Give the properties and application of following materials :i) mica ii) rubber

Give the properties and application of following materials :i) mica ii) rubber
by

1 Answer

Answer :

i) Mica: Properties of Mica: 

1. It has very high resistance 2. It is heat resistant, moisture resistant, it has good elasticity and is fire proof 3. It retains its electrical and mechanical properties even at very high temperature. 


Applications of Mica: 1. It is used in commutator, insulators in electric heating units. 2. It is used for binding armature winding . 3. Mica papers are used in rotor winding, turbo generator ii) Rubber: 


Properties of Rubber: 1. Rubber is moisture repellent and possesses good insulating properties. 2. Its specific resistance around is 1017 ohm/cm 3. Vulcanized rubber is more resistant, mechanically strong and tough, elastic and can withstands high temperature. 4. It can be affected chemically. 5. It has low heat resistance. 


Applications of Rubber: 1. It is extensively used as insulation on wires, cables etc.

by

Related questions

Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Description : Which of the following is not a dielectric material? (A) Cotton, silk and paper (B) Asbestos, glass, porcelain and mica (C) Rubber and polymeric resins (D) All refractory materials

Last Answer : Option C

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

Which of the following are bad conductors of electricity? (1) Mica and Quartz (2) Metals and Rubber (3) Metals and Mica (4) Mica and Rubber

Description : Which of the following are bad conductors of electricity? (1) Mica and Quartz (2) Metals and Rubber (3) Metals and Mica (4) Mica and Rubber

Last Answer : (1) Mica and Quartz Explanation: Metals are good conductors of electricity, because they have free electrons. Micaand quartz are examples of insulators (bad conductors of electricity), they don't have free electrons.

Which of the following is a good conductor of heat but a bad conductor of electricity? (1) Celluloid (2) Rubber (3) Asbestos (4) Mica

Description : Which of the following is a good conductor of heat but a bad conductor of electricity? (1) Celluloid (2) Rubber (3) Asbestos (4) Mica

Last Answer : (4) Mica Explanation: Good conductors of heat are good conductors of electricity. Mica is an exception which although being a good conductor of heat and a bad conductor of electricity. It is commonly ... to assist in the transfer of the generated heat to the heat sink or chassis for dissipation.

Which of the following comprises of hydrocarbons? (A) Mica flakes (B) Glass (C) Rubber (D) None of these

Description : Which of the following comprises of hydrocarbons? (A) Mica flakes (B) Glass (C) Rubber (D) None of these

Last Answer : (C) Rubber

Cables for 220 kV lines are invariably (a) mica insulated (b) paper insulated (c) compressed oil or compressed gas insulated (d) rubber insulated (e) none of the above

Description : Cables for 220 kV lines are invariably (a) mica insulated (b) paper insulated (c) compressed oil or compressed gas insulated (d) rubber insulated (e) none of the above

Last Answer : (c) compressed oil or compressed gas insulated

Which of the following is a good conductor of heat but a bad conductor of electricity ? (1) Celluloid (2) Rubber (3) Asbestos (4) Mica

Description : Which of the following is a good conductor of heat but a bad conductor of electricity ? (1) Celluloid (2) Rubber (3) Asbestos (4) Mica

Last Answer : Mica

Mention three properties of mica. -SST 10th

Description : Mention three properties of mica. -SST 10th

Last Answer : (i) Mica is a mineral made up of a series of plates or leaves. (ii) It splits easily into thin sheets. These sheets can be so thin that a thousand can be layered into ... properties and resistance to high voltage, mica is considered an important mineral used in electric and electronic industries.

What is mica special properties?

Description : What is mica special properties?

Last Answer : Feel Free to Answer

The Vindhyan system of rocks is important for the production of [CDS 2011] (a) precious stones and building materials (b) iron ore and manganese (c) bauxite and mica (d) copper and uranium

Description : The Vindhyan system of rocks is important for the production of [CDS 2011] (a) precious stones and building materials (b) iron ore and manganese (c) bauxite and mica (d) copper and uranium

Last Answer : Ans: (a)

Which of the listed pairs of materials make the best insulators? A. copper and aluminum B. glass and mica C. dry air and a vacuum D. doped silicon and germanium

Description : Which of the listed pairs of materials make the best insulators? A. copper and aluminum B. glass and mica C. dry air and a vacuum D. doped silicon and germanium

Last Answer : Answer: B

Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Description : Which of the listed groups of electrical insulation materials is best suited for the highest operating temperatures? A. impregnated cotton and silk B. unimpregnated paper and cotton C. pure glass and quartz D. mica and porcelain with bonding agents

Last Answer : Answer: C

Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the(A) Blake jaw crusher(B) Cage mill(C) Stamp mill(D) Bradford's breaker

Description : Size reduction of fibrous materials like wood, asbestos, mica etc. is done by a disintegrator exemplified by the (A) Blake jaw crusher (B) Cage mill (C) Stamp mill (D) Bradford's breaker

Last Answer : (B) Cage mill

Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Description : Ceramic materials (A) Are exemplified by clay and mica (B) Are poor electrical conductors due to lack of free electrons (C) Never exhibit polymorphism (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

State the application of following materials : i) CRGO Silicon Steel ii) HRGO Silicon Steel iii) Amorphous metal iv) Bronze

Description : State the application of following materials : i) CRGO Silicon Steel ii) HRGO Silicon Steel iii) Amorphous metal iv) Bronze 

Last Answer : Applications of CRGO Silicon Steel: 1) Manufacturing distribution and power transformer cores. 2) Manufacturing cores of audio transformers, ballast transformers, specialty transformers. 3) Manufacturing cores ... used. 5) Cadmium bronze is used for making commutator segments and contact wires. 

Give four properties and its related applications of rubber

Description : Give four properties and its related applications of rubber  

Last Answer : Properties of rubber Related application  1. Elasticity  For preparation of rubber bands, balloons, tubes for all vehicles  2 .High abrasion resistance For preparation of tyres of all ... air pillows, cushions, mattresses.  9 .Waterproof For preparation of rain coats. 

Give the composition, properties and application of Babbit metal.

Description : Give the composition, properties and application of Babbit metal. 

Last Answer : Composition: Sn = 88% Sb = 8% Cu =4%  Properties: i) It is silvery white, soft metal alloy. ii) It has very low coefficient of friction. iii) It has very high corrosion and wear and tear ... used for making engine bearing. ii) It is also used as a common bearing metal in cast iron boxes. 

Give classification of insulating materials on the basis of state of material and give one application of each.

Description : Give classification of insulating materials on the basis of state of material and give one application of each.

Last Answer : Classification of Insulating material State of material   Application Solid insulating materials Wood, rubber, plastic, PVC, glass, porcelain, mica, Polypropylene film etc.   ... Switchgears, gas pressures cables, circuit breakers, generator cooling systems and X-ray apparatus

State properties of insulating materials.

Description : State properties of insulating materials.

Last Answer : (i) Resistivity should be very high. (ii) It should be water resistant. (iii) It should not contain impurities. (iv) It should not be affected chemically and not corroded easily. (v) Its ... It should be mechanically strong (tensile strength should be more). (vii) It should not be porous.

Explain the materials used in wearable antennas with their properties

Description : Explain the materials used in wearable antennas with their properties

Last Answer : 1. The Substrate:   The fabric textile material to be used should have more dielectric permittivity. o Low dielectric constant o Nominal thickness value. o Low moisture content of fabric. ... . Conducting material having low and stable electrical resistance, flexible in nature eg.: Copper, Nickel 

Explain the mechanical properties of insulating materials.

Description : Explain the mechanical properties of insulating materials.

Last Answer : i) Mechanical strength: Mechanical strength depends on temperature and humidity. a) Temperature: High temperature badly affects the mechanical strength of insulating material. While selecting material ... material should have property of easy moulding and machined into required shape and size.

State any four properties of conducting materials.

Description : State any four properties of conducting materials.

Last Answer : Electrical properties of conductivity materials: i) Low resistivity. ii) Low temperature coefficient of resistance. iii) High conductivity. iv) Low heat dissipation.  Mechanical properties of ... properties of conductivity materials: i) Adequate resistant to corrosion. ii) Low oxidation. 

List the basic types of rubber. Give one application of each.

Description : List the basic types of rubber. Give one application of each. 

Last Answer : Basic types of rubber with application  A) Natural rubber Applications :- 1) Belts, 2. Shoe, 3. Coatings, 4. Packaging, 5. Soles, 6. Automobile tyres, 7. Seals and gaskets, 8. Chemical ... 7. Tubeless tire liners, Inner tubes 8. Stoppers for glass bottles, 9. Medicine bottles, and pharmaceuticals 

What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Description : What Properties Are Needed To Be Considered For Application Calling For Following Requirements? I) Rigidity. Ii) Strength Of No Plastic Deformation Under Static Load. Iii) Strength To Withstand Overload Without Fracture.

Last Answer : i) Reliability – elastic modulus and yield strength. ii) Strength (for no plastic deformation under static loading) – yield point. iii) Strength (overload) – Toughness and impact resistance. iv) Wear resistance – Hardness. v) Reliability and safety – Endurance limit and yield.

Classify plastic materials into two categories, describe their important properties and give two examples of each.

Description : Classify plastic materials into two categories, describe their important properties and give two examples of each.

Last Answer : Ans: Plastic materials can be classified into thermoplastic and thermosetting plastics. Thermoplastic materials:- The properties of these plastic materials do not change considerably if they are melted ... forming elastic threads and films. Examples are Phenol formaldehyde (Bakelite), Epoxy resins.

Give properties and uses of ceramic materials in construction.

Description : Give properties and uses of ceramic materials in construction.

Last Answer : Properties: 1. It is hard. 2. It is bristle. 3. It is in the form of amorphous (non-crystalline) 4. The structure is glassy. 5. It is insulator thermally & electrically. 6. It is ... porcelain. 6. For making POP. 7. For making electric. 8. For Manufacturing of sanitary wares, pavers. 

Give any two properties of area and also raw materials used for urea.

Description : Give any two properties of area and also raw materials used for urea.

Last Answer : Properties of urea M.P 133 oC MW 60 Soluble in water Non toxic Non flammable Raw materials: 1.Carbon dioxide 2.Ammonia

Write four properties of Ceramic Materials and give it’s applications in automobile industry.

Description : Write four properties of Ceramic Materials and give it’s applications in automobile industry.

Last Answer : Properties of Ceramic Material: i. Inorganic & non -metallic material. ii. Brittle material. iii. Insulation to flow of electric current iv. Withstand high temperature. v. Rock like appearance vi. Hardness ... mica etc. 7. In I.C. engines and turbines as armor plates. 8. In cutting tools 

What happens to the capacitance if mica is inserted between the plates of an air capacitor?

Description : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Last Answer : What happens to the capacitance if mica is inserted between the plates of an air capacitor? A) The capacitance increases B) The capacitance decreases C) The capacitance remains the same D) The capacitance becomes zero

Heating rubber with sulphur for the bet- terment of its properties ike tensile steqasbh: hardness; elasticity etc. is called as?

Description : Heating rubber with sulphur for the bet- terment of its properties ike tensile steqasbh: hardness; elasticity etc. is called as?

Last Answer : Vulcanisation

__________ possesses viscoelastic properties. (A) Cork (B) Glass (C) Graphite (D) Rubber

Description : __________ possesses viscoelastic properties. (A) Cork (B) Glass (C) Graphite (D) Rubber

Last Answer : (D) Rubber

Pick out the wrong statement(A) Cold rubber (SBR) is superior as compared to hot rubber (SBR)(B) Polymerisation temperature can modify the properties of SBR(C) Production of cold SBR employs lower pressure as compared to that ofhot SBR(D) None of these

Description : Pick out the wrong statement (A) Cold rubber (SBR) is superior as compared to hot rubber (SBR) (B) Polymerisation temperature can modify the properties of SBR (C) Production of cold SBR employs lower pressure as compared to that of hot SBR (D) None of these

Last Answer : (D) None of these

Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin

Last Answer : (D) Brass, cast iron, mild steel and tin

The vibration isolating materials are A. Aluminum B. Mild Steel C. Rubber, Cork D. None

Description : The vibration isolating materials are A. Aluminum B. Mild Steel C. Rubber, Cork D. None

Last Answer : C. Rubber, Cork

Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) The damping capacity of a material is due to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Description : Pick out the correct statement. (A) Materials exhibiting high elasticity obey Hooke's law (B) The elastic behaviour of rubber under compression is the same as its behaviour under tension (C) ... to its plastic deformation (D) The stress required to cause plastic flow in polycrystalline material is

Last Answer : Option B

The polysulfide rubber impression materials are: A. Not sensitive to temperature when curing B. Quite sensitive to temperature when curing C. Less sensitive to temperature than silicone rubber D. The same sensitivity to temperature as silicone rubber E. None of the above

Description : The polysulfide rubber impression materials are: A. Not sensitive to temperature when curing B. Quite sensitive to temperature when curing C. Less sensitive to temperature than silicone rubber D. The same sensitivity to temperature as silicone rubber E. None of the above

Last Answer : B. Quite sensitive to temperature when curing

Give the raw materials, chemical reaction and industrial application for manufacturing of ammonium sulphate.

Description : Give the raw materials, chemical reaction and industrial application for manufacturing of ammonium sulphate. 

Last Answer : Raw Material for Ammonium Sulphate Ammonia + Sulfuric acid Or Coal + carbon monoxide +carbon dioxide + ammonia Or Ammonia + carbon dioxide + gypsum Chemical reaction for Ammonium sulphate ... application Used as or in Fertilizer an additive water treatment and /or cleaning additive

When do all the magnetic materials lose their magnetic properties? -Do You Know?

Description : When do all the magnetic materials lose their magnetic properties? -Do You Know?

Last Answer : answer:

What are the properties of diamagnetic materials ?

Description : What are the properties of diamagnetic materials ?

Last Answer : 1. They are repelled by magnets. 2. They are solid , liquid and pliable. 3. They have no religion of magnetic gravity. 4. They have no point. 5. Their magnetism or tendency is negative. . They have no hysteria. . Their magnetic penetration is u

Why do most materials have magnetic properties too weak to be detected easily?

Description : Why do most materials have magnetic properties too weak to be detected easily?

Last Answer : Feel Free to Answer

What are the physical properties of nonmetallic materials?

Description : What are the physical properties of nonmetallic materials?

Last Answer : Need answer

Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Description : Materials for rain-proof coats and tents owe their water proof properties to _____? A. Surface tension B. Viscosity C. Elasticity D. Specific gravity

Last Answer : ANSWER: A

Materials for rain proof coats and tents owe their water proof properties to – (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Description : Materials for rain proof coats and tents owe their water proof properties to – (1) Surface tension (2) Viscosity (3) Specific gravity (4) Elasticity

Last Answer : (1) Surface tension Explanation: Materials for rain proof coats and tents owe their water proof properties to Surface Tension. The surface of a liquid behaves like an elastic membrane and therefore, has a tendency to contract. This property of liquid is called Surface Tension.

When do all the magnetic materials lose their magnetic properties?

Description : When do all the magnetic materials lose their magnetic properties?

Last Answer : Strongly heated

Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability to be cast, rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature

Last Answer : (A) High strength to weight ratio

Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Description : Ceramic materials possess which of the following properties? a) Brittle and low dielectric constant b) Rigid and low dielectric constant c) Brittle and high dielectric constant d) Rigid and high dielectric constant

Last Answer : c) Brittle and high dielectric constant

The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard

Description : The materials which have the same elastic properties in all directions, are called  (A) Isotropic  (B) Brittle  (C) Homogeneous  (D) Hard 

Last Answer : (A) Isotropic 

Isotropic materials have the same __________ in all directions. (A) Induced stresses (B) Density (C) Elastic properties (D) Thermal properties

Description : Isotropic materials have the same __________ in all directions. (A) Induced stresses (B) Density (C) Elastic properties (D) Thermal properties

Last Answer : C) Elastic properties

Ferromagnetic materials owe their properties to __________ inner subshells. (A) Completely filled (B) Partially filled (C) Equally filled (D) Vacant

Description : Ferromagnetic materials owe their properties to __________ inner subshells. (A) Completely filled (B) Partially filled (C) Equally filled (D) Vacant

Last Answer : Option B

The compatibility conditions in terms of strains in a two-dimensional problem are associated with (a) Stresses (b) Forces (c) Properties of materials (d) Deformations

Description : The compatibility conditions in terms of strains in a two-dimensional problem are associated with (a) Stresses (b) Forces (c) Properties of materials (d) Deformations

Last Answer : Deformations