Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm of potassium chloride is :

Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm of potassium chloride is :
by

1 Answer

Answer :

Number of moles of CaO required to remove hardness from 1000 litre water having 324 ppm of calcuim bicarbonate and 74.5 ppm ... : A. 8 B. 4 C. 3 D. 2
by
selected by

Related questions

The amount of lime, `Ca(OH)_(2)` required to remove the hardness in 60 L of pond water containing 1.62 mg of calcium bicarbonate per 100 ml of water,

Description : The amount of lime, `Ca(OH)_(2)` required to remove the hardness in 60 L of pond water containing 1.62 mg of calcium bicarbonate per 100 ml of water,

Last Answer : The amount of lime, `Ca(OH)_(2)` required to remove the hardness in 60 L of pond water containing 1.62 mg of ... 0.222g` C. `2.22 g` D. `0.444 g`

Which of the following is responsible for permanent hardness of water? (1) magnesium bicarbonate (2) sodium chloride (3) calcium sulphate (4) calcium bicarbonate

Description : Which of the following is responsible for permanent hardness of water? (1) magnesium bicarbonate (2) sodium chloride (3) calcium sulphate (4) calcium bicarbonate

Last Answer : (3) calcium sulphate Explanation: Permanent hardness is caused by dissolved calcium sulfate (which is not removed by boiling). Hard water contains dissolved magnesium and calcium ions. These make ... . Temporary hardness is caused by dissolved calcium hydrogen carbonate (which is removed by boiling)

Which of the following is responsible for permanent hardness of water ? (1) magnesium bicarbonate (2) sodium chloride (3) calcium sulphate (4) calcium bicarbonate

Description : Which of the following is responsible for permanent hardness of water ? (1) magnesium bicarbonate (2) sodium chloride (3) calcium sulphate (4) calcium bicarbonate

Last Answer : calcium sulphate 

The presence of which of the following salts in water causes corrosion in steam boilers? (1) Sodium Chloride (2) Magnesium Chloride (3) Calcium bicarbonate (4) Potassium bicarbonate

Description : The presence of which of the following salts in water causes corrosion in steam boilers? (1) Sodium Chloride (2) Magnesium Chloride (3) Calcium bicarbonate (4) Potassium bicarbonate

Last Answer : (2) Magnesium Chloride Explanation: Magnesium chloride is the name for the chemical compound with the formula MgCl2 and its various hydrates MgCl2(H2O)x. These salts are typical ionic halides, being highly soluble in water.

Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Description : Solvay process is not used for the manufacture of potassium carbonate, because of the reason that potassium bicarbonate (A) Is prone to thermal decomposition (B) Has high water solubility and is unstable (C) Is soluble in ammonium chloride and potassium chloride solution (D) All (A), (B) and (C)

Last Answer : (C) Is soluble in ammonium chloride and potassium chloride solution

How do you prepare 1000 ppm chloride solution from NaCl?

Description : How do you prepare 1000 ppm chloride solution from NaCl?

Last Answer : What volume of this solution do you desire? Let's say you wantto make 1 liter of such a solution. You would weigh out 1 gram(1000 mg) of NaCl and dissolve it in enough water to make a ... 1000 mg/liter,this is how you make 1 liter of that solution. For larger orsmaller volumes, adjust appropriately.

Anion gap is the difference in the plasma concentrations of (A) (Chloride) – (Bicarbonate) (B) (Sodium) – (Chloride) (C) (Sodium + Potassium) – (Chloride + Bicarbonate) (D) (Sum of cations) – (Sum of anions)

Description : Anion gap is the difference in the plasma concentrations of (A) (Chloride) – (Bicarbonate) (B) (Sodium) – (Chloride) (C) (Sodium + Potassium) – (Chloride + Bicarbonate) (D) (Sum of cations) – (Sum of anions)

Last Answer : Answer : C

Recurrent vomiting leads to loss of (A) Potassium (B) Chloride (C) Bicarbonate (D) All of these

Description : Recurrent vomiting leads to loss of (A) Potassium (B) Chloride (C) Bicarbonate (D) All of these

Last Answer : Answer : B

Mineralocorticoids increase the tubular secretion of (A) Sodium (B) Potassium (C) Chloride (D) Bicarbonate

Description : Mineralocorticoids increase the tubular secretion of (A) Sodium (B) Potassium (C) Chloride (D) Bicarbonate

Last Answer : Answer : B

Concentration of the following is higher in intracellular fluid than in extracellular fluid: (A) Sodium (B) Potassium (C) Chloride (D) Bicarbonate

Description : Concentration of the following is higher in intracellular fluid than in extracellular fluid: (A) Sodium (B) Potassium (C) Chloride (D) Bicarbonate

Last Answer : Answer : B

The ion which activates salivary amylase activity is (A) Chloride (B) Bicarbonate (C) Sodium (D) Potassium

Description : The ion which activates salivary amylase activity is (A) Chloride (B) Bicarbonate (C) Sodium (D) Potassium

Last Answer : Answer : A

Which of the following electrolytes is a major cation in body fluid? a) Potassium Potassium is a major cation that affects cardiac muscle functioning. b) Chloride Chloride is an anion. c) Bicarbonate Bicarbonate is an anion. d) Phosphate Phosphate is an anion.

Description : Which of the following electrolytes is a major cation in body fluid? a) Potassium Potassium is a major cation that affects cardiac muscle functioning. b) Chloride Chloride is an anion. c) Bicarbonate Bicarbonate is an anion. d) Phosphate Phosphate is an anion.

Last Answer : a) Potassium Potassium is a major cation that affects cardiac muscle functioning.

component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Description : component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Last Answer : D. Sodium bicarbonate

Which of the following measures is not an essential component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Description : Which of the following measures is not an essential component of the management of moderately severe diabetic ketoacidosis: A. Insulin B. Intravenous fluids C. Potassium chloride D. Sodium bicarbonate

Last Answer : . Sodium bicarbonate

In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the same volume.(A) More than(B) Less than(C) Same as(D) Data insufficient; can't be predicted

Description : In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the ... (A) More than (B) Less than (C) Same as (D) Data insufficient; can't be predicted

Last Answer : (C) Same as

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

Harish buys petrol at rs 21, Rs.24 and Rs.27 per litre for 3 successive years. What approximately is the average cost per litre of petrol if he spends Rs.12000 each year? A) 23.74 B) 54.76 C) 24.66 D) 28.99

Description : Harish buys petrol at rs 21, Rs.24 and Rs.27 per litre for 3 successive years. What approximately is the average cost per litre of petrol if he spends Rs.12000 each year? A) 23.74 B) 54.76 C) 24.66 D) 28.99

Last Answer : A)  Total quantity of petrol consumed in 3 yr = (12000/21 +12000/24+12000/27) =12000(1/2 + 1/24 + 1/27) =12000(72+63+56/1512) =12000(191/1512) =(2292000/1512)litres Total amount spent = rs(3 *12000) = Rs.36000 Average cost = Rs(36000*1512/2292000) =Rs.23.74

The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Description : The tensile force required to cause an elongation of 0.045 mm in a steel rod of 1000 mm length and 12 mm diameter, is (where E = 2 × 106 kg/cm2 ) (A) 166 kg (B) 102 kg (C) 204 kg (D) 74 kg

Last Answer : (B) 102 kg

Pick up the correct statement from the following: (A) Water with hardness upto 75 ppm is considered soft (B) Water with hardness more than 200 ppm is considered hard (C) Water needed for laundries should contain hardness less than 75 ppm (D) All the above

Description : Pick up the correct statement from the following:  (A) Water with hardness upto 75 ppm is considered soft  (B) Water with hardness more than 200 ppm is considered hard  (C) Water needed for laundries should contain hardness less than 75 ppm  (D) All the above 

Last Answer : (D) All the above 

Molarity is defined as the number of gm moles of solute per __________ of solvent. (A) Litre (B) kg (C) gm (D) c.c

Description : Molarity is defined as the number of gm moles of solute per __________ of solvent. (A) Litre (B) kg (C) gm (D) c.c

Last Answer : (A) Litre

Molality is defined as the number of gm moles of solute per __________ of solvent. (A) Litre (B) gm (C) Kg (D) m

Description : Molality is defined as the number of gm moles of solute per __________ of solvent. (A) Litre (B) gm (C) Kg (D) m

Last Answer : (C) Kg

One degree of hardness of water means a content of salts of (A) 10.25 mg/litre (B) 12.25 mg/litre (C) 14.25 mg/litre (D) 16.25 mg/litre

Description : One degree of hardness of water means a content of salts of  (A) 10.25 mg/litre  (B) 12.25 mg/litre  (C) 14.25 mg/litre  (D) 16.25 mg/litre

Last Answer : (C) 14.25 mg/litre 

The maximum permissible hardness for public supplies is (A) 95 mg/litre (B) 105 mg/litre (C) 115 mg/litre(D) 125 mg/litre

Description : The maximum permissible hardness for public supplies is  (A) 95 mg/litre  (B) 105 mg/litre  (C) 115 mg/litre (D) 125 mg/litre

Last Answer : (C) 115 mg/litre

What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Description : What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Last Answer : (A) Litre/mole.second

For the reversible reaction A ⇌ 2B, if the equilibrium constant K is 0.05 mole/litre; starting from initially 2 moles of A and zero moles of B, how many moles will be formed at equilibrium? (A) 0.253 (B) 0.338 (C) 0.152 (D) 0.637

Description : For the reversible reaction A ⇌ 2B, if the equilibrium constant K is 0.05 mole/litre; starting from initially 2 moles of A and zero moles of B, how many moles will be formed at equilibrium? (A) 0.253 (B) 0.338 (C) 0.152 (D) 0.637

Last Answer : (B) 0.338

Concentration of the limiting reactant (with initial concentration of a moles/litre) after time t is (a-x). Then 't' for a first order reaction is given by (A) k. t = ln a/(a - x) (B) k. t = x/a (a - x) (C) k. t = ln (a - x)/a (D) k. t = ln a (a - x)/x

Description : Concentration of the limiting reactant (with initial concentration of a moles/litre) after time t is (a-x). Then 't' for a first order reaction is given by (A) k. t = ln a/(a - x) (B) k. t = x/a (a - x) (C) k. t = ln (a - x)/a (D) k. t = ln a (a - x)/x

Last Answer : (A) k. t = ln a/(a - x)

By boiling water, hardness can be removed if it is due to (A) Calcium sulphate (B) Magnesium sulphate (C) Calcium nitrate (D) Calcium bicarbonate

Description : By boiling water, hardness can be removed if it is due to  (A) Calcium sulphate  (B) Magnesium sulphate  (C) Calcium nitrate  (D) Calcium bicarbonate 

Last Answer : (D) Calcium bicarbonate 

Assuming that the disk head is located initially at 32, find the number of disk moves required with FCFS if the disk queue of I/O block requests are 98, 37, 14, 124, 65, 67: (A) 310 (B) 324 (C) 320 (D) 321

Description : Assuming that the disk head is located initially at 32, find the number of disk moves required with FCFS if the disk queue of I/O block requests are 98, 37, 14, 124, 65, 67: (A) 310 (B) 324 (C) 320 (D) 321

Last Answer : (D) 321

The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Description : The chloride content of treated water for public supplies should not exceed (A) 100 ppm (B) 150 ppm (C) 200 ppm (D) 250 ppm

Last Answer : (D) 250 ppm

Pick out the correct statement. (A) Chemical oxygen demand (COD) is a measure of chemically oxidisable organic matter present in water (B) COD is determined by oxidising the organic matter present in water with potassium dichromate in cone, sulphuric acid solution at boiling temperature for specified time (C) COD is related to BOD of a given waste in water but the relationship varies for different wastes. Typically COD of potable water may be 1-2 mg/litre (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) Chemical oxygen demand (COD) is a measure of chemically oxidisable organic matter present in water (B) COD is determined by oxidising the organic matter present in water with potassium dichromate ... of potable water may be 1-2 mg/litre (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Description : For existence of aquatic life in water, the dissolved oxygen content in it, should not be less than __________ ppm. (A) 10000 (B) 5 (C) 500 (D) 1000

Last Answer : (B) 5

74.5 g of a metallic chloride contains 35.5 g of chlorine. The equivalent weight of the metal is [CPMT 1986] (A) 19.5 (B) 35.5 (C) 39.0 (D) 78.0

Description : 74.5 g of a metallic chloride contains 35.5 g of chlorine. The equivalent weight of the metal is [CPMT 1986] (A) 19.5 (B) 35.5 (C) 39.0 (D) 78.0

Last Answer : (C) 39.0

The number of water molecules in 1 litre of water is [EAMCET 1990] (A) 18 (B) 18× 1000 (C) NA (D) 55.55 NA

Description : The number of water molecules in 1 litre of water is [EAMCET 1990] (A) 18 (B) 18× 1000 (C) NA (D) 55.55 NA

Last Answer : (D) 55.55 NA

Sodium chloride content in sea water is about __________ gms/litre. (A) 2 (B) 10 (C) 25 (D) 50

Description : Sodium chloride content in sea water is about __________ gms/litre. (A) 2 (B) 10 (C) 25 (D) 50

Last Answer : (C) 25

1.12 litre dry chlorine gas at STP was passed over a heated metal when 5.56 g of chloride of the metal was formed. What is the equivalent weight of th

Description : 1.12 litre dry chlorine gas at STP was passed over a heated metal when 5.56 g of chloride of the metal was formed. What is the equivalent weight of th

Last Answer : 1.12 litre dry chlorine gas at STP was passed over a heated metal when 5.56 g of chloride of ... formed. What is the equivalent weight of the metal ?

What is the concentration of solution in ppm if 2 kg of 2,4-D is mixed with 1000 lit of water?

Description : What is the concentration of solution in ppm if 2 kg of 2,4-D is mixed with 1000 lit of water?

Last Answer : Ans.2000

Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Description : Maximum permissible turbidity in potable water is __________ ppm. (A) 1 (B) 10 (C) 250 (D) 1000

Last Answer : (B) 10

The permissible color for domestic water supply is __________ ppm.(A) 1 (B) 20 (C) 100 (D) 1000

Description : The permissible color for domestic water supply is __________ ppm. (A) 1 (B) 20 (C) 100 (D) 1000

Last Answer : (B) 20

Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Description : Threshold Limit Value (TLV) is the maximum allowable concentration (i.e. safe limit) of pollutants in air. Safe limit for SO2 in air is __________ ppm. (A) 5 (B) 500 (C) 1000 (D) 2000

Last Answer : (A) 5

TLV of ammonia, nitrogen dioxide and phenol vapor in air is __________ ppm. (A) 5 (B) 100 (C) 1000 (D) 2000

Description : TLV of ammonia, nitrogen dioxide and phenol vapor in air is __________ ppm. (A) 5 (B) 100 (C) 1000 (D) 2000

Last Answer : (A) 5

A 19 year-old female is referred following a visit to the dentist where marked erosion of her teeth was noted. She was entirely asymptomatic and her only medication was the oral contraceptive pill. On examination her blood pressure was 110/70 mmHg and her body mass index was 21.5 kg/m2 (18 - 25). Investigations sodium 135 mmol/l potassium 2.1 mmol/l bicarbonate 42 mmol/l urea 2.6 mol/L corrected calcium 2.08 mmol/ alkaline phosphatase 201 iu/l (50-110) What is the most likely diagnosis? 1) Bulimia nervosa 2) Conn's syndrome 3) Laxative abuse 4) Pregnancy 5) Primary hypoparathyroidism

Description : A 19 year-old female is referred following a visit to the dentist where marked erosion of her teeth was noted. She was entirely asymptomatic and her only medication was the oral contraceptive pill ... ) Bulimia nervosa 2) Conn's syndrome 3) Laxative abuse 4) Pregnancy 5) Primary hypoparathyroidism

Last Answer : Answers-5 This patient has tooth erosion associated with hypokalaemic metabolic alkalosis and hypocalcaemia. This suggests a diagnosis of hypoparathyroidism. Conn's is unlikely in this age group, is ... raised alkaline phosphatase would not be expected. Early pregnancy would not fit this picture.

Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Description : Particle size range in which dust catcher (gravity settling chamber) works most effectively and efficiently is __________ microns. (A) < 5 (B) 10 to 25 (C) < 74 (D) > 1000

Last Answer : (C) < 74

74. Inverter tech AC if usage of AC is more than 1000 hour in a year and per unit cost of electricity is more than rs _________per unit. a) 10 c) 5 b) 7 d) 4

Description : 74. Inverter tech AC if usage of AC is more than 1000 hour in a year and per unit cost of electricity is more than rs _________per unit. a) 10 c) 5 b) 7 d) 4

Last Answer : 5

Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000

Description : Tolerable concentration of toxic carbon monoxide in atmospheric air is about __________ ppm. (A) 50 (B) 1000 (C) 5000 (D) 10000

Last Answer : (A) 50

TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100(D) 1000

Description : TLV of ozone (O3 ) and phosgene (COCl2 ) in air is __________ ppm. (A) 0.1 (B) 25 (C) 100 (D) 1000

Last Answer : (A) 0.1

Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Description : Maximum allowable concentration of CO2 in air for safe working is __________ ppm (parts per million). (A) 50 (B) 1000 (C) 2000 (D) 5000

Last Answer : (D) 5000

A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Description : A gas is termed as non-toxic, if its maximum permissible concentration (TLV) ranges from __________ ppm. (A) 1000 to 2000 (B) 3000 to 6000 (C) 6000 to 9000 (D) 10000 to 100000

Last Answer : (D) 10000 to 100000

Permissible safe limit (TLV) of __________ toxic gas is 100-1000 parts per million (ppm). (A) Highly (B) Moderately (C) Extremely (D) Very extremely

Description : Permissible safe limit (TLV) of __________ toxic gas is 100-1000 parts per million (ppm). (A) Highly (B) Moderately (C) Extremely (D) Very extremely

Last Answer : (B) Moderately

Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Description : Threshold limit value (TLV) i.e., the maximum permissible safe limit of phosgene gas which Hitler used to use to kill his enemies in 'gas chamber' is about __________ ppm. (A) < 1 (B) 10-100 (C) 100-200 (D) 100-1000

Last Answer : (A) < 1

If carbon monoxide content in atmospheric air exceeds __________ ppm, death is bound to occur. (A) 50 (B) 500 (C) 1000 (D) 3000 (i.e. 0.3%

Description : If carbon monoxide content in atmospheric air exceeds __________ ppm, death is bound to occur. (A) 50 (B) 500 (C) 1000 (D) 3000 (i.e. 0.3%

Last Answer : (D) 3000 (i.e. 0.3%