is known  A.Dummy  B.Event  C.Activity  D.Contract.

Last Answer : C.Activity

Which of the following statements is true? A. PERT is considered as a deterministic approach and CPM is a probabilis t ic techniques. B. PERT is considered as a probabilistic techniques and CPM is considered as a deterministic approach. C. PERT and CPM are both probabilistic techniques. D. PERT and CPM are both considered as deterministic approachs

Description : Which of the following statements is true? A. PERT is considered as a deterministic approach and CPM is a probabilis t ic techniques. B. PERT is considered as a probabilistic techniques ... and CPM are both probabilistic techniques. D. PERT and CPM are both considered as deterministic approachs

Last Answer : B. PERT is considered as a probabilistic techniques and CPM is considered as a deterministic approach

Which term is CPM refer to ? 1. Cost per hundred 2. Cost per Million 3. Cost per Thousand 4. Cost per Clic

Description : Which term is CPM refer to ? 1. Cost per hundred 2. Cost per Million 3. Cost per Thousand 4. Cost per Clic

Last Answer : Cost per Million

A continuous passive motion (CPM) device applied after knee surgery a) promotes healing by increasing circulation and movement of the knee joint. A CPM device applied after knee surgery promotes healing by increasing circulation and movement of the knee joint.

Description : A continuous passive motion (CPM) device applied after knee surgery a) promotes healing by increasing circulation and movement of the knee joint. A CPM device applied after knee surgery ... applied after knee surgery promotes healing by increasing circulation and movement of the knee joint.

Last Answer : a) promotes healing by increasing circulation and movement of the knee joint. A CPM device applied after knee surgery promotes healing by increasing circulation and movement of the knee joint.

The basic difference between PERT and CPM is that a. PERT deals with events and CPM with activities b. Critical Path is determined in PERT only c. Costs are considered on CPM only d. Guessed times are used in PERT and evaluated times in CPM.

Description : The basic difference between PERT and CPM is that a. PERT deals with events and CPM with activities b. Critical Path is determined in PERT only c. Costs are considered on CPM only d. Guessed times are used in PERT and evaluated times in CPM.

Last Answer : a. PERT deals with events and CPM with activities

The CPM was developed by Rand and Walker in which year? a. 1957 b. 1958 c. 1959 d. 1960

Description : The CPM was developed by Rand and Walker in which year? a. 1957 b. 1958 c. 1959 d. 1960

Last Answer : a. 1957

What is the benefit of using PERT/CPM network as integral component of project management? a. They furnish a consistent framework for planning, scheduling, monitoring and controlling project b. They illustrate the interdependencies of all tasks c. They can be used to estimate the expected project completion dates as well as the probability that the project will be completed by a specific date d. All of the above

Description : What is the benefit of using PERT/CPM network as integral component of project management? a. They furnish a consistent framework for planning, scheduling, monitoring and controlling project b. They illustrate ... that the project will be completed by a specific date d. All of the above

Last Answer : d. All of the above

CPM is (A) Synthesising in concepts (B) Is built of activities oriented programme (C) Is based on time estimate (D) All the above

Description : CPM is (A) Synthesising in concepts (B) Is built of activities oriented programme (C) Is based on time estimate (D) All the above

Last Answer : (D) All the above

The first method invented for planning projects, was (A) Bar chart method (B) Milestone chart (C) Critical path method (CPM) (D) Programme Evaluation and Review Technique (PERT)

Description : The first method invented for planning projects, was (A) Bar chart method (B) Milestone chart (C) Critical path method (CPM) (D) Programme Evaluation and Review Technique (PERT)

Last Answer : (A) Bar chart method

Completion of an activity on CPM network diagram, is generally known (A) Event (B) Node (C) Connector (D) All the above

Description : Completion of an activity on CPM network diagram, is generally known (A) Event (B) Node (C) Connector (D) All the above

Last Answer : (D) All the above

A CPM family includes (A) CPA (Critical Path Analysis) (B) CPP (Critical Path Plotted) (C) MCE (Minimum Cost Expenditure) (D) All the above

Description : A CPM family includes (A) CPA (Critical Path Analysis) (B) CPP (Critical Path Plotted) (C) MCE (Minimum Cost Expenditure) (D) All the above

Last Answer : (D) All the above

_________ technique helps to make a choice from numerous available alternatives a. PERT b. CPM c. Linear Programming d. Transportation

Description : _________ technique helps to make a choice from numerous available alternatives a. PERT b. CPM c. Linear Programming d. Transportation

Last Answer : d. Transportation

_____ technique is related to Inventory management a. EOQ b. SQC c. CPM d. transportation

Description : _____ technique is related to Inventory management a. EOQ b. SQC c. CPM d. transportation

Last Answer : a. EOQ

________ technique is related to Quality control a. Assignment b. Transportation c. CPM d. SQC

Description : ________ technique is related to Quality control a. Assignment b. Transportation c. CPM d. SQC

Last Answer : d. SQC

_____ are technique applied in project management a. CPM b. Assignment c. Transportation d. Decision theory

Description : ______ are technique applied in project management a. CPM b. Assignment c. Transportation d. Decision theory

Last Answer : a. CPM