Description : A flow in which the viscosity of fluid is dominating over the inertia force is called (A) Steady flow (B) Unsteady flow (C) Laminar flow (D) Turbulent flow
Last Answer : Answer: Option C
Description : The ratio of the inertia force to the __________ is called Euler's number. (A) Pressure force (B) Elastic force (C) Surface tension force (D) Viscous force
Last Answer : Answer: Option A
Description : Reynold's number is the ratio of the inertia force to the (A) Surface tension force (B) Viscous force (C) Gravity force (D) Elastic force
Last Answer : Answer: Option B
Description : Select the correct statement (A) Weber's number is the ratio of inertia force to elastic force. (B) Weber's number is the ratio of gravity force to surface tension force. (C) Weber's number ... force to pressure force. (D) Weber's number is the ratio of inertia force to surface tension force.
Last Answer : Answer: Option D
Description : Weber number is the ratio of inertial force to __________ force. (A) Surface tension (B) Gravity (C) Viscous (D) Elastic
Last Answer : (A) Surface tension
Description : Power consumption during turbulent flow in agitation tank is proportional to the __________ of the liquid. (A) Viscosity (B) Thermal conductivity (C) Surface tension (D) Density
Last Answer : (D) Density
Description : Froude's number is the ratio of inertia force to (A) Pressure force (B) Elastic force (C) Gravity force (D) Surface tension force
Description : Mach number is important in a fluid flow problem, when the inertia and __________ forces predominate. (A) Elastic (B) Viscous (C) Gravity (D) None of these
Last Answer : (A) Elastic
Last Answer : A) Elastic
Description : Reynold's number is the ratio of inertia force to (A) Pressure force (B) Elastic force (C) Gravity force (D) Viscous force
Description : Euler number is defined as the ratio of inertia force to __________ force. (A) Pressure (B) Elastic (C) Gravity (D) Viscous
Last Answer : (A) Pressure
Description : If Reynolds number is greater than 1, then the (A) Viscous force is larger than the inertia force (B) Inertia force is larger than the viscous force (C) Inertia force is larger than the surface tension force (D) Inertia force is larger than the gravitational force
Last Answer : (B) Inertia force is larger than the viscous force
Description : Pick out the wrong statement. (A) The form drag is dependent upon the occurrence of a wake (B) The shear stress at any given cross-section of a pipe for steady flow (either laminar or turbulent ... of viscosity (D) Existence of the boundary layer in fluid flow is because of viscosity of the fluid
Last Answer : (C) An ideal fluid is the one, which has negligible surface tension and obeys the Newton's law of viscosity
Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes
Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution
Description : Viscous force is the __________ of shear stress due to viscosity and cross-section area of flow. (A) Sum (B) Different (C) Product (D) Ratio
Description : Euler's number is the ratio of __________ force to pressure force. (A) Inertia (B) Gravity (C) Viscous (D) None of these
Description : Navier-Stokes equation is useful in the analysis of __________ fluid flow problems. (A) Non-viscous (B) Viscous (C) Turbulent (D) Rotational
Last Answer : (B) Viscous
Description : 07. The ratio of the inertia force to the surface tension force is called Weber's number. A) Correct B) Incorrect
Last Answer : A
Description : The product of mass and acceleration of flowing liquid is called (A) Inertia force (B) Viscous force (C) Gravity force (D) Pressure force
Description : The ratio of the inertia force to the viscous force is called (A) Reynold's number (B) Froude's number (C) Weber's number (D) Euler's number
Description : The force present in a moving liquid is (A) Inertia force (B) Viscous force (C) Gravity force (D) All of these
Description : Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces (B) A hydrometer used for the determination of ... Turbulent fluid flow is characterised by the rapid fluctuation of instantaneous pressure & velocity at a poin
Last Answer : (C) In case of unsteady fluid flow, the velocity at any given point does not change with time
Description : The force per unit length is the unit of (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity
Description : Free surface of a liquid tends to contract to the smallest possible area due to force of (A) Surface tension (B) Viscosity (C) Friction (D) Cohesion
Description : For similarity, in addition to models being geometrically similar to prototype, the following in both cases should also be equal (A) Ratio of inertial force to force due to viscosity (B) ... the four ratios of inertial force to force due to viscosity, gravitation, surface tension, and elasticity
Description : Which one of the following statements is correct ? a) For water at 100o Celsius at sea level, the vapour pressure is equal to atmospheric pressure b) Surface energy (or tension) is caused by ... it both in static and in dynamic conditions d) Air is 50,000 times more compressible than water
Last Answer : c) Viscosity of a fluid is the property exhibited by it both in static and in dynamic conditions
Description : When the pipe Reynold's number is 6000, the flow is generally (A) Viscous (B) Laminar (C) Turbulent (D) Transition
Last Answer : (C) Turbulent
Description : Pick out the wrong statement pertaining to fluid flow. (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5 (B) The Newtonian ... at the centre of the pipe (C) Navier-Stokes equation is applicable to the analysis of viscous flows
Last Answer : (A) The ratio of average velocity to the maximum velocity for turbulent flow of Newtonian fluid in circular pipes is 0.5
Description : Which of the fluid forces are not considered in the Reynold's equation of flow? (A) Viscous forces (B) Turbulent forces (C) Pressure forces (D) Compressibility forces
Last Answer : (D) Compressibility forces
Description : Turbulent flow generally occurs for cases involving (A) Highly viscous fluid (B) Very narrow passages (C) Very slow motion (D) None of these
Last Answer : (D) None of these
Description : Lead ball falls through water more slowly than through air because A. The value of ‘g’ is less in water B. Density of air is less than that of water C. Of the viscous force in water D. Of the surface tension of water
Last Answer : ANSWER: C
Description : Which of the following forces does not act on a fluid at rest? (A) Viscous force (B) Gravity force (C) Hydrostatic force (D) Surface tension force
Last Answer : (A) Viscous force
Description : Rain drops falling through atmospheric air attain limited terminal velocity, because of (A) Upward thrust due to air (B) Viscous force exerted by air (C) Surface tension effects of water (D) Force of gravity
Last Answer : Option B
Description : _________ fluid force is not considered in the Navier-Stokes equation. (A) Turbulent (B) Viscous (C) Gravity (D) Pressure
Last Answer : (A) Turbulent
Description : The ratio of the inertia force to the elastic force is called (A) Reynold's number (B) Froude's number (C) Weber's number (D) Mach number
Description : Ratio of inertia force to elastic force is known as (A) Mach number (B) Froude number (C) Reynolds number (D) Weber's number
Description : Practical fluids (A) Are viscous (B) Possess surface tension (C) Are compressible (D) Possess all the above properties
Description : The pressure co-efficient is the ratio of pressure forces to __________ forces. (A) Viscous (B) Inertial (C) Gravity (D) Surface tension
Last Answer : (A) Viscous
Description : The fluid forces considered in the Navier Stokes equation are (A) Gravity, pressure and viscous (B) Gravity, pressure and turbulent (C) Pressure, viscous and turbulent (D) Gravity, viscous and turbulent
Description : Which of the following pair will have identical dimensions? a.Pressure and surface tension b.Work and kinetic energy c.Momentum and force d.Moment of inertia and angular momentum e.None of the above
Last Answer : c. Momentum and force
Description : The property of a liquid which offers resistance to the movement of one layer of liquid over another adjacent layer of liquid, is called (A) Surface tension (B) Compressibility (C) Capillarity (D) Viscosity
Description : Ail oil drop spreads over water because (1) oil is lighter than water (2) oil is more viscous (3) oil does not mix with water (4) surface tension of oil is much smaller than that of water
Last Answer : (4) surface tension of oil is much smaller than that of water Explanation: Surface tension is a contractive tendency of the surface of a liquid that allows it to resist an external force. It is ... is caused by cohesion of similar molecules, and is responsible for many of the behaviors of liquids.
Description : An oil drop spreads over water because (1) oil is lighter than water (2) oil is more viscous (3) oil does not mix with water (4) surface tension of oil is much smaller than that of water
Last Answer : surface tension of oil is much smaller than that of water
Description : Existence of boundary layer in fluid flow is because of the (A) Surface tension (B) Fluid density (C) Fluid viscosity (D) Gravity forces
Last Answer : (C) Fluid viscosity
Description : Which of the following is the term used for the resistance of a liquid system to flow? w) surface tension x) diffusion y) viscosity
Last Answer : ANSWER: Y -- VISCOSITY
Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies
Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis
Description : Pick out the wrong statement: (A) Greater is the kinematic viscosity of the liquid, greater is the thickness of the boundary layer (B) Blowers develop a maximum pressure of 2 atmospheres ( ... factor in case of turbulent flow of liquids in pipe depends upon relative roughness & Reynolds number
Last Answer : (C) Friction losses in pipe fittings are generally expressed in terms of velocity heads
Description : A liquid disturbed by stirring comes to rest due to – (1) density (2) surface tension (3) viscosity (4) centripetal force
Last Answer : (3) viscosity Explanation: It happens because of viscosity. The viscosity of a fluid is a measure of its resistance to gradual deformation by shear stress or tensile stress. It is due to friction between neighboring parcels of the fluid that are moving at different velocities.
Description : A needle or a pin floats on the surface of water because of – (1) Surface tension (2) Surface energy (3) Viscosity (4) Adhesive force
Last Answer : (1) Surface tension Explanation: The pin or needle floats because of an invisible elastic skin on the surface of the water. This elastic skin is called surface tension. Surface tension of the water leads to forces strong enough to support the needle's weight.
Description : Ball pen functions on the principle of : (1) Viscosity (2) Boyle's Law (3) Gravitational force (4) Surface tension
Last Answer : (4) Surface tension Explanation: The ballpoint pen is one of the most simple and yet ubiquitous devices whose function depends on surface tension. With a pen held upright, gravity and surface tension act in concert to get ink onto the ball.