Description : A soil sample of mass specific gravity 1.92 has moisture content 30%. If the specific gravity of solids is 2.75, the degree of saturation, is (A) 95.4 % (B) 95.5 % (C) 95.6 % (D) 95.7 %
Last Answer : Option D
Description : A partially saturated sample of soil has a unit weight of 2.0 g/cm3 and specific gravity of soil particles is 2.6. If the moisture content in the soil is 20%, the degree of saturation is (A) 20 % (B) 77 % (C) 92 % (D) None of these
Last Answer : Answer: Option C
Description : The ratio of the volume of voids to the volume of soil solids in a given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content
Last Answer : (C) Void ratio
Description : The ratio of the weight of water to the weight of solids in a given mass of soil, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content
Last Answer : Answer: Option D
Description : A soil mass coated with a thin layer of paraffin weighs 460 g. When immersed, it displaces 299 cc of water. The weight of paraffin is 10 g. If specific gravity of solids is 2.5 and that of paraffin 0.9, the void ratio of soil, is (A) 0.55 (B) 0.60 (C) 0.65 (D) 0.70
Last Answer : Answer: Option B
Description : The ratio of the weight of given volume of soil solids to the weight of an equal volume of distilled water at the given temperature, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content
Last Answer : (B) Specific gravity
Description : A saturated soil sample has water content of 40% and specific gravity of soil particles 2.7. The void ratio of the soil, is (A) 0.4 (B) 0.52 (C) 1.08 (D) None of these
Last Answer : (C) 1.08
Description : Degree of saturation of a natural soil deposit having water content 15%, specific gravity 2.50 and void ratio 0.5, is (A) 50 % (B) 60 % (C) 75 % (D) 80 %
Last Answer : (C) 75 %
Description : The natural water content of the soil sample was found to be 40%, specific gravity is 2.7 and void ratio 1.2; then the degree of saturation of the soil will be (a) 100% (b) 69% (c) 87% (d) 90%
Last Answer : (d) 90%
Description : A sample of saturated soil has 30% water content and the specific gravity of soil grains is 2.6. The dry density of the soil mass in g/cm3 , is (A) 1.47 (B) 1.82 (C) 1.91 (D) None of these
Last Answer : (D) None of these
Description : A compacted soil sample using 10% moisture content has a weight of 200 g and mass unit weight of 2.0 g/cm3 . If the specific gravity of soil particles and water are 2.7 and 1.0, the degree of saturation of the soil is (A) 11.1 % (B) 55.6 % (C) 69.6 % (D) None of these
Last Answer : (B) 55.6 %
Description : A moist soil sample weighing 108 g has a volume of 60 cc. If water content is 25% and value of G = 2.52, the void ratio is (A) 0.55 (B) 0.65 (C) 0.75 (D) 0.80
Last Answer : (C) 0.75
Description : The ratio of the volume of voids to the total volume of the given soil mass, is known (A) Porosity (B) Specific gravity (C) Void ratio (D) Water content
Last Answer : (A) Porosity
Description : the water content of a fully saturated soil mass is 100%, then the voids ratio of the sample is (A) Less than specific gravity of soil (B) Equal to specific gravity of soil (C) Greater than specific gravity of soil (D) Independent of specific gravity of soil
Description : The porosity of a certain soil sample was found to be 80% and its specific gravity was 2:7; the critical hydraulic gradient will be estimated as (a) 0.34 (b) 0.92 (c) 1.0 (d) 1.5
Last Answer : (a) 0.34
Description : 260 g of wet soil was taken in a pycnometer jar of weight 400 g in order to find the moisture content in the soil, with specific gravity of soil particles 2.75. The weight of soil and remaining water filled in pycnometer without air ... is (A) 24.2 % (B) 18.2 % (C) 53.8 % (D) None of these
Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?
Last Answer : {
Description : If dry density, water density and specific gravity of solids of a given soil sample are 1.6 g/cc, 1.84 g/cc and 2.56 respectively, the porosity of the soil sample, is (A) 0.375 (B) 0.370 (C) 0.380 (D) 0.390
Last Answer : (A) 0.375
Description : the coefficients of volume change and compressibility of a soil sample are 6.75 × 10-2 and 3 × 10-2 respectively, the void ratio of the soil sample, is (A) 1.10 (B) 1.15 (C) 1.20 (D) 1.30
Description : The porosity of a soil sample having its void ratio equal unity would be (a) 33.33% (b) 50.0% (c) 66.66% (d) 75.0%
Last Answer : (b) 50.0%
Description : For determine the specific gravity of soil solids, using a pycnometer of 500 cc., the following data is available : Weight of dry empty pycnometer = 125 g Weight of dried soil and pycnometer = 500 g Weight of dried soil and distilled ... of soil solids, is (A) 2.0 (B) 2.25 (C) 2.50 (D) 2.75
Last Answer : (C) 2.50
Description : If voids ratio is 0.67, water content is 0.188 and specific gravity is 2.68, the degree of saturation of the soil, is (A) 25 % (B) 40 % (C) 60 % (D) 75 %
Description : PROBLEM EA Sample of moist soil has a water content of 20.0% and the moist unit weight of 21.09 KN/cu.meter. The specific gravity of the soil is 2.75. Compute the degree of saturation and the value of porosity?
Last Answer : two seconds
Description : A fundamental equation of void ratio (e), specific gravity (G), water content and degree of saturation (Sr ) is (A) e = /Sr (B) = eG/Sr (C) G = /S (D) Sr = /G
Last Answer : (A) e = /Sr
Description : Sanjay gets 72 % marks in examinations. If these are 864 marks, find the maximum marks. a) 1050 b) 860 c) 1225 d) 1200 e) 1500
Last Answer : Answer: D Let the maximum marks be s Then 72 % of s = 864 72/100 × s = 864 s = (846 × 100)/72 s = 86400/92 s = 1200 Therefore, maximum marks in the examinations are 1200.
Description : If water content of a soil is 40%, G is 2.70 and void ratio is 1.35, the degree of saturation is (A) 70 % (B) 75 % (C) 80 % (D) 85 %
Description : Pick up the correct statement from the following: (A) The phenomenon of quicksand generally occurs in the cohesionless soil (B) At critical hydraulic gradient, the saturated sand becomes quick (C) The critical gradient depends on the void ratio and the specific gravity (D) All the above
Last Answer : (D) All the above
Description : If the natural moisture content, the liquid limit and plastic limit of a soil sample are stated as 30.5%, 42.5% and 22.5% respectively, the ratio of liquidity index and plastic index, is (A) (B) ½ (C) 2 (D) 2½
Description : Pick up the correct statement from the following: (A) The void ratio in soils is defined as the ratio of the volume of voids to the volume of solids (B) The bulk density of a soil is defined as the ... of a soil is defined as weight of solids to the total volume of the soil (D) All the above
Description : Pick up the correct statement from the following: (A) O.M.C. refers to the moisture corresponding to the maximum point on the moisture content dry density curve (B) The line which shows moisture content dry ... void line (C) The free fall of hammer for compaction is 30.5 cm (D) All the above
Description : According to the Indian Standards the specific gravity is the ratio of the unit weight of soil solids to that of water at a temperature of (A) 17°C (B) 23°C (C) 27°C (D) 30°C
Last Answer : (C) 27°C
Description : The void ratio of a soil sample decreases from 1.50 to 1.25 when the pressure is increased from 25 tonnes/m2 to 50 tonnes/m2 , the coefficient of compressibility is (A) 0.01 (B) 0.02 (C) 0.05 (D) 0.001
Last Answer : (A) 0.01
Description : A coarse-grained soil has a voids ratio 0.75, and specific gravity as 2.75. The critical gradient at which quick sand condition occurs, is (A) 0.25 (B) 0.50 (C) 0.75 (D) 1.00
Last Answer : (D) 1.00
Description : The water content of soil is defined as the ratio of (A) Volume of water to volume of given soil (B) Volume of water to volume of voids in soil (C) Weight of water to weight of air in voids (D) Weight of water to weight of solids of given mass of soil
Description : The general relationship between specific gravity (G), weight of water ( ), degree of saturation (Sr ), void ratio (e) and bulk density ( ), is (A) = (S - eSr ) /(1 + e) (B) = (G + eSr ) /(1 + e) (C) = (1 + e) /(G + Sr ) (D) = (1 - Sr ) e/(G + Sr )
Last Answer : (B) = (G + eSr ) /(1 + e)
Description : The critical exist gradient of seepage water in soils, increases with (A) An increase in specific gravity (B) A decrease in specific gravity (C) A decrease in void ratio (D) Both (a) and (c)
Description : For determining the moisture content of a soil sample, the following data is available Weight of container = 260 g, Weight of soil sample and = 320 g container, Weight of soil sample (dried) and = 310 g container. The moisture content of the soil sample, is (A) 15 % (B) 18 % (C) 20 % (D) 25 %
Last Answer : (C) 20 %
Description : Pick up the correct statement from the following: (A) A highly absorptive aggregate reduces the workability of concrete considerably (B) The specific gravity of aggregate is important for the determination ... and porosity of an aggregate influence the property of the concrete (D) All the above
Description : The ratio of volume of water present in a given soil sample to the total volume of voids in it is known as a) Percentage of air voids b) Degree of saturation * c) Void rat
Last Answer : b) Degree of saturation *
Description : If the specific gravity and voids in soil sample are G and e respectively, the hydraulic gradient i, is (A) (G - 1)/(1 + e) (B) (G + 1)/(1 - e) (C) (1 - G)/(1 + e) (D) (1 + G)/(1 + e)
Last Answer : Answer: Option A
Description : If the volume of voids is equal to the volume of solids in a soil mass, then the values of porosity and voids ratio respectively are (A) 1.0 and 0.0 (B) 0.0 and 1.0 (C) 0.5 and 1.0 (D) 1.0 and 0.5
Last Answer : (C) 0.5 and 1.0
Description : The ratio of the volume of water present in a given soil mass to the total volume of its voids, is known (A) Porosity (B) Void ratio (C) Percentage voids (D) Degree of saturation
Description : PROBLEM GThe moist unit weights of the soil are 105.73 pcf and 112.67 pcf, and the respective degree of saturation are 50.0% and 75.0%, compute the values of thevoid ratio, porosity, and specific gravity of the given soil?
Last Answer : Pressuron theory (2013) by Olivier Minazzoli and Aurélien Hees
Description : 200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 10 -3 kg/m2 .s. The initial ... moisture/kg dry solid). (A) 0.5 (B) 0.05 (C) 0.1 (D) 0.15
Last Answer : (C) 0.1
Description : In a laboratory test run, the rate of drying was found to be 0.5 x 10 - 3 kg/m2 .s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry ... of the solids from 0.3 to 0.2 (dry basis) is (A) 2000 (B) 4000 (C) 5000 (D) 6000
Last Answer : (C) 5000
Description : The specific gravity of coal depends mainly on its __________ content. (A) Carbon (B) Volatile matter (C) Ash (D) Moisture
Last Answer : (C) Ash
Description : Hydrometer is used to determine (A) Specific gravity of liquids (B) Specific gravity of solids (C) Specific gravity of gases (D) Relative humidity
Description : Pick up the incorrect definition from the following: (A) Ratio of the compressive strength of unconfined undisturbed soil to that of remoulded soil, is known as the sensitivity of the soil sample (B) The ... content at which a soil flows, is known plastic limit of the soil (D) None of these
Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The heat treatment cycle is as follows; Increase temperature from 30 OC to 850 OC in 3 hours. ... efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50
Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30) = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8